Actuators Dealers in Vadodara

• Structure: Ball
• Pressure: Medium Pressure
• Valve Motion: Rotary Motion Valve
• Model Name/Number: CN7505,CN7510
• Brand: honeywell

We have carved a niche in the market as the Manufacturer, Exporter, Importer, & Supplier of Linear Actuator based in Gujarat, India. The Linear Actuator we offer is fabricated in our fully equipped production facility under the guidance of experts. We manage a huge stock of the Linear Actuator in our spacious warehouse to address bulk requirements. We are offering our range of Linear Actuator at nominal prices.

100% UPTIME & HIGH PRODUCTIVITY The filter works efficiently without any chaos and the production line runs smoothly without any rundowns. Consumption of power is reduced due to the pressure drops and flow rates prevailing in the filter. Which also indicates an increase in the profit margins due to a reduction in energy costs. Whatever liquid material you have, you just need to set the timer and your production will flow non-stop and get a wonderful result.

• Packaging Type: Black
• Material: Glass fiber

Specifically designed for DJI phantom aerial photography. Works good to eliminate high frequency vibration and low frequency vibration. Package list: 2 x Glass fiber anti Vibration Plate 4 x Rubber Ball 1 x Screw Sets

The two pack epoxy coating is done on a Hard Anodized surfaceof the Aluminium body by the spray technique. It produces a 100muthick layer (only external surfaces). This epoxy coating helps inprotecting the actuator from extremely corrosive environments.Choose this option specially for alkaline environments. It is alsosuitable for environments like Ammonia, Ammonia Liquor etc. ROTEX

Steering actually controls the direction of an automobile and it is really very important for safety and speed because it actually is the only control in your hand when you''re driving and if you look at old cars almost all of the weight was controlled by steering and it was very simple. Moreover, automobiles of these days are equipped with very complex for engineers but are very comfortable for the drivers. Most commonly steering systems are rack & opinion and re-circulating ball steering systems. In the rack and pinion steering mechanism, the steering wheel turns the pinion gear which moves the rack from side to side. The rack is sort of a linear gear which meshes with the pinion. This movement applies steering torque to the pivots of the steered wheels through the tie rods and the short lever steering arm. The re-circulating ball mechanism is found in older vehicles and is a variation on the older worm and sector design; the steering column turns the screw which meshes with a gear causing it to rotate about its axis which also moves the pitman arm which is connected to the steering linkage.

‘Flowell’ offers complete range of Double Acting and fail safe Single Acting Spring Return Actuators. These can be used for automation of quarter turn valves such as Ball, Butterfly, Plug Valves, dampers and other parts requiring 90 Degree Actuation.   Rack & Pinion Design with Anti Blow out Proof Pinion Both Double Acting and Spring Return Fail Safe Actuator available. Hard Anodised Aluminum Body. Pinion Made of Nickle plated alloy steel. Trouble Free Life for more than 5,00,000 Operations Double acting can be converted to Single Acting by just adding Springs. Actuator Factory Lubricated for Normal Life. Actuator Sizing for Inlet Air Supply from 2.5 Bar to 8 Bar. Standard Temperature Range -20 oC to 80 oC. Can also be supplied with Viton Seals for temperature 150oC Namur Mountings for mounting of Solenoid Valve, Limit Switch ISO Drilling Suitable for Direct Mounting on ISO Pad CCW As shown in the Figure CCW the compressed air is given from the Port A, the left and right plungers move reversely, the output pinion rotates counter-clockwise, and the air at the sides of the both plungers exhausts from B.   CW As shown in the Figure CCW the compressed air is given from the Port B, the left and right plungers move to the center, the output pinion rotates clockwise, and the air between the two plungers exhausts from A.   2. Travel Adjustment Have adjustment range of ±5°for the rotation at 0°and 90°

We are offering scotchyoke pneumatic actuator features : - heavy duty scotch yoke actuator - extra heavy duty travel adjustment bolts can withstand high impact & easy to adjust - the actuator can easily be converted to fail open from fail close - needle bearing, flexi joint, and the hardened yoke thrust pin bearing, are all incorporated into the actuator for longer, smoother operation. - the rotex drs actuator gives you greater efficiency and higher torque output, with less maintenance - superior design with lower costs

• Brand Name: Auma
• Structure: Open close/ Modulating
• Country of Origin: 230 V AC
• Actuator Type: Electric Actuator

Gas driven system Storage tank for manual override Electrically or mechanically operated Large range of operating system is available GOV can be installed on DRS, DRV, HYV or any other make of actuators All pressure parts are as per PED and available with certification

• Brand Name: ROTEX
• Country of Origin: India
• Purity: Ideal For Setting The Closed Position Of The Butterfly Valve,Set The Closing Position Against The Pinion,10 Degree Over Travel Setting Possible For Closing,Strong Machined Cam For Locking,5 Degree Under Travelling Can Be Adjusted,Large Bearing Area To Red
• Material: Metal
• Number Of Flower: Pneumatic Actuator
• Packaging: Box
• Application: Setting Closed Position Of Butterfly Valve
• Power Source: Electric
• Compatibility: Butterfly Valve

We are offering pneumatic actuator-3, features : - ideal for setting the closed position of the butterfly valve - set the closing position against the pinion - 10 degree over travel setting possible for closing - strong machined cam for locking - 5 degree under travelling can be adjusted - large bearing area to reduce load - high tech polymer for low friction - non buckling modular spring design - standardisation of mounting accessories.

• Number Of Flower: Double Rack & Pinion
• Pressure: 5 to 10 BAR
• Model: ARM
• Design: ISO 5211
• Actuator: Single / Double Acting
• Mounting: Numur
• Rotation Angle: 90°
• Body: Aluminium Hard Anodized
• Seals: Nitrile / Buna - N
• Temprature: -20 °C & 90 °C
• Torque: Upto 160Nm at 6 kg/cm2 (Pneumetic pressure)

• Certification: ISI Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting
• Material: Die Cast Aluminum
• Port Size: 1/4"
• Input Current: 4-20 mA
• Input Pressure: 1.4kg/cm2
• Quality: Optimum Quality

The Electro-Pneumatic Positioner GT-100L is used for operation of pneumatic linearvalve actuators by means of electrical controller or control system with an analog output signal ofDC 4 to 20mA or splitranges.

• Diaphragm Actuator: SS Actuators

Actuator, INSULATIONS & COATINGS, Gasket, Welding Items, Pressure Gaug

Electrical Actuator, Manual Lug Type Butterfly Valve, Solenoid Valv

Actuator for Air Damper, Gas Analyzer Carbon Monoxide And Oxygen Kigaz5

Rotork make electrical 3ph & single ph acdc actuators, hydro-electric actuators, valve operation gear box, supply & service of complete actuators and its spares.

Linear Actuator

Stainless Steel Actuator, Weather Proof Limit Switch Bo

Cylinder Actuator, V Ball Control Valve

Ball Valve Actuators, Automotive Fluid Connector, Valve Automation Syste

Pneumatic Actuator, Flow Meters, Electric Actuators, VFD Control Pane

Electric Actuators, Pneumatic Actuators, Knife Gate Valve, Ball Valv

Pneumatic Actuators, Electric Actuator Valves, Pneumatic Product

Gas over Oil Actuators, Automotive, 2 Port Solenoid Valve

Actuators, Knife Gate, Check Valve

Rack And Pinion Actuator