Gas Analyzers Dealers in Vadodara

The Touch Screen GC System Model Dhruva  S2TS (NTPC & ERDA Approved) is configured For Dissolved Gas Analysis of transformer oil. It Can Be Built To  Meet The Specification / Standards As Per ASTM D 3612  Section A or C or IEC 60567, 2005 Section 7.3 or 7.5 as required by the user. This equipment can be used to detect the incipient fault in the transformer  and  arrest deterioration/damage to the transformer insulation by analyzing gases dissolved in the transformer oil and adopt preventive measures. Gas Chromatography method is used for detection for the dissolved gases and identification of incipient faults. The most significant gases generated by decomposition of oil deterioration, of paper insulation on the conductor are hydrogen, methane, ethane, ethylene,  acetylene, CO , Carbon di-oxide, Oxygen & Nitrogen. The quantities of these gases dissolved in transformer oil vary depending upon the type and severity of fault condition such as arcing, partial discharge, overheating, low-high temperature hot spot etc. The process involved is separation, identification and quantitative determination of gases.The Dhruva S2TS analyzes the fault gases in a single injection with gases analysed depending upon user ordering.   Innovative & Advanced Features : Color Touch Screen control with optional control over TCP-IP using FTP protocol Meets  ASTM D 3612  Section A or C or IEC 60567, 2005 Section 7.3 or 7.5 as required by the user. 10 or 40  Vial Head Space Auto Sampler (Choice of Manual Head Space Sampling as per Section C / 7.5) . Auto tuning PID temperature control for up to 8 channels with 2 programmable zones & 6 isothermal zones. EPC for up to 8 channels with 2 programmable zones & 6 single set point control with 0.25% FSD accuracy. Up to 12 auxiliary device control with 4 step programming for control of GSV, Solenoids, Pumps, trigger, signals etc. Input status for Pressure, Remote start, Remote Stop, Door open along with 4 additional spare inputs. Programmable FID (Gain, Off Set, and Sensitivity – low, high) with time based sensitivity settings. Programmable TCD (Sensitivity – Low, Medium, High) with superb current stability & repeatability. Extensive Auto diagnostics & user friendly system control with User settable password protection. Multi mode screens with 6 pages of current status giving complete GC status with option for continuous looping of the system.

Based on our own proprietary Diode Laser Absorption Spectroscopy (DLAS)technology, LGA-2000 Laser Gas Analyzer is capable of continuous on-the-spot gas concentration measurement and monitoring. It Demonstrates the characteristics of in situ detection in lieu of sampling, high measurement precision, short Response time, easy installation and maintenance, and etc. Application fields: Metallurgy, Petrochemical industry, biochemical pharmaceutics, environmental protection and Waste management, aeronautics and astronautics and other situations where gas analysis are needed  

andy Oxygen Gas Analyzer : The Handy Oxygen Gas Analyzer are designed for accurate and reliable measurement of Oxygen in Air, Nitrogen, Argon, Hydrogen etc. Our Oxygen Gas Analyzer are based on state of art Galvanic Oxygen Sensors, and provide fast response. Our Oxygen Gas Analyzer require no periodic maintenance like replacing electrodes or electrolyte and can be calibrated using ambient air or standard calibration samples. A digital display provides direct percentage output readout. The power Source is a 9V battery. Use of C MOS integrated Circuits ensures low power consumption for long battery life. Model 101 is an Oxygen Monitor for general applications. Model 102 additionally has low Oxygen set alarm facility which is usually preset to 19.0 % intended for personal safety usage and warns if Oxygen level falls below acceptable to human system.   Specifications : Range : 0.0% - 25.0% with least count 0.1%.  Accuracy : + 2% full scale.  Response Time : 90 % in less than 15 Sec.  Display : LCD.  Sensor Type : Galvanic Power Source : One 9V battery.  Alarm System : Audio / Visual.  Weight : 400 Gms. approx. Special Feautres : Pocket Size .  Light Weight .  Easy to read Display.  Low Battery Indicator.  Audible / Visual Alarm. Accutate Disposable Galvanic Sensor.   Application :Gas Purity Check. Combuction Efficiency. Glove Boxes.Cryogenics . Microbiology  Metullargy.Chemical Engineering. Plastic Manufacturing.  Food and Beverages Packing.  Bio-Technology. Personal Sagety. Mines. Medical Respiratory Studies. Anaesthetic Monitoring. Baby Incubators..

BG 2100 is an innovative ISE Electrolyte and Blood GasAna|yzercomplementlng our existing ISE NG.The analyzer measures K+, Na+, Cl+, Ca++, pH, PCO2 and PO2 in whole blood, serum and plasma. The analyzer has a compact design, is easy to operate, economical and is virtually maintenance free. The aspirate probe has a self-cleansing mechanism affording enhanced operator safety, low carry-over and cross-contamination . 240 *128 dots LCD Display ' Soft, Keypad -200 pL Sample Volume -Whole Blood, Serum, Plasma - 65 Samples / hour Throughput Built-in Thermal Printer

We offer reliable moisture analyzers with a combination of features to suit individual needs and budget. In addition, our analyzing insturment offers superior sensitivity,speed of response, and calibration stability. Moisture analyzers of bts series are used for quick and precise determination of material humidity upon the basis of weight loss during drying of its small sample (thermo-gravimetrical method

Gas Analyze

Fuel Gas Analyzer, Capacitor Panels, Co Gas Detector, Control Panel

Gas Analyzer, Safety Shoes, COD Digester, Monitoring System, Digital Mete

Gas Analyser, Electromagnetic Flow Meters, Coriolis Mass Flow Meter

Ammonia Analyzers, CHCOD-810 portable COD analyzer, Phosphate Analyze

Gas Analyzers, Ammonia Cracking Gas Units, Industrial Gas Generator

Tail Gas Analyzer, Spectrophotometer, Sulphur Analyzer, Digital Gas Mixe

Combustion Nitrogen Gas Analyzer, Actuator for Air Dampe