Kabir Instruments & Technology Makarpura, Vadodara, Gujarat

We are offering water meter. :- • water meter conforming to international standard iso : 4064 and is : 77994, class – b , class – c. • horizontal flow, multijet, magnetically driven with unbreakable glass 360o rotating registration device. • suitable for: single and multi-unit houses, commercial buildings. • cold water temp. Up to 45o c

CONNECTION: FLANGED ASA 150#, TABLE-F, etcâ�¦ MOUNTING TOP â�� BOTTOM OR SIDE MOUNTED END FITTING: CS/S.S.304/S.S 316/P.P PROTECTIVE CHANNEL: M/C BEND CHANNEL BOX WITH POWER COATED/ M.S/S.S.304/S.S 316/FRP/PVC GLASS TUBE: HEAVY WALLED BOROSILICATE H-19 / H-25 / H -16 etc.. PACKING: 100% TEFLON VALVE: C.S./S.S.304/S.S. 316/P.P./M.S.+ PTFE/S.S.+PTFE PRESS RATING: UPTO 10 KG/CM�² TEMP RATING: UPTO 250 �ºC RANGE: UPTO 3 METERS IN SINGLE PIECE VACUUM: FULL VACCUME

Brand Name : KABIR

Country of Origin : VADODARA

We are offering tubular level indicator. Kabir” manufactures tubular level indicator (side mounted) with tie rod design, with scale or without scale, with or without inbuilt valves. It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc. :- 1. the top & bottom liquid chamber of indicator is made of solid bar & glass tube (borosilicate) is fully protected by box section made out of 2 mm thick m.s. Channel. The strength of the box is so good that even if a man stands on the indicator, supported at both ends, the tube remains intact. 2. we are using 100% ptfe (teflon) rope as packing to ensure positive leak tightness for full vacuum as well as 6 kg cm² service pressure. 3. as compare to reflex & transparent type level gauge, this tubular level indicator is light in weight. 4. it is available in single length of 2000 mm cc distance. We can extend the length by coupling 2 or more through coupler. 5. we are providing air vent plug at top & drain plug at bottom for taking sample. We can also provide inbuilt isolation valve on request. 6. it is simple and reliable device for direct reading in atmospheric or pressurized (below 5 kgcm2) tank application. 7. it eliminates trouble giving threaded joints of conventional gauge glass cock as hazardous chemicals start leaking. 8. glass tube (borosilicate boiler quality) is fully protected by guard rods or box section made of 'c' – channel. 9. offset constructed isolation valve on request. 10. the connection provided will be flanged screwed tc joint.

The "KiT" make tubular Level Indicator (Side Mounted) .It is a reliable device for reading the level of liquid. It is a simplest form of level indicator. These level indicators find wide application for level measurement in process tanks, batching tanks, vessels etc.

SPECIFICATIONS : Type : Reflex / Transparent Visibility : Full Visibility / Partial Visibility Liquid Chamber : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P Cover Plate : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P Gasket : CAF , PTFE , Graphoil , Non Asbestose Other On request Glass : Borosilicate Toughened of Indigenous � Temperature Range upto 150oC , Klinger / Illamdur Make Imported Temperature Range Upto 350oC, Other on request. � Designed for high pressure & temperature liquid storage tanks in petrochemicals, fertilizers, Pharmaceuticals & Chemical industries. � In reflex level gauges, the glass has precision groves cut inner side and mainly used for colorless liquids. � In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids. � Max. 3000 mm length in single piece. � Imported/indigenous glasses on request. � Frost free arrangement on request.

Brand Name : KABIR

Country of Origin : VADODARA

We are offering top mounted level indicator. Simple principle of mechanics and magnetism harnessed to offer an absolutely safe, reliable and trustworthy level indicator for dangerous and toxic liquids under high pressure and temperature. As the liquid level rises in the tank, the float is lifted up due to buoyancy. The float carries a stem attached to it and on the other side of the stem a magnet is fixed. The float stem moves inside an ss enclosure. External to this enclosure is a glass tube, which carries the magnetic capsule design (red & black colour) or rotating roller design. Due to magnetic attraction, the magnet on the float stem and the magnetic follower are coupled and move in union. As the float moves along with the liquid, the capsule also moves inside the glass tube, and the position of the follower can be read against the scale. Suitable for liquids : acidsalkaliessolventsoilslubricantsliquid gases stored in uderground or over ground tanks density sp. Gravity : minimum 0.6 viscosity : upto 250 cp design temperature

We are offering tank mounted view glass. “kabir” manufactures sight flow indicators which are most commonly used for monitoring liquid flow in pipelines without compromising the integrity of the piping system. Visual observation and supervision of the process flow stream are two of the main concerns. Single double window constructions, sight flow indicators are available in various figures & material. Cs ss made bodies with toughened borosilicate glass windows and standard units in flanged threaded connections provide immunity at higher temperature & pressures. These offer a quick, reliable and inexpensive way to affirm flow rate and direction, and monitor color and clarity in fluid lines. different construction & sizes, highly economical, versatile uses. easy - access bolt - on design. Used for major liquids. toughened glasses. no-leak guaranteed. when a problem occurs at certain points along the industrial process line, sight flow indicators are used to visually monitor and determine the flow of fluids. These affordable and easy-to-operate devices are installed directly in the process line and allow operators to qualitatively observe flow rate, direction, color and clarity. The readings are then viewed through a glass viewing lens. There are two ways to deploy sight flow indicators: individually at vital points along fluid lines where alterations, disruptions or contamination of fluids are supposed to have occurred or in banks, all together, where simultaneous monitoring of multiple fluid lines is necessary. type : glass window liquid flow indication temperature : 300 º c pressure : 20 kgcm² line size : up to 8 inches (200 mm) moc : cs ss glass : toughened glass version : double single window viewing or full view. Connection : flanged threaded.

“kabir” manufactures sight flow indicators which are most commonly used for monitoring liquid flow in pipelines without compromising the integrity of the piping system. Visual observation and supervision of the process flow stream are two of the main concerns. Single double window constructions, sight flow indicators are available in various figures & material. Cs ss made bodies with toughened borosilicate glass windows and standard units in flanged threaded connections provide immunity at higher temperature & pressures. These offer a quick, reliable and inexpensive way to affirm flow rate and direction, and monitor color and clarity in fluid lines. different construction & sizes, highly economical, versatile uses. easy - access bolt - on design. Used for major liquids. toughened glasses. no-leak guaranteed. when a problem occurs at certain points along the industrial process line, sight flow indicators are used to visually monitor and determine the flow of fluids. These affordable and easy-to-operate devices are installed directly in the process line and allow operators to qualitatively observe flow rate, direction, color and clarity. The readings are then viewed through a glass viewing lens. There are two ways to deploy sight flow indicators: individually at vital points along fluid lines where alterations, disruptions or contamination of fluids are supposed to have occurred or in banks, all together, where simultaneous monitoring of multiple fluid lines is necessary. type : glass window liquid flow indication temperature : 300 º c pressure : 20 kgcm² line size : up to 8 inches (200 mm) moc : cs ss glass : toughened glass version : double single window viewing or full view. Connection : flanged threaded.

Kabir manufactures sight flow indicators which are most commonly used for monitoring liquid flow in pipelines without compromising the integrity of the piping system. Visual observation and supervision of the process flow stream are two of the main concerns. Single double window constructions, sight flow indicators are available in various figures & material. Cs ss made bodies with toughened borosilicate glass windows and standard units in flanged threaded connections provide immunity at higher temperature & pressures. These offer a quick, reliable and inexpensive way to affirm flow rate and direction, and monitor color and clarity in fluid lines. Different construction & sizes, highly economical, versatile uses. easy - access bolt - on design. Used for major liquids. toughened glasses. no-leak guaranteed. When a problem occurs at certain points along the industrial process line, sight flow indicators are used to visually monitor and determine the flow of fluids. These affordable and easy-to-operate devices are installed directly in the process line and allow operators to qualitatively observe flow rate, direction, color and clarity. The readings are then viewed through a glass viewing lens. There are two ways to deploy sight flow indicators: type : glass window liquid flow indication temperature : 300 º c pressure : 20 kgcm² line size : up to 8 inches (200 mm) moc : cs ss glass : toughened glass version : double single window viewing or full view. Connection : flanged threaded.the basic applications of sight flow indicators are spread across several industries and include measuring levels of water, condensate, coolant, diesel, solvent, chemicals, alcohol, lube

Brand Name : KABIR

Material : PP,MS,SS

Application : LIQUID

Pressure : 20KG - 150 KG

Country of Origin : VADODARA

We are offering side mounted magnetic level switches. “kabir” make magnetic level switches is specially suitable for high and low level signalization or automatic level control (by starting & stopping pumps or opening & closing of valves) in vessels. Horizontal mounting type directly on vessel or on external chamber. Compact & rugged construction consisting of a free moving pivoted float assembly and a switch enclosure in non - magnetic material to achieve undisturbed magnetic flux. It employs dual magnets, one carried by the float arm and other by the contact carriers housed in the switch enclosure. A change in liquid level brings the like poles of dual magnets opposite to each other and resulting repulsion force ensures a changeover of contacts with snap action. The magnetic transmission is glandless, leaving no scope for leakages from vessel into switch housing. These switches are manufactured in various materials, enclosures & special features to suit broad range of media applications. They are designed to provide high repeatability and to minimizes effects of shock, vibration & pressure. Installation:- mounted internally or externally through a chamber. External mounting is resorted to, where space is a limiting factor or mechanical devices like stirrers operate within the tank. Besides, in applications like boilers, reaction kettles etc., with external mounting, isolating is possible for regular servicing. The switch is normally side-mounted, however for applications like slurry, top installation is preferred. The switch can be wired directly "to make or break electrical circuits", of burners, heaters, motor pumps, alarms and other such electrically operated devices. Wetted parts: moc : s.s.316s.s.304 p.p switch : reed switch micro switch having no+nc+c 230 vac connection : flanges , screwed

MOC : S.S.316 / S.S.304 / P.P OR FRP â�¢ Broad range of chamber styles â�¢ Fabricated non-magnetic chambers â�¢ ANSI and DIN flanges â�¢ Precision manufactured float â�¢ Bi â�� Color Rotating Roller type indicator â�¢ Red & Black Capsule design type indicator Applications:- â�¢ Feed water heaters â�¢ Industrial boilers â�¢ Oil water separators â�¢ Flash drums â�¢ Surge tanks â�¢ Gas chillers â�¢ Height up to 6 Meter in single piece design â�¢ Max. Temperature up to 3750 C (S.S.) and P.P Max 60oC, â�¢ Max. Pressure up to 130 Kg/Cm�² of S.S. and P.P 7 Kg/Cm2 Option:- â�¢ Level switches â�¢ Level transmitters with 4-20 mA output, Hart protocol , Digital Indicator in mm â�¢ Acrylic scale standard / SS. Scale optional â�¢ Customer scales.

Brand Name : KABIR

Country of Origin : VADODARA

“kabir” manufactures high performance magnetic level indicator. It is a single chamber design with 2”, 2.5", or 3" chamber diameter according to the application. There are twelve basic configuration styles, including top mounted models. “kabir” magnetic level indicators are produced in a wide range of materials of construction, including plastics. “kabir” also offers one of the most complete selections of process connection types and sizes in the industry. It may be equipped with a variety of level transmitters and switches, as well as, flag & shuttle indicators with or without stainless steel scales. This enables the “kabir” to be a complete level and monitoring control. a change of level in the process tank corresponds to a similar change within the chamber. In response to the level movement, the float moves accordingly, actuating the bi – color rotating roller or red & black capsule for visual indication. :- • broad range of chamber styles • fabricated non-magnetic chambers • ansi and din flanges • precision manufactured float • bi – color rotating roller type indicator • red & black capsule design type indicator :- • feed water heaters • industrial boilers • oil water separators • flash drums • surge tanks • gas chillers • height up to 6 meter in single piece design • max. Temperature up to 2500 c • max. Pressure up to 15 kgcm² :- • level switches • level transmitters with 4-20 ma output, hart protocol , digital indicator in mm or liter. • stainless steel scale standard • customer scales

Based in Vadodara, Gujarat, we are an esteemed manufacturer and supplier of Admittance Level Switches. Admittance Level Switch is used to measure level precisely. The Switch comprises of an evaluation unit and an immune coat probe which is usually mounted on the vessel. In order to achieve highest accuracy, the Switch makes use of 3-Electrode technique with a driven shield arrangement. The Calibration controls of these Switches are set-up in the evaluation unit, which also comprises of a special ten LED dot display. Our Admittance Level Switches are highly preferred by the clients, for their precision in measurements.   Detrails : Admittance based level switch with RF signal transmission between probe and evaluation unit via a co-axial cable with drain wire having driven shield arrangement to eliminate cable capacitance and drift due to change of cable capacitance with temperature. You can install the evaluation unit even far from the probe. The calibration controls are available in the evaluation unit. A special ten LED dot display/bar display simplifies calibration and indicates material trend in vicinity of the point level. The SLA...M Seriesswitch can be efficiently used to reduce the inventory as the same evaluation unit can be field configured either for High or Low level fail-safe detection. The SLA...M series Ignores build-up of service material between probe, the vessel walls and the coating. The level limit switch uses 3-Electrode technique with driven shield arrangement to achieve high degree of immunity.The measuring system for this level limit detection tool consists of an evaluation unit and an immune-coat probe that could be mounted either from the top or side of the vessel. The probe comprises sense and shield electrodes electrically isolated from the metallic tank by means of suitable insulators. The sense electrode of the switch and the vessel wall serve as the two electrodes of a capacitor with the service material as the dielectric. A change in material level causes a change in dielectric, which in turn causes a change in admittance of this tank capacitor.  The processed signal is used to energize or de-energize a relay whose output contacts are available for annunciation or control.  An accurate measurement of this change affords an indirect measure of the level of material in the tank. The evaluation unit measures the change of admittance accurately by using radio frequency (R.F.) technique coupled with coat immunizing circuitry. Many process industries viz. cement, power, steel, food, chemicals, fertilizer, sugar, detergent etc. have been using the SLA...M series for reliably measuring and self checking the level of service material which may include fine or coarse solids of low dielectric constant that have a tendency to stick.  A wide variety of probes with different mounting connections is available to suit various applications. We offer specially designed ceramic insulated rod / rope probe suitable for operating temperatures up to 600° C max.   Note :  Bar display is recommended for longer distance between probe and evaluation unit and for materials having tendency to absorb moisture. A wide variety of probes with different mounting connections is available to suit various applications. We offer specially designed ceramic insulated rod / rope probe suitable for operating temperatures up to 6000 C max.

Brand Name : KABIR

Certification : ISO 9000-2001

Country of Origin : VADODARA

We are offering rotameters. �kabir� make acrylic body rotameters are mainly used for water salt water, air, nitrogen, hydrogen, natural gas application. These are integrally machined cut in acrylic body from imported transparent acrylic blocks sheets. These are also suited with flanged or screwed connections and several options of material for the wetted parts. All our products are developed as per industry norms, using premium raw material and latest technology. In addition to this, our products can be customized as per the specifications detailed by the customers. :- metering tube : solid acrylic block. Body : imported transparent acrylic block. Wetted parts : m.s. s.s. p.p. teflon. End connection : s.s. 304316pvcppms scale : engraved on body. Packing : neoprene teflon silicon. :- model : kitabr temperature : max 70°c pressure : max 15 kgcm² available sizes : 15 nb to 100 nb flow ranges : 2.5 to 40,000 lph of water at ambient temperature and 0.1 to 750 nm³hr of air at ntp end connection : screwed flanged hose nipple orientation : bottom � top rear � rear accuracy : ± 2% of fsd accessories : high & low flow alarms

Material : PP,MS,SS,FRP

Brand : KABIR

Country of Origin : VADODARA

SPECIFICATIONS : Type : Reflex / Transparent Visibility : Full Visibility / Partial Visibility Liquid Chamber : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P Cover Plate : Carbon Steel , S.S.304, S.S.304 (L) , S.S.316 ,S.S.316 (L), P.P Gasket : CAF , PTFE , Graphoil , Non Asbestose Other On request Glass : Borosilicate Toughened of Indigenous �¢ï¿½ï¿½ Temperature Range upto 150oC , Klinger / Illamdur Make Imported Temperature Range Upto 350oC, Other on request. �¢ï¿½�¢ Designed for high pressure & temperature liquid storage tanks in petrochemicals, fertilizers, Pharmaceuticals & Chemical industries. �¢ï¿½�¢ In reflex level gauges, the glass has precision groves cut inner side and mainly used for colorless liquids. �¢ï¿½�¢ In transparent level gauge, the glasses are without groves and arranged at the front and rear of a slotted liquid chamber and mainly used for colored liquids. �¢ï¿½�¢ Max. 3000 mm length in single piece. �¢ï¿½�¢ Imported/indigenous glasses on request. �¢ï¿½�¢ Frost free arrangement on request.

Brand Name : KABIR

Country of Origin : VADODARA

Brand Name : Kabir

Material : MS/SS/PP

“kabir” manufactures pp sight glass sight flow indicators which are most commonly used for monitoring liquid flow in pipelines without compromising the integrity of the piping system. Visual observation and supervision of the process flow stream are two of the main concerns. Single double window constructions, sight flow indicators are available in various figures & material. Cs ss made bodies with toughened borosilicate glass windows and standard units in flanged threaded connections provide immunity at higher temperature & pressures. These offer a quick, reliable and inexpensive way to affirm flow rate and direction, and monitor color and clarity in fluid lines. different construction & sizes, highly economical, versatile uses. easy - access bolt - on design. Used for major liquids. toughened glasses. no-leak guaranteed. when a problem occurs at certain points along the industrial process line, sight flow indicators are used to visually monitor and determine the flow of fluids. These affordable and easy-to-operate devices are installed directly in the process line and allow operators to qualitatively observe flow rate, direction, color and clarity. The readings are then viewed through a glass viewing lens. There are two ways to deploy sight flow indicators: individually at vital points along fluid lines where alterations, disruptions or contamination of fluids are supposed to have occurred or in banks, all together, where simultaneous monitoring of multiple fluid lines is necessary. type : glass window liquid flow indication temperature : 300 º c pressure : 20 kgcm² line size : up to 8 inches (200 mm) moc : cs ss glass : toughened glass version : double single window viewing or full view. Connection : flanged threaded.

“kabir” make orifice plate with flange assemblies are employed for measuring the rate of flow or quantity of moving fluids like liquids, gases or steam. The orifice plates are designed as per bs1042-1981 iso 5167 & kabir standards. When a device such as an orifice plate in a pipe line through which a fluid is flowing, as static pressure difference exists between the upstream side & the downstream side of the device is geometrically similar to one on which direct calibration has been made, the conditions of use being the same, the rate of flow may be determined from a knowledge of the circumstance under which the device is being used.

KiT offers a complete range of Orifice plates for a variety of flow conditions for mounting between flanges for Carrier Rings and with RJ Plate Holders for mounting between RJ Flanges.

We are offering orifice flange assembly. The orifice plate with flange assemblies are employed for measuring the rate of flow or quantity of moving fluids like liquids, gases or vapours. The orifice plates are designed as per bs1042-1981 iso 5167 & kabir standards. When a device such as an orifice plate in a pipe line through which a fluid is flowing, as static pressure difference exists between the upstream side & the downstream side of the device is geometrically similar to one on which direct calibration has been made, the conditions of use being the same, the rate of flow may be determined from a knowledge of the circumstance under which the device is being used. technical specification orifice plate :ss 316 ss 314 monel line size :15 nb to 600 nb flanges :astm-a-105a182 s 316ss 314 monel. Optional :ibr approved flanges type of flanges :weld neck slipon socket� weld type of tapping :flange taps corner taps radius taps size of taps :12 inch npt (f) studs bolts :astm-a-193 gr b7 nuts :astm-a-193 gr 2h gasket :spiral woundcaf teflon

Number Of Flower : DP

Brand Name : KABIR

Material : SS,PP

Country of Origin : VADODARA

We are the leading manufacturer and exporters of our product. features Selected High Quality Material for durability Interchangeable Spare Parts for easy maintenance Magnetic drive with anti magnetic shield on demand High sensitivity, low pressure loss Vacuum sealed register for clear reading in longer run Online replacement of registe

We are offering metaltube rotameter. “kabir” make metal tube rota meter is a variable area flow meter model kit series is suitable for gas and liquid flow measurement even under high pressure and high temperature. Standard flow tube is in ss 316 and for corrosive applications the metal tube, orifice and float can be lined with ptfe. Kit series metal tube rotameter comes with optional limit switches and 4-20ma output. suitable for fluid : liquids & gases density sp. Gravity : up to 2.95 viscosity : up to 200 cp design temperature : up to 150°c design pressure : up to 25 kgcm² measuring range : 100 to 40,000 lph of waterliquid 3.3 to 1400 nm³hr of airgas at ntp line size : up to 4" nb available materials : ss304ss304lss316ss316l ptfe lined on ss connection : flanged to asabsdin tri-clover, standard screwed to bspnpt(mf) accuracy : ±2% of f.s.d. & ±1.0% on request

“kabir” make metal tube rota meter is a variable area flow meter model kit series is suitable for gas and liquid flow measurement even under high pressure and high temperature. Standard flow tube is in ss 316 and for corrosive applications the metal tube, orifice and float can be lined with ptfe. Kit series metal tube rotameter comes with optional limit switches and 4-20ma output. suitable for fluid : liquids & gases density sp. Gravity : up to 2.95 viscosity : up to 200 cp design temperature : up to 150°c design pressure : up to 25 kgcm² measuring range : 100 to 40,000 lph of waterliquid 3.3 to 1400 nm³hr of airgas at ntp line size : up to 4" nb available materials : ss304ss304lss316ss316l ptfe lined on ss connection : flanged to asabsdin tri-clover, standard screwed to bspnpt(mf) accuracy : ±2% of f.s.d. & ±1.0% on request

We are a high flying manufacturer and supplier of Pressure Transmitter based in Vadodara, Gujarat, India. Our Pressure Transmitter is widely used for measuring liquid or gas pressure of contaminated water, steam and other corrosive fluids. Some of the interesting features like advanced HVAC systems, reverse polarity protection, extended temperature range, pneumatic system makes our product highly popular. We accept order in bulk and deliver the same on time.   Details : The M5100 series pressure transducers from the Microfused line of MEAS, set a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The transducer pressure cavity is machined from a solid piece of 17-4 PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. There are no O-rings, welds or organics exposed to the pressure media. The durability is excellent. The M5100 exceeds the latest heavy industrial CE requirements including surge protection, and is over voltage protected to 16Vdc in both positive and reverse polarity. This product is geared to the OEM customer who uses medium to high volumes. The standard version is suitable for many applications, but the dedicated design team at our Transducer Engineering Center stands ready to provide a semi-custom design where the volume and application warrants.   Features :  Heavy Industrial CE Approval  Advanced HVAC Systems 100 V/m EMI Protection  Refrigeration Systems Reverse Polarity Protection  Automotive Test Stands Extended Temperature Range Industrial Process Control 1% Total Error Band  Pumps and Compressors Compact Outline  Hydraulic/Pneumatic Systems -40oC to +125oC Operating Temperature Range  Agriculture Equipment Energy Generation and Management   For custom configurations, consult factory. Notes :  Best fit straight line.  TEB includes all accuracy errors, thermal errors, span and zero tolerances. Per MIL-STD-810C, Procedure 514.2, Figure 514.2-2, Curve L. 1/2 sine per MIL-STD 202F Method 213B condition A.   CE Compliance : EN55022 Emissions Class A & BIEC61000-4-2 Electrostatic Discharge Immunity (6kV contact/8kV air) IEC61000-4-3 EM Field Immunity (30V/m)IEC61000-4-4 Electrical Fast Transient Immunity (1kV) IEC61000-4-5 Surge (1kV)IEC61000-4-6 Conducted Immunity (10V) IEC61000-4-9 Pulsed Magnetic Field Immunity (100A/m)   Ordering Information : M5131-000005-300PG Type (G = Gage) Pressure Port (2 = 1/4BSP, 4 = 7/16-20UNF Male O-Ring, 5 = 1/4-18NPT, Specials (nnnnn = Custom Drawing) Output (3 = 0.5 to 4.5V, 4 = 1 - 5V, 5 = 4 - 20mA, 6 = 0 - 5V, Connection (1 = 2ft Cable, 4 = Packard Metripak 150, 5 = Bendix, Pressure Range (300 = 300, 05K = 5000, 3.5 = 3.5) P = 7/16-20 Female with Integral Valve Depressor) 7 = 0 - 10V) Model : 6 = Min-Hirschman DIN 43650 Ind C, D = Binder) Units (P = psi, B = Bar) North America - Measurement Specialties 45738 Northport Loop West Fremont, CA 94538 Tel - 1-800-767-1888 Fax -1-510-498-1578 Sales -pfg.cs.amer@meas-spec.com Measurement Specialties - Europe Ltd. 26 Rue des Dames 78340 Les Clayes-sous-Bois, France Tel - +33 (0) 130 79 33 00 Fax - +33 (0) 134 81 03 59 Sales - pfg.cs.emea@meas-spec.com Measurement Specialties - China Ltd. F1.6-4D, Tian An Development Compound Shenzhen, China 518048 Tel - +86 755 8330 1004 Fax -+86 755 8330 6797 Sales -pfg.cs.asia@meas-spec.com

Brand Name : KABIR

Country of Origin : VADODARA

We are offer any shape of toughened glass like. Rectnagular, square, capsule shape, gauge glass , etc.

Brand Name : KABIR

Country of Origin : VADODARA