Measuring Instruments Dealers in Makarpura, Vadodara

Totalisers XC 22B :: 4 Digit, Preset Counter XC 41010B200NX :: 6 Digit, Multifunction, Quadrature input 2 Set Point scalable input RC 102A :: Rate Indicator & Totaliser (scalable input) RC 2106 :: Rate Indicator (scalable input) RC 2108 :: Rate Switch (scalable input)

We are offering water meter. :- • water meter conforming to international standard iso : 4064 and is : 77994, class – b , class – c. • horizontal flow, multijet, magnetically driven with unbreakable glass 360o rotating registration device. • suitable for: single and multi-unit houses, commercial buildings. • cold water temp. Up to 45o c

Acrylic Body Rotameter is essentially used in general in-line applications that involve gases and liquids. The design of the Acrylic Body Rotameter is made as per global standards and tested thoroughly to rule out any defects. Principle : Fluid flow takes place from bottom to top in the tapered Acrylic body Tube where the float moves up and down freely. The position where the float weight and buoyancy forces are balanced in proportion to flow rate is the place where the float positions itself. The instantaneous flow rate is measured by the Vertical position of the float, shown by the scale. Attributes : Tube made up of solid Acrylic blockPacking glands are externally adjustableResistant to abrasionRotated connections : 360o at 90oScale length : 180-200 mm Performance Accuracy +/- 2% F.S.D.Temperature Ratings Maximum Operating Temperature rating is 50 o CRepeatability0.5 %ConnectionsFlanged OR Screwed OR Triclover Joint OR Hose Nipple Rangebility 10:1Scale length180-200 mm

We are offering liquid low flow rotameter. description : flowtech variable area flow meters tiny rotameters are intended for general in line metering applications (i.e. For gas & liquid) for low flow measurement and for purging applications. These are available in acrylic body tube and glass tube design. These are working on the principle of variable area. The float moves freely up and down tapered acrylic body tube or glass tube with fluid flow from bottom to top. The float takes up a position where buoyancy forces and the float weight are balanced in proportion to flow rate. The vertical position of the float as indicated by scale is the measure of the instantaneous flow rate. low flowrotameters (acrylic / glass tube) suitable for low flow rate of air orliquid measurement. Available inss-316 / ss-304 / p.p / p>t>f>e. Lined construction. Generallyscrewed with flow control valve at inlet but flanged or hose connectionavailable. 10 lph to 160lph of water at ambient temperature & 20 to 5000 nlph of air at ntpcondition. Accuracy = 2%fsd panel mountedwith high & low flow switches available.

� 64 Channel Standard Network Video Recorder � 64 IP Channel Inputs with Recording at 720P � VGA, HDMI Outputs, 1/1 Audio I/O and 4/2 Alarm I/O � Save up to 50% on Storage with Adaptive Recording & Camera-wise Recording Retention � 1080P, 720P, D1 Resolution with H.264, MPEG-4 and Motion JPEG � CMS, Web Client, Thin Client for MAC, Mobile Application (IOS and Android) and TCP Based Health Status � 4 SATA HDDs Support (6TB Each) � 256 Mbps Throughput with 2 Gigabit Ethernet Ports � Local CMS by Cascading between any Recording Device � ONVIF and Major Camera Brands Support

Technical Specification: Suitable for purging or low flowrate measuring. The standard mounting is ¼" BSP rear, although several arrangement of flanged or hose pipe connections are offered on request.  

These are available for felt, paper, leather, foils etc. And come in 2 main frame sizes viz., 50 mm and 120 mm frame depth. The standard range of the Dial gauge is 10 mm or 20 mm in each of the 2 frame sizes.

The Saturated ECT (Eddy Current Testing) Probe is designed for high-performance, non-destructive testing of thick-walled conductive materials. These probes utilize a saturated eddy current method to achieve deeper penetration, making them particularly effective in detecting internal and surface defects, such as cracks, corrosion, and material degradation. They are ideal for use in industries like aerospace, power generation, and oil & gas, where safety and reliability are critical.Saturated ECT probes offer superior sensitivity and precision compared to traditional eddy current probes, ensuring that even subtle material imperfections are detected. Their robust design allows for effective use in harsh environments, including extreme temperatures and challenging surface conditions. This makes them indispensable tools for routine inspection and preventive maintenance.Key Benefits:Ideal for inspecting thick materials such as pipes and structural components.Effective at detecting subsurface defects like cracks and corrosion.Non-destructive testing ensures no damage to components. 

“FLOWTECH” Glass Tube Variable Area Flow Meters (Rotameters) are intended for general in-line and for By-Pass metering applications (i.e. for Gas & Liquid) where operating conditions are with the limitations of Glass metering tubes. It consists of a tapered tube, with a float inside that is pushed up by fluid flow and pulled down by gravity. The rotameters manufactured at Flowtech are ISO certified with the Single Piece (joint less) PTFE / PP claded end connections. For maximum durability various materials for construction like the enclosure of the rotameters is MS- Powder Coated, SS- Powder Coated or SS- Buffed and the glass used is Borosilicate and also it has thread less body making it complete corrosion free. We manufacture Glass Tube Rotameters in various sizes from ½” to 3” and with the range of 25M3/hr. Maximum visibility with high accuracy on a linear scale is one of the key features, accompanied with their Easy to maintain and Replace aspects which are suitable for on Line as well as By-Pass metering Installation.Flowtech Glass Tube Rotameters are adorned with the like Inductive Proximity Switch, Control unit, DIN Rail, Screwed fitting, Namur ABS housing, accepts the input of both 230 V AC/ 110 V AC and ability to be adjusted on Complete Span.Flowtech has Experienced R & D Department, Large Product Line and Good Financial Position & TQM along with ERP system to ensure best in class products and services to it’s not just domestic but International customers too.

Product Specification   FULLY AUTOMATIC WATER LEVEL INDICATOR USING MAGNET SENSORS. Indicates five levels of the tank. Each level can be indicated in percentage or can be re-callibrated in 'liters' or in 'feet'. MAGNET SENSOR MEANS MOST ADVANCE TECHNOLOGY : MAGNET SENSORS  USED TO CHECK THE LEVEL OF WATER ARE SHOCK PROOF, RUST FREE & THERE IS NO POSSIBILITY OF SALT DEPOSITION ON  IT. ............MOST USEFUL FOR LARGE TANKS OF TOWNSHIP OR SOCIETY OR MUNICIPAL CORPORATION........

CTA Timer/Counter/Tachometer is able to receive external input signals and calculate the times of events, frequency and driving speed. CTA can be applied to batch counting, total counting, length measurement, position control, accurate timing, rotation speed and so on. CTA Timer/Counter/Tachometer features easy and handy parameter settings and tuning and are certified by international standards CE and UL.

Noise Meter, Capacitor Panels, Co Gas Detector, Control Panel

TLM65 - TRUE LASER MEASURE (20M) 20m range Ideal for DIY use One touch operation

We are offering oxygen probe, probe specifications : output 0 to 1200 mv. Readout impedance % carbon sensors should be used with controlling, recording and indicating instruments having input impedance of 8 mega ohms or higher. Accuracy +- 0.05 weight percent carbon in normal operating range. Response time less than 1.0 second. Thermocouples type k, s, or r. Operating temperature 760°c to 1150°c . Length available 550mm, 650mm, 750mm, 850mm, 1050mm, 1250mm. 26.67mm od mechanical shock resists mild mechanical. Handle carefully. Immersion depth 3 inches minimum. Reference air uncontaminated air at maximum rate of 236 cc per minute (.5 scfh.) virap sales.

Digital Temperature Measuring Instruments, Process Control Instrument

Tank Level Indicator, Glass Tube Rotameter, Glass Tube Flow Meter

The Woltman type meters are designed for measuring bulk flows of cold hot potable water in commercial or industrial applications and distribution system monitoring. The meter complies with all relevant international quality standards, ISO4064 Class B specifications for forward flow installations in horizontal, vertical and inclined pipelines. Special Features: Dry Dial, Magnetic Transmission, Vacuum Sealed Register, Measuring accuracy conforms to ISO 4064 Class B, Low driving Resistance, Removable element Mechanism for easy online repair and Maintenance.