Measuring Instruments Dealers in Chennai

Specification Working Temperature  up to RT to 1000°C and 1400°C Sample size is 40mm with 5mm tolerance Any cross section Silicon carbide heating element from USA 1°C accuracy at dwell temp Rapid heating rate(1 to 20°C/min) programmable Suitable for nanotechnology applications  indigenized  Insulation Indigenous VBCC Make phase control thyrister controller Nippon PID programmable digital temperature indicator cum controller Fully computerized Control atmosphere optional

Floor Model Cash counting machine. Vacuum / suction technology. Speed 04 seconds / 100 notes.check mode, batch mode, free mode, add mode,stamp mode, auto/manual mode.diagnostic mode. Additional Customer Display - Voltage 230v/50hz . Power Consumption : 440 watts. Weigh:32Kgs. Dimensions : L : 375, B : 295, H : 825 mm

V - 30 is a very compact (7.1/2 " x 4" x 3") size Fully Automatic, Sturdy Note Counter with 3-digit display. It works on 230 VAC supply as well as on battery. It is supplied with separate A/c Adaptor. Counts efficiently both New and Old Notes.V - 30 is useful for cashiers in :V - 30 is priced economically for the benefits of End Users. Product Feature Stores, Malls, Shops, Jewelers, Hotels, Restaurants, Hospitals, Retailers, Municipal Offices, Govt. Offices, Railway Stations, S.T & Local Bus Depots, Cinema Halls etc. In short wherever Cash is transacted.

We are experts in supplying the standard, non-standard & customized of Dial Snap Gauge. Customer’s satisfaction is our atmost priority. We may compromise our price but will not compromise our quality of product and service. Made of Alloyed Steel and Tungsten Carbide Customized sizes available for checking of length and groove diameters etc. Available Range : 3 – 290mm

A pH meter is an electronic instrument measuring the pH (acidity or alkalinity) of a liquid (though special probes are sometimes used to measure the pH of semi-solid substances).

We are dealing in digital readout system, 1A DRO - battery operated Linear and Rotary option available Complete guided system available In-built sensor compatible with magnetic tape with 10µm100 µm res

Properly tensioned band saw blades cut straighter, longer. Durable construction: made with lightweight cast aluminum.Easy to use: attach to blade, apply tension and read the PSI

Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s, when an unknown printer took a galley of type and scrambled it to make a type specimen book. It has survived not only five centuries, but also the leap into electronic typesetting, remaining essentially unchanged. It was popularised in the 1960s with the release of Letraset sheets containing Lorem Ipsum passages, and more recently with desktop publishing software like Aldus PageMaker including versions of Lorem Ipsum.

The reliable, repeatable, accurate way to check bearings and overall vibration. Make go or no-go maintenance decisions with confidence. The Fluke 805 Vibration Meter is the most reliable vibration screening device available for frontline mechanical troubleshooting teams that need repeatable, severity-scaled readings of overall vibration and bearing condition. External sensor is also available to measure overall vibration but it’s an optional accessory. What makes the 805 the best choice?   A meter – not a pen – that measures overall vibration as well as specific variables like bearing condition and temperature, to provide a more complete picture.   A combination vibration and force sensor tip that compensates for user variance (force or angle) yielding accurate, repeatable readings.   A four-level severity scale and onboard processor calculate bearing condition and overall vibration using easy-to-understand textual alerts (Good, Satisfactory, Unsatisfactory, Unacceptable).   Sensor sensitivity can read a wide range of frequencies (10 to 1,000 Hz and 4,000 to 20,000 Hz) covering most machine and component types.   Straight-forward user interface that minimizes the user inputs to RPM range and equipment type. Features and Benefits   Innovative sensor design helps minimize measurement variations caused by device angle or contact pressure   Consistent data quality at both low and high frequency ranges   Four-level scale indicates severity of problems for overall vibration and bearing condition   Exportable data via USB   Trending in Microsoft® Excel using built-in templates   Overall vibration measurement (10 Hz to 1,000 Hz) for acceleration, velocity and displacement units of measurement for a wide variety of machines   Crest Factor+ provides reliable bearing assessment using direct sensor tip measurements between 4,000 Hz and 20,000 Hz   Colored lighting system (green, red) and on-screen comments indicate how much pressure needs to be applied to take measurements   Temperature measurement with Infrared Temperature Sensor increases diagnostic capabilities   On-board memory holds up to 3,500 measurements   Audio output for listening to bearing tones directly   External accelerometer support for hard to reach locations   Flashlight for viewing measurement locations in dark areas   Large screen with high resolution for easy navigation and viewing Use the 805 to check the following machine categories: (37 machine categories totally) Chiller (refrigeration)   Reciprocating (Open motor and compressor separate)   Reciprocating (Hermetic motor and compressor)   Centrifugal (Hermetic or Open Motor Fans   Belt-driven Fans 1800 to 3600 RPM   Belt-driven fans 600 to 1799 RPM   General direct drive fans (direct coupled)   Vacuum blowers (belt or direct drive)   Large forced draft fans (fluid film brgs.)   Large induced draft fans (fluid film brgs.)   Shaft-mounted intergral fan (extended motor shaft)   Axial flow fans (belt or direct drive) Cooling tower drives   Long, hollow drive shaft (motor)   Belt drive (motor and fan - all arrangements)   Direct drive (motor and fan - all arrangemetns Centrifugal Pumps Note: height is measured from grade to top motor bearing   Vertical pumps (12’ to 20’ height)   Vertical pumps (8’ to 12’ height)   Vertical pumps (5’ to 8’ height)   Vertical pumps (0’ to 5’ height)   Horizontal centrifugal end suction pumps – direct coupled   Horizontal centrifugal double suction pumps – direct coupled   Boiler feed pumps (turbine or motor driven) Positive Displacement Pumps   Positive displacement horizontal piston pumps (under load)   Positive displacement horizontal gear pumps (under load) Air compressors   Reciprocating   Rotary screw   Centrifugal with or without external gearbox   Centrifugal – internal gear (axial meas.)   Centrifugal – internal gear (radial meas.) Blowers   Lobe-type rotary blowers (belt or direct drive)   Multi-stage centrifugal blowers (direct drive) Generic gearboxes (rolling element bearings)   Single stage gearbox Machine tools   Motor   Gearbox input   Gearbox output   Spindles – roughing operations   Spindles – machine finishing   Spindles – critical finishing What is Crest Factor+?   Crest Factor+ is a new proprietary algorithm (or technology) that takes the confusion out of bearing assessment. The original Crest Factor is used by vibration analysts to identify bearing faults. It is defined as the ratio of the peak value/RMS value of a time domain vibration signal. A key limitation of the original Crest Factor algorithm is that it does not increase linearly as the bearing degrades, making it very difficult to determine the severity of mechanical issues. In fact, the Crest Factor can actually decrease as a bearing nears catastrophic failure due to large RMS values. In order to overcome this limitation, Fluke uses a proprietary algorithm known as Crest Factor+ (CF+). CF+ values range from 1 to 16. As the bearing condition worsens, the CF+ value increases, ensuring the user is easily able to recognize the severity of the problem. To make things even simpler, Fluke has also included a four-level severity scale that identifies the bearing health as Good, Satisfactory, Unsatisfactory or Unacceptable.

Programmable On Time & off time anywhere in the ranger of 23hrs:59mins:59secs 5 feedback monitoring of Errors from 3limit switches & level & pressure occurrence of error & retrieval of errors against real time are logged in the memory for later retrieval and analysis Retreval of the data collected is essential for the maintenance dept to monitor & correct the errors for normal operation else which leads to downtime of the vehicle or machinery

Polarimeter cell loading made easy with AutoFill option. The Autopol V Plus and the Autopol VI models can have the AutoFill option. The specs of these would be the same as the base model. This is an ideal solution for busy laboratories like Chemical, Sugar, pharma, Food & Beverage laboratories. The AutoFill feature is an excellent choice where multiple users share a polarimeter as it enclurages the user to properly clean and dry the polarimeter cell after each measurement. Laboratories who work with caustic chemicals, acids an bases that prefer to not load the polarimeter cell by hand will appreciate being able to just pour the sample right into the easy to load AutoFill chamber. The AutoFill features are as follows: No need to inject samples with syringes. Samples are just poured in the AutoFill sample well. Eliminate contact with acids and bases The correct amount of cleaning solvents are used for each cleaning Air dry is run for the correct amount of time to fully dry the cell Cleaning is made effort

Clamp-On Ultrasonic flow meters are designed for applications where a customer is unwilling or unable to cut into the process measurement line to install an in-line meter. Available in configurations for pipe line sizes from DN15 to DN4000 (12” to 160”), the Clamp-On Ultrasonic flow meter design offers a cost-effective means of measuring liquid flow through a pipe. With designs that can withstand up to 200˚C (392˚F), this Clamp-On Ultrasonic flow meter technology is ideal for liquids with limited solids or gas content. Because Clamp-On Ultrasonic flow meter mounts on the outside of the pipe, there is no need to worry about material compatibility with the process being measured or the pressure in the pipeline. Clamp-On Ultrasonic flow meter is ideal for users looking for a process measurement device that is easy to install and can maintain flow measurement for clean liquids.​

It's concentration of dissolved solid particles. Dissolved ionized solids, such as salts andminerals, increase the electrical conductivity (EC) of a solution.

Wide Measuring range from 2.5 to 100000 RPM, Extremely Light Weight.Ideal For Shop Floor Working, Range : 2.5 to 99,999 RPM (rmin), Resolution : 0.1 RPM (2.5 to 999.9 RPM)-1 RPM (over 1,000 RPM),Memory : Last value, Max. Value, Min. Value. Detecting Distance : 50 to 200mm2 to10 inch (LED)-50 to 500mm2 to 20inch (Laser)

The exact monitoring of dew point temperature in compressed air systems, dryers for plastic and other industrial processes is becoming increasingly more important. Te dew point transmitter EE371 with a measuring range -60...60°C Td (-76...140°F Td) is the ideal solution for such applications. The core of the transmitter is the humidity sensor of the HC series, developed by E+E Elektronik in thin-film technology.