Liquid Level Indicator Dealers in Chennai

Our Full Sight Flow Indicator is designed to give flow in any direction. It is widely recommended for low pressure lines. Further for colorless tubes it can fit with diptube. Full View Sight Flow Indicator can be assembled with toughened cylindrical (tabular glass). Features Standard safety and maintenance featureEasy operationLower costFlexibleModular design Used for Corrosive chemicalsAcidsColored liquids

The SLM3505 was designed to provide a single instrument solution for the Electric Utility System Protection Engineer and RelayCommunications Technician responsible for the alignment and maintenance of Power Line Carrier, Audio Tone and FSK Communications Systems. This multifunction instrument replaces all 4 existing Power Line Carrier Instruments in one for a fraction of the cost, all in a compact lightweight package. It is important to note that the requirement for a separate signal generator is no longer the case, the SLM3505 integrates the signal generator into the same chassis as the selective level meter.

Wherever physical conditions prevent a bypass type level measuring installation, a WEKA TLI product would be the preferred alternative. The TLI sensor is installed directly on the tank, and provides a reliable level measurement signal output that can be fed to a remote indicator or control system. A wide choice of standard accessories and fittings allow TLI sensors to be configured to meet virtually any tank level measurement requirement. These sensors can even be installed at the bottom of tanks, oriented vertically upwards. FEATURES They operate flawlessly in tanks with curved walls or other shapes without clear vertical access Unique capability to monitor liquid interface levels in virtually any tank size or shape (liquids with differing densities) Floats and magnetically actuated reed switch counterparts are accurate and repeatable Rugged design of the sensors makes the measuring principle the first choice for the toughest Navy applications for surface or submarine vessels Highly customizable: integrated temperature sensors, explosion protection, slosh tubes, special connections, mounting elements or special materials. Applications Consistent accuracy and rugged construction makes the measuring principle the first choice for the toughest Navy applications for surface or submarine vessels. Chemical and other process industries Shipbuilding Thermal Power Plants Hydraulic systems Railways Vehicular applications Petrochemical industries Refrigeration systems

We are a renowned Manufacturer and Supplier of Tubular Type Liquid Level Indicator in Tamil Nadu, India. Our team of adroit personnel designs it using premium stainless steel, carbon steel and others to make it in compliance with the international quality standards. It is extensively used to determine liquid level in high-pressure process tanks, pressure vessels & boiler. Be it a big order or small, timely delivery is ensured!Details : All Wetted parts S.S. 304, 316, M.S. & Carbon steel Heavy Duty Glass Transparent or Reflex Ball Check Holder Drain Arrangement High Temperature And Pressure Ball Check Holders: Design for glass breakage automatically shut off the flow of Process fluid to atmosphere Centre to centre distance Visible length Connection MOC & Medium Working Pressure & Temperature

This Water Level Indicator helps to monitor the level of the water tank through wireless method. It does not require any wiring or cabling between the Indicator and the Water Tank. The distance covers upto 1000 meters in open area and supports for 10 storey building/apartments. It gives alarm for low level and high level of the tank as an alert. It consists of Transmitter Module and Receiver Module. The transmitter module has to be installed near the overhead tank and the Receiver Module can be fixed in the desired location. Transmitter module works with 2AA Battery and the Receiver Module works with AC-DC Power Adapter. Helps preventing wall damps due to continuous overflow of water and helps avoid brawls with neighbours. Long range wireless water level indicator. Supports upto 10 storey building/apartments. Visual LED indications for 5 Levels. Buzzer alert when tank is Empty or Full. No Wiring required between Tank and Indicator unit. Tank unit runs on two AA batteries for more than a year. Low Battery Indication available. Long Life. Lowest Maintanance and Easy to Install. Package contains Sensors, Transmitter without battery, Receiver and Power Adapter

16 Character X 2 Line LCD backlight display Non Contact Level Measurement Accurate/Reliable measurement from 0.4m to 10m Inbuilt Temperature Sensor - Automatic Temperature Compensation Over Entire Temperature Range 10° Beam angle or minimum interference All plastic construction with Gold Coated Diaphragm All parameters programmable from keypad 6A Relay Output Builtin RS485 MODBUS (Optional) 4-20mA Optoisolated re transmission output Two relay outputs are provided

Tubular Level Gauge for visual liquid level observation is very common in process industry. It is a simple and reliable device for direct reading in atmospheric or pressurized tank applications. It is mounted parallel, along the side of tank. As the process level fluctuates, the level in the transparent glass tube changes accordingly and gives local liquid indication.

The RAVAS-SafeLoad uses information from a hydraulic sensor and a set of sensors that measures the moment forces from load center position and mast tilt, to present stability information in the display. A led bar below the weight display goes from green (safe lifting), via yellow, to red (unsafe lifting: risk of tipping over). The led bar stability indication is enhanced by the color of the weight display (green backlight in safe situations, red backlight in unsafe situations), and by a fork in the weight display that is divided in three segments, one of them blinking to indicate the load center position on the forks.An example: on a 2.5 Ton lift truck a load of 1.853 kg picked up close to the carriage plate might result in a weight indication of 1.850 kg in the display, against a green background, with the middle fork segment blinking for a load center point at 500-600mm, and four green LEDs lit up on the LED bar. However, the same load picked up at the fork tips will result in the same 1.850 kg in the display, but against a red background for unsafe lifting, with the right side fork segment blinking (LCP at 800 – 1.000 mm), the red segments on the LED bar lit up, and a warning buzzer going off.

Model : SL-4010 * Frequency & time weighting meet IEC 61672 class 2. * 35 to 130 dB, 3 ranges, Data hold. * A frequency weighting, Fast time weighting. * Size : 250 x 83 x 32 mm.     Model : SL-4012 * 30 – 130 dB, Auto range, Manual range. * Frequency & time weighting meet IEC 61672 class 2. * A & C frequency weighting. * Fast / Slow time weighting, Data hold. * Peak hold, Memory (max., min.). * AC output & RS-232. * Size : 268 x 68 x 29 mm.     Model : SL-4022 * Frequency & time weighting meet IEC 61672 class 1. * 30 to 130 dB, 3 ranges, Max. hold, Data hold. * A/C frequency weighting, F/S time weighting. * AC output, Internal 94 dB calibration. * Professional sound level meter. * Size : 260 x 87 x 36 mm.     Model : SL-4030 * Main specification meet IEC 61672 class 2. * A, C weighting, Max. hold,fast/slow time weighting, AC/DC output. * Range : 3 ranges, 30 to 130 dB. * Mini pocket size. * DC 9V battery (006P) or DC 9V adapter in.   Model : SL-4011 * Frequency & time weighting meet IEC 61672 class 2. * A, C weighting, Max., Data hold, fast/slow time weighting. * AC/DC output, Max. Hold. * Reset button for Max. hold. * Range : 3 ranges, 35 to 130 dB. * Size : 250 x 83 x 32 mm     Model : SL-4001 * Frequency & time weighting meet IEC 61672 class 2. * A, C weighting, Max. hold, Data hold, fast/slow time weighting, AC/DC output. * Range : 3 ranges, 30 to 130 dB. * Size : 245 x 80 x 35 mm.

Plastic Wedge, Geomembrane, Polycarbonate Products, Plastic Chi

Ultrasonic Level Indicators, PH Indicators, Temperature Indicator

Submersible Pump Starter, Control Panel Board, Electric Panel Boar