Liquid Level Indicator Dealers

Looking for trusted Built Indice2 Water Level Indicator with Dual Alarm suppliers? We are the perfect ones and capable of fulfilling bulk orders. We have online payment processing system to avoid security issues. In order to make it more reliable, we have maintained payment logs accessible for the convenience of our customers. Benefits : No need to Check Water Tank Level from Tank Four Level Water Indicator 25%, 50%, 75% & 100% of Water Tank Dual Alarm is to Alert when Tank is Full & when Tank is Empty. No Water Wastage & No Power Wastage Features : Our Device is made up of High Grade Platic which eliminate the risk of electric shock. Rust, Scale, and Maintenance free Magnetic level sensors. Switch to Turn ON/OFF Alarm. Maintenance Free & Long Life System.

Level Staff is a graduated aluminum rod, used with a leveling instrument to determine the difference in height between points or heights of points above a datum surface. It cannot be used without a leveling instrument. a range of levelling staffs including E-type, bar coded, standard invar and industrial Invar Levelling Staffs. Most of the staffs are sectional and so can be adjusted in length to allow for easy storage and transport. The aluminium staffs adjust with telescopic section inside each other, whilst the wooden versions use sliding slip joints or connections. Sizes: 4/5/6 metres.

Located in Delhi, India, we are a known wholesale supplier of Water Level Indicator. We specialize in catering to the bulk orders of Water Level Indicator with utmost ease. We have gained much appreciation among our customers for our products durability along with exquisite design and quality. Safe and timely delivery of the same is ensured with our advance transit facilities. Moreover, Water Level Indicator is available in affordable prices to break all budget constraints.

Casagrande type Porous Tube Piezometers are used for measuring and controlling pore water pressure in soil, rock and to monitor the construction control and stability in embankments, dams and reservoirs. A standpipe, with a porous piezometer tip connected at its lower end, is installed in a borehole. Bentonite andOR grout are used to seal the borehle above the "tip". The water level inside the "standpipe" is measured with the help of a Electronic water level Indicator, and corrosponds to the water pressure at the piezometer elevation. Permeability of soil in the vicinity of the tip can be determind, when required, by increasing the water head in the standpipe, and observing it's dissipation rate. Advantages:- (a) Ideal fordermining the piezometric level during routine site investigation. (b) Can also be installed after the completion of construction & theefore suitable for use in existing damsembankments.

This model is designed for water level indication of multiple (Up-to 4) tanks with audio buzzer at empty and full level of tanks. This show 5 level and flow status of each tank. This is suitable for residential houses and bungalows having multiple tanks. Variants: Pentacool-SOLO: This variant is for displaying 5 levels of single tank. Features It can display level of 1 to 4 tanks. The water display will be as follow: If The water level is below 20%, 1st LED will blink If the water level is above 20% but below 40% , 1st LED will glow If water level is above 40% but below 60%, 1st & 2nd LED will glow If water level is above 60% but below 80%, 1st, 2nd & 3rd LED will glow If water level is above 80% but below 99%, 1st, 2nd, 3rd & 4th LED will glow If the Tank is full 100%, it will glow all 5 LED. The low level can be set 20%, 40%, 60% & 80%. Whenever there is increase in water level of tank, it will indicate flow pulse in that tank. The buzzer will start in case of full or low level for 3 minuts. It will be off when BUZZER button is pressed.

Noise level meter, Our range of Sound Level Meters and Noise Meters spans simple instruments that provide the measurement of Sound Level, Integrating-Averaging instruments that provide Leq and occupational noise functions as well as precision data logging sound level meters with 1:1 & 1:3 real time octave band filters and in-measurement audio recording.

FEATURES* Large LCD display, easy to read. * Hold & Memory record ( max., min. )* Frequency weighting networks are designed to meet * Condenser microphone for high accuracy & stability.IEC 61672 type 2. * Peak Hold function for stored the maximum value.* Auto range & mamual range. * Warning indicator for over and under load.* A & C weighting networks are conformity to standards. * LCD display for low power consumption & clear read-* Fast & Slow dynamic characteristic modes. out even in bright ambient light condition.* AC output for system expansion. * Used the durable, long-lasting components, including* RS232 computer interface. a strong light weight ABS-plastic housing case.* Build in adj. VR is available for easy calibration. * Compact and light weight plastic housing.SPECIFICATIONSDisplay 52 mm x 32 mm LCD (Liquid Crystal Display), 5 digits.Function dB (A & C frequency weighting), Time weighting(Fast, Slow), Hold, Memory ( max. &min. ), Peak hold, AC & RS232 output.Measurement Range 30 – 130 dB.Resolution 0.1 dB.Accuracy Frequency weighting meet IEC 61672 type 2, calibrating input signal on 94 dB(31.5 Hz to(23 5 蚓) 8 kHz), then the accuracy of A weighting is specified as following:31.5 Hz – ± 3 dB, 63 Hz – ± 2 dB, 125 Hz – ± 1.5 dB250 Hz – ± 1.5 dB, 500 Hz – ± 1.5 dB, 1 kHz – ± 1.5 dB,2kHz – ± 2 dB, 4 kHz – ± 3 dB, 8 kHz – ± 5 dB.Characteristics of A & C.Frequency A weighting – The characteristic is simulated as “Human Ear Listing” response. Typical, ifWeighting Network making the environmental sound level measurement, always select to Aweighting.C weighting – The characteristic is near the “FLAT” response. Typical, it is suitable forchecking the noise of machinery (Q.C. check) & knowing the soundpressure level of the tested equipment.Frequency 31.5 Hz to 8,000 Hz.Calibrator B & K (Bruel & kjaer), multi-fuction acoustic calibrator, model : 4226.Microphone Electric condenser microphone.Size of microphone 1/2 inch standard size.Range selector Auto range : 30 to 130 dB.Manual range : 3 range, 30 to 80 dB, 50 to 100 dB, 80 to 130 dB, 50 dB on each step, withover & under range indicating.Fast – t= 200 ms, Slow – t = 500 ms,Time Weighting * “Fast” range is simulated the human ear response time weighting.(Fast & Slow) “Slow” range is easy to get the average values of vibration sound level.* The “Fast” & “Slow” time weighting range are designed to IEC 651 type 2 requirement.Output Signal * AC output – AC 0.5 Vrms corresponding to each range step.Output impedance – 600 ohm.* RS232 output.Out terminal Terminal 1 : RS232 computer interface terminal.Terminal 2 : AC output terminal.* Terminal socket size : 3.5 mm dia. phone socket.Calibration VR Build in external calibration VR, easy to calibrate on 94 dB level by screw driver.Operating Temp. 0 ℃ to 50 ℃ ( 32℉ to 122℉ ).Operating Humidity Less than 80% RH.Power Supply 006P DC 9V battery ( Alkaline or heavy duty type ).Power Consumption Approx. DC 6mA.Dimension 268 x 68 x 29 mm ( 10.6 x 2.7 x 1.1 inch).Weight 295 g/0.65 LB.Standard Accessories Instruction Manual ………………………………………..1 PC.Optional Sound Calibrator, model : SC-941 ( 94 dB ). SC-942 ( 94dB, 114 dB ).Carrying case : CA-06RS232 cable, Model : UPCB-02Application software, Model : SW-U801-WIN