Power Meters Dealers in Makarpura, Vadodara

• Brand Name: Rish
• Voltage: 2 x rated value for 1 sec, repeated 10 times at 10 sec intervals
• Nominal Input Voltage (AC RMS): Phase-Neutral 57.7 - 277V L-N (Line-Line 100 - 480V L-L)
• Max Continuous Input Voltage: 120% of rated value
• AC Auxiliary Supply: 110V AC -15%/+20% / 230V AC -15%/+20% / 380V AC-15%/+20
• DC Auxiliary Supply: 12 to 48V DC ± 10%
• Current: 20 x rated value for 1 sec, repeated 5 times at 5 min intervals
• Response time to step input Resolution: min 1 sec approx. 0.001 (4 digit)

• Accuracy: ±0.5% of F.S.D. ±1 digit (50Hz)
• Panel Cut-Out: 91mm W x 45mm H Zero
• Stability: ±1/2digits/IOC (TYP) Freq.
• Response: 10Hz to 10kHz
• Aux. Supply: 230 VAC + 10%@10VA
• Display: 3 \\ digits, 12.5mm LEDs
• P.F. Range: 0.1 (LAG) -1.0 -0.1 (LEAD)

Delta" have been the pioneers of Digital Wattmeters in India since 1981. During this period, virtually thousands of Delta's power measuring instruments have made their mark in very wide range of applications/industries. Now a series of compact (96mm x 48mm) wattmeters have been introduced, which have many advantages compared to similar available products in the market. Self-contained instruments - do not have external transducer boxes Very wide pi operating range: = +0.1 to 1.0 Extremely low insertion losses: does not require watt-loss error adjustments for potential and current circuits True-RMS type readout, takes care of current distortions with high harmonics Performance unaffected by supply frequency changes, ambient temp, variations, etc Two of these can be used, with ext. C.T.'s for 30-3Wire power measurements Applications range from appliance manufacture, lighting, motor/pump, transformers and other electrical equipment industries

• Voltage: 115/230/400 V
• Frequency: 50Hz
• Brand Name: Multitek
• Item Code: M600-XXX
• Rated In: 1 or 5 amp

Application Sub-station Metering Industrial Large Feeder Metering Load profile analysis. Sub-Metering Power generation Power Quality analysis. Comprehensive and Accurate Measurement 3-phase Voltage (L-N) 3-phase Voltage (L-L) 3-phase Current KW (3-phase and Total) KVAR (3-phase and Total) KVA (3-phase and Total) PF (3-phase and Total) Bidirectional KWh KVAh KVARh Frequency % THD Demand & MD Relay Outputs Options The SLM102 has four relay outputs, related at 3A. These can be used for alarm/trip events. The use of these relays is totally field configurable, for the parameter on which to operate, the value on which to trip, the delay offer which to trip and the value at which to open. This enables the SLM102 to be used as a maximum demand controller. Communication EthernetThe SLM102 has a standard Ethernet-TCP/IP connection. Multiple socket Ethernet connectivity enables the unit to respond to as many as 12 different requests. The SLM102 can act as a small web-server.This on-board web-sever, offers quick and easy access to basic measurement, without special software. Built-in web pages display a range of power, energy and basic power quality information through any web enabled device. It also supports MODBUS-TCP/IP protocol. Features Exceeds class 0.2 revenue accuracy in Power & Energy Metering. On board Ethernet port supporting TCT/IP protocol. Acts as a small web-server. Also supports MODBUS TCP/IP. RS485 port with MODBUS-RTU protocol. Demand Measurement: Fixed or sliding. KW or KVA. Harmonics measurement: All six waveforms upto 29th including THD. Bright Red LED display. Three rows of 8-digits each ensure unbroken display of even large energy register values. Four relay outputs for Alarm & Trip. Limits are field programmable. Event definition and logging. Datalogging of all parameters for load pattern analysis. 2 Mbytes memory on-board. USB 2.0 port to download logged data. USB 2.0 port based programming of field selectable parameters. Advance Measurement Features SLM102 also measures the minimum & maximum values and also allows definition of events, so that the user can define the parameter of interest, event definition value and related time delays. Voltage min/max. -3-phsae L-N Voltage min/max. - 3-phase L-L (applicable only for 3P3W) Current min/max. - 3-phase. Hz min/max. Active Power min/max. - 3-phase & Σ system Apparent Power min/max. - 3-phase & Σ system Harmonic Measurement SLM102 measures the odd harmonics for 3Ø voltages and 3Ø currents upto 29th, includidng THDs for each waveform. Data Logging The SLM102 has 2Mb on-board non-volatile memory. The unit has a user programmable log capacity, that is the log duration is site selectable. A complete electrical system snap-shot is saved, to be later downloaded using the USB 2.0 port, into a PC based utility supplied free by Trinity.

Power Factor Meter Applications : Control Panel Motor Control Centers Distribution Panels Genset Panels Plant Monitoring Control System Power Factor Meter - MP14 (48mm x 96mm) Single phase power factor meter 0.001 resolution Power Factor Meter - MP214 (72mm x 72mm) Single phase power factor meter 0.001 resolution Power Factor Meter - MP314 (96mm x 96mm) Single phase power factor meter 0.001 resolution

• Features: Wide spectral range, Excellent long term stability, Cosine corrected, Automatic transmission measurements, Select either power or transmission, Solar energy power or transmission

electronic energy meters, modems