Sight Glasses Dealers in Makarpura, Vadodara (13 products available)

“kabir” manufactures pp sight glass sight flow indicators which are most commonly used for monitoring liquid flow in pipelines without compromising the integrity of the piping system. Visual observation and supervision of the process flow stream are two of the main concerns. Single double window constructions, sight flow indicators are available in various figures & material. Cs ss made bodies with toughened borosilicate glass windows and standard units in flanged threaded connections provide immunity at higher temperature & pressures. These offer a quick, reliable and inexpensive way to affirm flow rate and direction, and monitor color and clarity in fluid lines. different construction & sizes, highly economical, versatile uses. easy - access bolt - on design. Used for major liquids. toughened glasses. no-leak guaranteed. when a problem occurs at certain points along the industrial process line, sight flow indicators are used to visually monitor and determine the flow of fluids. These affordable and easy-to-operate devices are installed directly in the process line and allow operators to qualitatively observe flow rate, direction, color and clarity. The readings are then viewed through a glass viewing lens. There are two ways to deploy sight flow indicators: individually at vital points along fluid lines where alterations, disruptions or contamination of fluids are supposed to have occurred or in banks, all together, where simultaneous monitoring of multiple fluid lines is necessary. type : glass window liquid flow indication temperature : 300 º c pressure : 20 kgcm² line size : up to 8 inches (200 mm) moc : cs ss glass : toughened glass version : double single window viewing or full view. Connection : flanged threaded.

• Size: 2"
• Brand Name: NRG
• Material: SS
• Application: LIQUID

MAKE                                                    : NRG GLOBAL    HSN CODE                                           : 90261020 TYPE                                                      : DOUBLE WINDOW Name of the Fluid                            : LIQUID Temperature                                     : 230  DEG C Pressure                                              : 5 KG/CM2 MOC (WETTEC PARTS)                   : SS316 FABRICATED FROM SCH 10 PIPE End Connection                                : SS316 FLANGE END ROTOR                                                  : SS316 BASE PLATE                                        : SS316 COVER PLATE                                     : SS316 GLASS                                                   : BOROSILICATE TOUGHENED GLASS HAVING 12 MM THICK Packing                                                 : VITON FASTNERS                                           : SS304 Process Connection                 : 32 NB ASA 150 # RF VISIBLE VIEW                                     : 50 MM F/F HIEGHT                                        : 180 MM

• Type: double window
• Brand Name: Indo Anushka
• Material: MS, SS304, SS 316
• Connection: Flange, Screwed
• Model Number: Multiview
• Place of Origin: India

In the process industry double window sight glass are used as an accessory in the pipeline or inlet or outlet of equipments to view the process fluid flow. Traditional double window sight glasses have the glass fitted between two flanges. Due to the inherent principle of tightening of flanges (opposite bolts are tightened one after the other), the glass by default remains stressed by unbalanced tightening torque from the fitting stage itself. This results into breakage during fitting or reduced life due to thermal expansion on an already stressed glass. Also in the traditional way of holding the glass, both the soft gaskets on both sides of the glass remains exposed to atmosphere resulting into the process fluid leaking out to atmosphere on the instant of the inside gasket failure. The capnut housing provided in the indoanushka make multiview for housing the glass enables a leak proof tightened housing without unevenly stressing the glass as the tightening is obtained by threading on the cap onto the nut and therefore the glass gets uniformly and gradually tightened resulting into negligible or no pre-stresses.
in this kind of a capnut housing arrangement, the inside gasket for the glass soft seating has no scope of getting exposed to atmosphere. In fact it results into the washer being placed inside a mould. Therefore even in situations of the gasket disintegrating it casts itself inside the housing thereby it results into a lifelong leak free situation.
multiview double window sight glasses are provided with clear view (visible diameter of the glass) of equal to or more than the size of the double window sight glass. In fact if required a clear view of one or two sizes higher that the size of the double window sight glass can be provided, therefore enabling the user to have as much a large view he requires.

Description tank mounted view glass size : 50 to 600 nb round square & rectangular shape moc : cs,ss 304 , ss 316.

Available in full flow view, double window flop, rotary drip & plain type. Suitable for different type of fluids. Features Type of Connection : Screwed or Flanged. Material of construction : C.I.,C.S., SS 316, SS 304 or any other depending upon availability Available Size : 15 NB to 150 NB.

in the process industry double window sight glass are used as an accessory in the pipeline or inlet or outlet of equipments to view the process or utility fluid flow. Traditional double window sight glasses have the glass fitted between two flanges. This results into breakage during fitting or reduced life due to thermal expansion on an already stressed glass. Also in the traditional way of holding the glass, the process fluid leaks out to atmosphere on the instant of the inside gasket failure. Due to these reasons the failure rate of traditional double window sight glasses remain very high and does not serve as a efficient tool for monitoring flow. traditional double window sight glasses have the glass fitted between two flanges. Due to the inherent principle of tightening of flanges (opposite bolts are tightened one after the other), the glass by default remains stressed by unbalanced tightening torque from the fitting stage itself. This results into breakage during fitting or reduced life due to thermal expansion on an already stressed glass. In the traditional double window sight glass, both the soft gaskets on both sides of the glass remains exposed to atmosphere resulting into the process fluid leaking out to atmosphere on the instant of the inside gasket failure. Glass gets dirty due to settling of dirt particles from inside and therefore after a limited time flow becomes unvisible. multiview has the glass housed in a specially designed “anti torque cap nut housing wherein the tightening is obtained by threading on the cap onto the nut and therefore the glass gets uniformly and gradually tightened resulting into negligible or no prestresses and a life long no glass breaking arrangement. In multiview the inside gasket for the glass soft seating has no scope of getting exposed to atmosphere. Therefore even in situations of the gasket disintegrating it casts itself inside the housing thereby it results into a lifelong leak free situation. Multiview can be provided with clear view (visible diameter of the glass) of equal to or more than the size of the double window sight glass therefore enabling the user to have as much a large view he requires. The deflector plates provided inside the multiview helps to create a vortex in the flow taking place inside the multivew. This helps in viewing the flow even under full bore flow conditions without any moving parts and also self cleans the glass from inside to provide a life long clear view  

Sight Glass is used for monitoring flow in pipelines for a wide range of applications. Sight Glass suitable for various rugged industrial applications. These Sight Flow Indicators are bi-directional type and easy to install in any orientation. alient Features of Tubular Type Full View Sight Glass Flow Indicator   Easy Maintenance  Lower Cost  Wide View Area to Inspect the Fluid  Tempered Borosilicate glass standard  Available in all most all M.O.C.  Glass Length available from 100MM To 200MM  Sizes Range from 15MM To 200MM  Pressure Rating PN 6  Design & Testing As Per Mfg. Standard  Flange Drilling as per ANSI B 16.5 / BS 10 Table / DIN / IS Std.

• Size: 0.5 inch to 10 inch
• Glass: Borosilicate glass tube oras
• Medium: Steam, Condensate
• End Connection: Flanged end, raised face
• Maximum service temperature: 200oC
• Maximum pressure rating: 25 kg/cm2

Double window sight glass is made from Borosilicate toughened glass in both side parallel to flow line. It is a flow indicator with a simple structure of two glasses on single cast, on the average body seems like a cross. It has two side flanges depending on customer requested standard dimensions. It is made to meet the process requirements. This type of flow indicator is used for spot inspection and view of the process parameter. By using different parts full assembly of double window type sight flow indicator complete. Gaskets act like the cushion for borosilicate round toughened glass and prevent leakages from joint of transparent glass and body structure. Sight glass body end connection can also be a threaded end. The body length is designed as per DIN EN 558-1 standard. Features Outstanding view to the flow and levels in the horizontal pipelines Withstand high temperature and high pressure Full vacuum service Smooth performance Corrosion resistant finish Applications For evaluating the function of steam traps in pipes Power plants

We have immense industrial expertise in offering the clients with Sight Glass that acts as a flow indicator. Moreover, the Sight Glass is also used for bio-directional purposes. The Sight Glass, which we offer, is easily installed in either vertical or horizontal orientation between diverse types of non-transparent line of a pipe. High reliability, quick operations and cost-efficiency are the features of our Sight Glass. Our Sight Glass is also suitable for colored liquids, corrosive chemicals and acids. Technical Specifications : MOC : cast steel, SS 304, SS316, SS 304L & SS 316LSize : End flanges as per ANSI B 16.5 /BS 10 /PN /DIN Std. - for 15 mm to 200 mmGasket : PTFE / CAFGlass : Tempered borosilicateSuitable up to 1250 Deg. CPressure up to Max 10 BarSimple and easy to replace the glass & heavy duty in construction Minimum Order Quantity : 01

• Shape: Capsule,Round,Rectangular
• Material: M.S,SS304,SS316,PP,PTFE
• Size: 1 - 12 Inch
• Model Name/Number: SG-100
• Brand: Petrotech
• Glass Type: Reflex,Transparent
• Pressure: 20 bar
• Temperature: 300 Deg C

glass tube flow meters, Magnetic Level Switches, borosil gauge glass tube

Full View Sight Glass, Displacer Type Magnetic Level Switch, Level Indicators

MS Sight Glass, glass heat exchangers, Fluorescent Tube Light Tube