Industrial AIR Conditioning System Dealers in Gidc, Vapi (58 products available)

Type : AC MOTOR

Color : GREY

Country of Origin : INDIA

Brand : LAXMI HYDRAULICS

Material : ALLUMINIUM / CAST IRON

Warranty : 1 YEAR

LHP MAKE AC INDUCTION MOTOR 

Wide range of high efficiency fans are manufactured to suite textile enviroment.Single inlet, double inlet and aero-foil bladed centrifugal fans handled a wide range of air flow and pressure requirements with lowest possible power consumptions.  

TEMP RANGE : -20 °C to + 20 °C

CURRENT : 2 AMPS

POWER SUPPLY : 220 V AC/ 50 HZ

chilling plant equipeed with hermetically sealed reciprocating, scroll or semihermetic compressor. chilling plant available with refrigerants r22, r134 a, r407c, r404a or r410a. systems available in tank n coil, shell & tube, plate heat exchanger or tube & tube type evaporator. system available with air-cooled & water cooled type condenser. high quality axial fan motor with low noise. in built water circulation pump as per required flow rate & pressure for application. equipeed with all electrical safety devices like compressor over heat protection, over current protection, over temp protection , phase sequence / phase missing protection, antifreeze protection. equipeed with all machenical safety devices like thermostatic expansion valve, solenoid valve, filter driers, low / high pressure protection, water flow protection, low water level protection.   note: due to continous up-gradtion and development the above specifications are subject to change without notice .  .

The conical shaped diffuser in the turbo head slows down the accept velocity and converts it in to a straight pressurized flow enabling users to reduce inlet pressure requirements for a given flow and velocity. In addition the spiral guide welded to the vortex pipe conveys the inlet down ward away from the inlet nozzle avoiding any flow disturbance and initiating the centrifugal process. Centricleaner operates at consistency range of 1.5 to 2% against normal cleaner range of 0.6 to 1% consistency. Centricleaner bottles are arranged in planetary system with inlet header at the centre, distributing pulp stock evenly to all centricleaning bottles at constant pressure. Accept of all centricleaner bottles also collected in planetary manner at the centre. Rejects collect in closed loop in the reject header directly connected to reject pump feeding to secondary stage cleaner. Deareation system also provided for approach flow cleaner to remove air from pulp stock. Bottom cone of Primary bottles provided with ceramic cone for improved life and for efficient separation of heavy contaminates from pulp stock. Flexi glass with quick release fitment provided between bottom ceramic cone and reject header for easy cleaning of nozzles. Dilution at middle of cone provided to increase centrifugal action at bottom cone increasing efficiency of cleaners. Secondary stage cleaner provided with in built tertiary stage and auto flushing in reject chamber for fiber recovery and efficient disposal of heavy contaminates from the system. Features : Can operate at lower inlet pressure. Inbuilt with spiral guide vanes at inlet nozzle to avoid turbulence losses. Inbuilt with DLR system. (Light reject & air removal system). Higher cleaning efficiency. Less plugging tendency. Uniform turbulent free flows and no cross flows. Minimum payback period. Less Floor area – bottles arranged in planetary design. Longer life of bottles – ceramic bottom cone with dilution nozzle. Ceramic cone provided with HDPE cove to avoid damage during handling. No reject nozzle jamming – Flexi glass reject discharge for easy cleaning. No civil works – reject collected in header avoiding reject tanks. Reduce thickener size up to 50%. Power consumption reduced up to 50% in centricleaning.

Material : HDPE, UPVC

Diameter : 40-50cm

Shape : Rectangular

Thickness : 5-10mm

Length : 150-200cm, 50-100cm

Color : Shiny Silver

All the wiring ducts are manufactured from high impact, self extinguish, wrap proof rigid PVC with lead free material. PVC material carries UL 94 flammability rating of V0 for excellent flame retardancy, continuous use temperature 50°C (122°F). Wiring ducts includes solid & slotted style, narrow slots/finger design provides more slot to closed fit the spacing of high density terminal block and other hardware. The wiring ducts are available in different sizes. Wiring-Ducts comes in standard colour of grey in 1 meter and 2 meter length. Other colour of wiring ducts are also available on request for an minimum order quantity (MOQ).

Material : Galvanized Iron

Finishing : Polished

Shape : Shape, Square

Color : Silver

Surface Treatment : Coated, Hot Dip

Certification : ISI Certified

Length : 015inches, 15-30inches, As per requirement

Grade : AISI, ASTM, BS, DIN, GB, JIS

Feature : Durable, Eco Friendly, Fine Finished, High Strength, Perfect Shape, Quality Tested

Outer Diameter : 100mm, 20mm, 40mm, 60mm, 80mm, As per requirement

Type : Galvanized Iron Duct

Thickness : 0-3mm, 12-15mm, 3-5mm, 5-7mm, 7-9mm, 9-12mm, As per requirement

Country of Origin : India

Color : AS PER CUSTOMER

Type : SHELF

Material : MS

Country of Origin : Made in India

Usage/Application : Refrigerator

  :  

We are supported by a reliable team of packaging experts who have immense experience in this domain and capable of catering to the standards and customized packaging requirements. Our entire range of products is produced as per international quality standards. Therefore, they are dependable and worth the price.   The baffles are normally plates with a single segmental cut. The cut is usually vertical to allow the condensate to flow along the bottom of the shell to the outlet. Double segmental baffles may be specified to achieve reduced pressure drop. The space between the baffles is determined by considerations such as: The tubes must be supported to avoid tube vibration; Pressure drop depends on vapor velocity, and hence on baffle spacing; The resistance to heat transfer due to the presence of noncondensing gases is inversely proportional to the vapor velocity. High vapor velocities can reduce resistance to heat transfer through the shear effect on the condensate film.   Thus, if adequate pressure drop is available, it may be possible to reduce baffle spacing to obtain increased heat transfer rates. The size of the baffle cut is generally chosen such that the vapor velocity in the baffle window is roughly equal to that in the overlap zone between the baffle plates. The number of tube passes is determined by the required coolant velocity. Plain tubes are generally used, though low-finned tubes can be used to obtain increased heat transfer rates when the condensate resistance to heat transfer with plain tubes is significantly greater than that of the coolant. The vapor vent should be situated at the end of the vapor flow path. It is possible to use other TEMA shell types, such as the J-type, to minimize pressure drop. A possible configuration for low pressure drop is the J-shell with double segmental baffles.

Controls of air perimeters like temperature, Humidity clean air, and air born bacterial infections in the critical industry like food, drugs or pharmaceuticals need tight control.

We are Supplier of this product.

Self contained factory assembled and fully automatic systems in varying size to suit conditions. designed to deliver a spray of HEPA filtered air at approximately 6000 FPM from adjustable nozzels in the celing & opposing walls to departiculate fully gowned personnel just before entering controlled areas.

Certification : ISO 9001:2008 Certified

Color : Black, Blue, Green, Yellow

Voltage : 110V, 220V, 380V, 440V

Condition : New, Used

Automatic Grade : Automatic

Power : 1-3kw, 12-15kw, 3-6kw, 6-9kw, 9-12kw

Driven Type : Electric

Warranty : 1year, 2year

Presssure : High Pressure, Low Pressure, Medium Pressure

Efficiency : 80-99.97 %

Flow Capacity Range : 500-1000 cfm

Shape : Rectangle

Size : 610 X 610 X 100 MM

Frame Material : Aluminium

We HEAT-COOL FIN INDUSTRIES are engaged in manufacturing if the industrial condensers which is made from high grade quality of the raw material. The condenser is known as the thermal unit which helps in condensing vapor into the liquid. To lessen the loss of the volatile components it is designed to offer the maximum cooling surface area. Industrial Condensers widely used in the power, engineering, food and many other industries. Some of Industrial Condensers noteworthy features are: Cost efficient Wide temperature tolerance Noiseless operation

Material : Cast Iron

Elbow : 90 Degree C

Size Range : 40 nb - 1000 nb

Wall Thickness : 5-10 mm

Features : Superior functionality,Durable finish standards,Low maintenance

We are the leading manufacturers, exporters and supplier of this products.

Size : 90 x 1000 Mm

Shape : Tube type

Color : White, Black

Material : Epdm, Silicom

Usage/Application : Air

Brand : Neotech

We are dealing best Cooling Tower supplying company.

Country of Origin : Made in India

Material : Plastic

Country of Origin : Made in India

Shape : Circular/Round

Usage/Application : Industrial