PH Meter Dealers

STP-02-b Digital pH Meter is having three point calibration at 4 , 7 pH and 9.2 value. It has auto temperature compensation . It has 9 VDC adaptore. It is bench top model used in laboratory purpose. Technical Specification • pH Range : 0 to 14.00 • Resolution : 0.01 • Accuracy : ±0.02 • Temperature range : 0 to 100°C • Calibration User selectable : Automatic calibration at 4,7,9 pH • Power : 9 VDC Adaptors • Typical Size (l x w x d) : 175 x 75 x 35mm • Weight : 250g   Technical Specification • Electrode stand • Temperature Sensor • pH Electrode • pH Electrode

We are a well-acclaimed Online pH Transmitter Manufacturer, Supplier and Exporter In India. Our Online pH Transmitter is known for its excellent service and reliability. The Online pH Transmitter is made from excellent quality components that are again made from reliable raw materials. Our Online pH Transmitter is easy to use and install that makes it a favorite among the buyers. Highlights Accurate calculationsDurabilityCost effectivenessLow maintenance Technical SpecificationsRangepH-2.00 to 16.00 pH ORP-2000 to 2000 mV Temperature-30 to 130.0oCResolutionpH0.01 pH ORP1 mV Temperature0.1oC (above -10 oC); 1oC (below -10oC)Accuracy @ 20oC pH±0.02 pHORP±2 mVTemperature±0.5oC (-9.9 to 130.0oC); ±1oC (-30 to -10oC) Input Impedance 1012 Ohm Digital Inputfor the pH/ORP/oCTransmitter RS485 Other DigitalInsulated Inputs two digital insulated inputs: one for hold and one for the advanced cleaning; ON state: 5 to 24 VDC Digital InsulatedOutput a digital insulated contact closed upon hold mode TemperatureCompensation automatic or manual, -30 to 130oC Temperature Probe with three-wire or two-wire Pt100/Pt1000 sensor (with automatic recognition and damage test) Power Supply 24 VDC/AC, 115 VAC ±10%, 230 VAC ±10% or 100 VAC ±10%; 50/60 Hz Power Consumption 10 VA Over Current Protection 400 mA 250V quick blow fuse Max. OscillationFrequency 8 MHz Relays 1, 2, 3, 4 electromechanical relay SPDT contact outputs, 5A-250 VAC, 5A - 30 VDC (resistive load); fuse protected: 5A, 250V quick blow fuse Alarm Relay electromechanical relay SPDT contact output, 5A - 250 VAC, 5A - 30 VDC (resistive load) fuse protected: 5A, 250V quick blow fuse Analog Output two independent outputs, 0 - 22 mA (configuring as 0-20 mA or 4-20 mA) Analog OutputResolution 0.1% f.s. Analog OutputAccuracy ± 2% f.s. Data Logging 6000 pH/oC or ORP samples Environment 0 to 50oC?(32 to 122oF); RH max 85% non-condensing Casing IP20 (housing); IP54 (front panel)

PH Electrode, Binocular Microscope, Monocular Microscope, Top Pan Balanc

PH Meter, Hplc, Ftir, Ovens, Incubator