Avartana Metal Powders Kancharapalem, Visakhapatnam, Andhra Pradesh

The high quality and high purity fine tungsten powders produced at JDPM are typically greater than 99.95% tungsten purity with average particle sizes up to 10 microns. These powders are used in powder metallurgy applications such as electrical contacts, heavy metal alloys, electronic heat sinks, mining tools and fabricated tungsten rod/bar. JDPM  produces tungsten powders that provide the purity and particle size uniformity required by manufacturers of metallic tungsten products and cemented tungsten carbide.

Number Of Flower : Carbon

Manufacturer of Tungsten heavy alloys parts like aircraft balancing weights, Tungsten collimator,Counterbalance for Vibration Dampening, Aircraft control surfaces, Helicopter rotor Systems,Shipballasts ,Ordinance application…etc

Our organization holds vast expertise in manufacturing and supplying Tungsten Carbide Thermal Spray Powder. The Tungsten Carbide Thermal Spray Powder has accurate chemical composition, longer shelf life, purity and high effectiveness. Post production, our team of quality controllers check the Tungsten Carbide Thermal Spray Powder so as to ensure its environment friendly nature. At JDPM we manufacture thermal spray powders used around the world by spray shops and original equipment manufacturers (OEM's). JDPM powders are used in numerous applications where temperature and corrosion protection and wear resistance are critical. Our powders are also used to repair damaged surfaces extending the life of your components. Coatings of JDPM carbide powders are recommended for use in applications, less than 482° C (900° F) , where hard, wear resistant surfaces are required WC-12Co - WC thermal spray powder with 12% cobaltWC-17Co - WC thermal spray powder with 17% cobaltWC-10Ni - WC thermal spray powder with 10% nickelWC-10Co4Cr - WC thermal spray powder with 10% cobalt and 4% chromeWC-20CrC6Ni - WC thermal spray powder with 20% chrome carbide and 6% nickel Typical properties of powder : Carbon : 3.9% Cobalt : 12% Tungsten : Balance Sieve analysis : as per the customer requirement J D POWDER METALLURGY manufactures several types of tungsten carbide based thermal spray powders. We can also develop new blends of thermal spray powders to meet customer

JDPM manufactures tungsten carbide powders ranging from 0.7 microns to 40 microns. Our micrograin carbide grades are used in circuit board drills, fine powders are used to manufacture cutting tools and inserts and our medium and coarse carbide is used to produce drilling tools, wear parts and road construction bits.  

Being furnished with a mature production line, 200~300 tons punching dies of around 800 specifications are supplied per year. Special products can be custom-made upon request.

Manufacturer of Nickel Sintered Parts like aircraft balancing inserts, rollers and other parts as per customer specifications.

Nickel powder

Form : Powder

Application : Laboratory

Various rock drilling bits are developed for different rock drilling applications. Well sold both home and abroad.

We are offering hexagonal boron nitride powder.hbn-98% density-2.1gmcc.

avartana metal  powders are produced by vacuum inert gas atomized  and cooled in argon/nitrogen inert gas. This process allows avartana metal  powdersto produce spherical, not oxidised particles with a homogeneous chemical com- position. Powder is sieved using ultrasonic sieving to obtain a precise grain distribution according to the different applications for base metals like nickel, cobalt, hard facing  /plasma transferred arc(pta) powders/additive manufacturing  powders/thermal spray powders.etc self-fluxing alloy powders are a type of thermal spraying (welding) materials which have functions of self-deoxidization and self-slag formation when melting. The nickel-chromium- boron-silicon series of self-fluxing alloy powders have been successfully used for equipment manufacture and maintenance in the metallurgical, petroleum, chemical and machinery manufacturing industries. Self-fluxing alloy powder can be applied by spraying or welding using commonly available oxygen-acetylene equipment. During thermal spraying or welding, the molten alloy forms a metallurgical bond with the substrate surface. Coatings thus formed are very dense, wear and corrosion resistant up to medium temperatures and adaptable for hard facing gears, dies, valves and other mechanical components vulnerable to wear.  1. Nominal analysis is a guideline only for standard product. Does not include all incidental elements and may differ depending on the exact specifications/standard used when ordering.2 .undiluted weld metal.pta and laser hardfacing powders are available in these standard powder particle size ranges and custom sizes upon request.wm 53–180µmwe 63–180µme 53-150µmg 38–125µmhk 63–210µmw 63–150µmdepending upon the process parameters and extent of dilution, the hardness of the weld deposit may vary from that provided in the below table.

Packaging Type : 50 Kgs in Plastic Carboys with Inner Liner

Solubility : Cool & warm water 35°C to 40°C

Compatibility : Compatible with Printing Thickener Reactive Dyes Etc.

Shelf Life : 4 to 5 Months

Purity : 99.8%

Form : Powder

Tungsten carbide grade powders are free flowing ready to press powders for use as raw materials in the production of cemented carbide tools, wear parts and other precision components. Each powder particle contains the components of the specified grade, for instance, tungsten carbide, cobalt, and alloy additions plus a wax binder. Because production of tungsten carbide tools and parts is closely linked to their starting materials, there must be a strong technical link between the powder supplier and the parts fabricator.

Mainly used in the fields of oil prospecting, road construction and engineering. With high strength, good wear resistance and long life time. Well sold both home and abroad .

Being furnished with a mature production line with advanced equipments and inspection methods, 200~300 tons drawing dies of around 3000 specifications are supplied per year. Special products can be custom-made upon request.

cobalt powder -99.3% purity ,size 200mesh ,100mesh 

Number Of Flower : Cobalt Powder

Material : Cobalt

Shape : Powder

Application : Cemented Carbide, Volve Seat, Welding Materials

Shelf Life : 1 Yrs

Purity : 99%

Chemical Composition : CO

Content : Mineral Ore Powder Making

Country of Origin : India

Form : Powder

With high impacting roughness, wear resistance and performance stability for wide range of applications. Enjoying a high reputation in the customers.

Use of finest raw material helps us in bringing forth exceptional products. Due to this very fact, we make use of only quality raw materials procured from trusted sources. Apart from presenting the quality products, we deliver the same to the customers in the set time span.

We are offering atomized nickel powder nickel is produced by melt gas atomization of nickel ingots.

Packaging Type : Tin

Packaging Size : 25 Kg

Form : Powder

Being a high-flying Supplier, we strive to deliver top-notch Alumina Powder to our esteemed patrons. The company laid its foundation stone in Bobbili(India) and caters to the market with its wide range.

AVARTANA metal powders for additive manufacturing (3D printing, rapid prototyping) are characterized by a spherical morphology and high packing density, which confer good flow properties. For powder bed processes these are essential when applying fresh powder layers to the bed to ensure uniform and consistent part build. For blown powder processes good flow ensures uniform build rates. Tight control of the particle size distribution also help ensure good flow ability. Low oxygen powders result in clean micro structures and low inclusion levels in the finished parts.   Particle size distributions Avartana metal powders for additive manufacturing (3D printing, rapid prototyping) is available in a wide range of particle size distributions that are tailored to the individual additive manufacturing systems. They can also be tailored to the particular requirements of the end application, both in terms of mechanical performance and surface finish.

Packaging Type : 50 Kgs in Plastic Carboys with Inner Liner

Solubility : Cool & warm water 35°C to 40°C

Compatibility : Compatible with Printing Thickener Reactive Dyes Etc.

Storage : Under Cool & Dry Environment

Shelf Life : 4 to 5 Months

Purity : 99.8%

Form : Powder

We offers chromium carbide powder of size 1-10microns and purity-99.93%.