Orientral Engineering Works Pvt. Ltd., Th Rampura Industrial Area, Yamunanagar, Haryana

Two stage hand pumps in conjunction with 4-way 3-position Hand Operated Directional Control Valve are required for Double Acting Jack/Ram/Cylinders. They work on a Lift-hold-Retrace Mode.

We offer Telescopic Cylinders Single Acting Load. Multi stage cylinders meant for large strokes in restricted closed heights. Also available (on request) a> double acting models b> larger no. Of stages. Hard chrome plated steel piston rod. Female half coupler & dust cap provided on all models. Please contact nearest dealer for cylinders with capacities & strokes not mentioned in the data sheets. All variations are possible on request, subject to confirmation from the dealer.

Multi stage cylinders meant for large strokes in restricted closed heights. Also available (on request) a> double acting models b> larger no. of stages. Hard chrome plated steel piston rod. Female half coupler & dust cap provided on all models. Please contact nearest dealer for cylinders with capacities & strokes not mentioned in the data sheets. All variations are possible on request, subject to confirmation from the dealer.  

We offer Hydraulic Pumps. These tiny little,horizontal type Electric Hydraulic Pumps deliver 0.2 litre at max.operating pressure of 700kgfcm2.Its so compact and lightweight, you can carry them anywhere by shoulder belts on the pumps. Two stage, fully remote operated and weighting just 6 kgs, the UP-35RH series pumps are ideal for the use with small single-acting cylinders and or handheld hydraulic tools. Noise reduction by internal air muffler. Pumps with ONOFF remote control hand switches with 2M cards.

We offer Stud Tensioners Bolt Stretching Devices. Stud Tensioners are used to pre-load the studs with equal tension prior to tightening the nuts as well as to facilitate easy unscrewing of the nuts.

Stud Tensioners are used to pre-load the studs with equal tension prior to tightening the nuts as well as to facilitate easy unscrewing of the nuts.

We offer Single & Two Stage Hand Pumps For Single Acting Cylinder. Hand Pumps are compact, light weight and portable. The Pressure Relief Valve is pre-set at full working load. Two-Speed Pumps have an automatic change over from LP to HP. Single Speed Pumps are used for JackRam Cylinder where the stroke volume required is low. Two-Speed Hand Pumps are recommended for applications where the stroke volume required is large i.e. For larger JackR amCylinder or multiple CylinderJack hookups. It facilitates rapid approach and hence reduces cycle time

We offer Single Acting Light Weight Aluminium Cylinders Spring. Steel base plate and grooved saddle for larger durability. Hard coated piston rods and cylinder bore to increase cylinder life. Composite wear rings to prevent metal to metal contact. Gland nuts provided for protection against over travel of plunger. Female half coupler & dust cap provided on all models. Please contact nearest dealer for cylinders with capacities & strokes not mentioned in the data sheets. All variations are possible on request, subject to confirmation from the dealer. Double Acting Hollow Ram version also available.

Heavy duty general purpose versatile Jack / Ram / Cylinder with screwed ram and lock nut to provide position load holding for extended period of time. The springs are not designed to retrace the piston rod in horizontal position or with any external load. Hard chrome plated steel piston rod. Stop ring provided on all models. Female half coupler & dust cap provided on all models. Please contact nearest dealer for cylinders with capacities & strokes not mentioned in the data sheets. All variations are possible on request, subject to confirmation from the dealer.  

We offer Quick Connect Couplers. Quick Connect or Couplers are used to conncet & disconnect Hoses Pumps Cylinder quickly by hand. Dust Cap provided.

For easy mounting of a pressure gauge onto the system. Male end screws into pump or cylinder port,female end accepts hose or coupler, 3rd port is for gauge connection.

Pressure gauge is always recommended to safeguard against overloading of the hydraulic system. 2 Calibrated to read in kg/cm and psi. Fast and easy installation. Pressure gauges calibrated to read directly in tonnes can be provided on request.

  Extra low closed height. Over stroke prevention through over flow port. All XGP-Series cylinders include integral tilt saddle -maximum tilt angle upto 5°. Stop ring provided on all models. For models above 200 tonne capacity, additional over flow port provided. Female half Coupler & dust cap provided on all models. Please contact nearest dealer for cylinders with capacities & strokes not mentioned in the data sheets. All variations are possible on request, subject to confirmation from the dealer.

Flat Jacks incorporate the optimum stroke in the minimum closed height to give lifting force in confined places of work. Strokes being very limited and the area of working being almost inaccessible, mounting bolt holes are provided for positive fixturing. Hard chrome plated steel piston rod. Stop ring provided on all models. Female half coupler & dust cap provided on all models. Please contact nearest dealer for cylinders with capacities & strokes not mentioned in the data sheets. All variations are possible on request, subject to confirmation from the dealer.  

Heavy duty Jack/Ram/Cylinder for higher loads where retracing need not be spring assisted. Light weight, low profile design for use in confined spaces. Hard chrome plated steel piston rod. Female half coupler & dust cap provided on all models. Stop ring provided on all models. Please contact nearest dealer for cylinders with capacities & strokes not mentioned in the data sheets. All variations are possible on request, subject to confirmation from the dealer.  

Capacity : 10 TONNE 90 TONNE

Lowest closed height for use in confined spaces. Over flow port functions as a stroke limiter. Female half coupler & dust cap provided on all models. Swivel saddle with 3°-5° swivel angel available on request. Please contact nearest dealer for cylinders with capacities & strokes not mentioned in the data sheets. All variations are possible on request, subject to confirmation from the dealer.  

    Little Wonder Electric Powered Hydraulic Pumps   The lightweight electric powered Hydraulic Pumps UP- 45SV have a special 2 stage Plunger Pump, providing high flow of 2.5 LPM at 1st stage upto 70 Bar and 0.35 LPM upto 700 Bar. The pumps are designed to easily accept various kinds of stacking valves such as Solenoid Valves, Relief Valves, Check Valves etc. for almost any application. Solenoid Valved Pumps combine maximum productivity and energy saving with ease of use and are an ideal choice for production, lifting and maintenance applications. Lightweight and portable – 16 to 20 Kgs., with easy carry handles.  

Super Light Electric/Hydraulic Pumps UP-35RH Series   These tiny little,horizontal type Electric Hydraulic Pumps deliver 0.2 litre at max.operating pressure of 700kgf/cm2.Its so compact and lightweight, you can carry them anywhere by shoulder belts on the pumps. Two stage, fully remote operated and weighting just 6 kgs, the UP-35RH series pumps are ideal for the use with small single-acting cylinders and/ or handheld hydraulic tools. Noise reduction by internal air muffler. pumps with ON/OFF remote control hand switches with 2M cards.

Hydraulic Tyre Remover is quick in action and reduces the effort tremendously for unseating of tyre beads on earth movers having tyre dia. 25′ (625 mm) to 49″ (1245mm). This tool is of 10 tonne capacity, light in weight and equipped with 2 metre long hose and power source (i.e. Hand Pump/Air Operated Pump).

Spreaders are used for lifting / shifting / splitting. These are used where the access available is very narrow. Do not exceed rated capacity and spread. XB015200 for long stroke spreading applications. XB008090 used in very confined work areas. Female half coupler & dust cap provided on all models.

Capacity : 800 to 1500 Kg

we are offering Hydraulic Pullers.

Maximum pump volumetric efficiency. Maximum internal heat transfer. Prevents pump cavitation. Additives prevent rust, oxidation and sludge. High viscosity index. Maximum film protective lubricity. The 20 litre can has a screwed re-useable top pullout funnel with inbuilt filter. Easy pouring. The pullout funnel can be pushed back for safe closing during storage.

Hydraulic Nut Splitters are designed to solve your problem of opening rusted / jammed nuts.These Nut Splitters are provided with high tensile cutting heads. They are lightweight and easy in operation. Angled head design. Single acting,spring return cylinder. Applications include service trucks,piping industries,tank cleaning pterochemical,steel construction,and mining etc. Female half coupler & dust cap provided on all models.