Press Brakes Dealers in Rajkot (77 products available)

• DIMENSION MM (LXWHX): 1400 x 1050 x 1900
• SPEED: 35-9-60

Ram travel repeatable within ±0.03mm for consistent bends for interchangeable output. Ram travels is referenced from bed to avoid side frame deflections affecting stroke accuracy.   Rugged structure from ultra tested Is 2062plates, rigidity conforming to international standards. Hydraulic, electricals of internationally reputed brands for consistent performance and reliable operation. Front operated manually back gauge front sheet supports with scale Most hydraulic parts rated for 310 bar but working pressure only 160 bar for long life, reliable operation. Ram guides of 4-piece design with replaceable liners. Pivots with permanently lubricated bearings or hardened parts lubricated by central hand pump Cylinders of ultra-tested seamless honed tubes, hard chrome-plated pistons, dual seals )Telfon ring plus set of chevron packings) for extra reliability. 3-speed bending cycles for faster output yet slow smooth bending with minimal shock loads. Movable control station with majority controls, emergency stop, up-down foot-switch controls, Inch cycle mode for set-up and one-off jobs. Single cycle modes for repeat cycles, production runs.   Main cylinders seals can be easily replaced without requiring crane of dismantling the ram. Hydraulic powder gives silent working, better safety against overload, instant stoppage-reversal of ram One set of unhanded standard punch, multi-V die Block Lifting chains system and rotation of die block when using multi-vee die block.

• Brand Name: Rajshakti
• Raw Material: Hydraulic Press Brakes
• Driven Type: Hydraulic
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Type: Hydraulic Press Brakes
• Warranty: 1year
• Country of Origin: India

We are listed at the apex in the list of the well-reputed Hydraulic Power Press Brake Exporters from India. Customers from various regions of the world are placing bulk orders for the Hydraulic Press Brake due to the unmatched quality and unsurpassable performance. The total capacity of the Industrial Hydraulic Press Brake offered by us ranges from 20 to 400 Ton. Structure Hydraulic Press Brake consists of 2 cylinders mounted at back side of press brake for synchronizing parallelism between ram & table, using the mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload welding edges are properly machined for weld joints. The electric control panel is fixed on side wall at convenient place for easy reach of operator. It Includes push button pendant and foot switch. Standard "V" block & "V" Punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic Components are of reputed make like Videkers, Rexroth, Dowty, Yiken Polyhydron etc. Standard Accessories Electric Motor, Control Panel with selection of INCH -ONCE-AUTO Mode of operation. foot switch fine stroke Adjustment rod with limit Switches, Manual Lubrication, Instruction Manual. Optional Accessories Goose NECK Punch & Other tooling (Drawing required). Electronic Stroke Counter, NC Operated Back Gauge, Automatic Lubrication System. Capacity : 20 To 400 Ton Click here for Technical Specifications

We provide steel structured Hydraulic Press Brake that has no alternative available in the market when it comes to longer service life and precise fabrication. The Hydraulic Press Brake that we deal in is used in varied applications and therefore is demanded by the clients all across the globe. Composition : Pair of hydraulic cylinders Heavy duty torque tube Imported sealing kitSide framesOil reservoir for adequate coolingPair of levers (steel plates)RamI-beam type tableLevers Features : Repetitive accuracy : ± 0.04 mmTrouble free operationLow noise systemNon metallic liners for longer service lifeHydraulic valves : 310 bar Working pressure : less than 160bar Adjustable five piece guidesFast return speedFront operated back gaugeRaw tilting for bending accuracyEasily adjusted stroke lengthsMicro setting arrangementRear cylinder designMovable work stationOn / off buttonsSelector switches foe inchSingle cycle & auto cycleEmergency stop buttons Operations : Three operational modesFoot switches-for controlling ram movementSelection of mode -panel door mounted on selector switchInch cycle for setting bed angle depth strokeAuto cycles- for repetitive work and adjustments Standard Accessories : Main Drive MotorElectric Control Panel with selection of Auto,'INCH' & Single Cycle Auto mode operationMovable work station with foot switchPair of lifting linksPair of Sheet supportManual back gaugeOne set suitable five way Die & PunchCentralized lubrication system Optional Accessories : N.C. Operated Stroke controlN.C. Operated back gauge & stroke controlSliding sheet support with swing away stoppersHardened tools & special toolings Anti-deflection unitHydraulic tool clampingMotorized back gauge with DROHigher throat depthAnti deflection unitMultiple depth setting arrangementFirst fill of hydraulic oil

• Automatic Grade: Semi-Automatic
• Power: 5.5 Kw
• Weight: 2750 Kg
• Brand Name: Shailesh
• Capacity: 40 Ton
• Model: 40T/2200
• Worktable Length: 2200 mm
• Pulse Distance: 1850 mm
• Throat Depth: 230 mm
• Stroke: 100 mm
• Max Open: 320 mm
• Dimension: 2200x1200x1910 mm (LxWxH)

• Certification: CE Certified
• Weight: 100-1000kg
• Automatic Grade: Automatic
• Rated Power: 1-3kw
• Driven Type: Hydraulic
• Warranty: 1year
• Max Stroke: 150 mm

SIDDHAPURA Hydraulic Press Brakes are designed and developed through years of experience in sheet metal working machineries. SIDDHAPURA Hydraulic Press Brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of Press Brake and are synchronized for parallesm between ram & table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for best weld joints. The electric control panel is fixed on side wall at conventional place for easy reach of operator. It includes push button pendant and foot switch. Standard "V" Block & "V" Punch and manually operated back gauge system which is front operated are supplied as a standard accessories. Hydraulic components are of reputed make like Videkers, Rexroth, Dowty, Yiken, Polyhedron etc. Mitsubishi Controller & Drives The Controller with monochrome touch screen Manual, Auto, Program mode selection, Stroke Counter through Touch Screen It memorizes 120 (15 Programs and each Program 8 Bends.) Stroke Positions It stores stroke length, height of each bend It allows skipping a step in program if the bend will not required on the job The controller can be connected directly to computer by serial links The controller, Drive and Screen can be offered with customized High efficient Optical Linear Glass Tube Scale for perfect position of Y Axis. Repetitive accuracy with + or 0.05mm Program menus are protected by password Standard Feature Mitsubishi controller with monochrome touch screen. Swivel mounted. Hardened & ground ball screw and shaft, liner motion bearing on guide rods AC servo motor for back gauge (�x� axis) drive High efficient optical liner glass tube scale for �Y� axis Movable work station with a pair of foot switch A pair of lifting links & sheet support. One suitable five way die & punch of EN- 8 or EN 9 Centralized lubrication system with hand pump Ram lifting arrangement Bending chart Options Multi axis back gauge High speed MPI (Multi Port Interface) link for operation via PC. Anti deflection unit (Manual/Motorized/ Automatic) Hardened & ground tools and special tooling Sliding sheet support with swing away stoppers for front gauging Hydraulic tool clamping Photo electric finger safety guards Ginger guard for back gauge Automatic lubrication system Extra depth of throat Higher speed versions First Fill of hydraulic oil Timing belt drive

• Type: Mechanical Press Brakes
• Certification: CE Certified
• Application: Bending Plate
• Weight: 4000-5000kg
• Color: Blue
• Voltage: 6-9kw
• Condition: New
• Automatic Grade: Automatic
• Power: 440V
• Driven Type: Mechanical
• Warranty: 1year
• Country of Origin: India
• Brand Name: Tirupati
• Raw Material: Mild steel
• Automatic Grade: Yes
• Machine Type: Mechanical
• After-Sales Service Provided: Two years
• 4 mm banding: White colour

• Range: 80T to 600T in Length 2000mm to 6000mm version NC & CNC

One of most important sheet metal forming machinery mainly used to bend sheet plate in different angles. Products like bus & truck body building, electric panel, solar panel, door & window frame and many more.

• Brand Name: RAJESH GLOBAL
• Driven Type: Hydraulic
• Color: Creamy, White
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power: 440V
• Application: Bending Plate, Bending Sheet
• Certification: CE Certified, ISO 9001:2008
• Voltage: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Type: CNC Press Brake
• Weight: 3000-4000kg, 4000-5000kg
• Warranty: 1year
• Country of Origin: India

We are offering hydraulic press brake. Press brake machine capacity 80 ton bending capacity. (length x thick 2540 x 4 mm dist. Between housing 1700 stroke length 75 stroke per minute 30 ram adjustment 75 shut height ram stroke down 220 table height 800 depth of throat 300 main moter hp 10 ram adjustment moter hp 1.5 die-space (length x width) 2540 x 200 machine diamensions (l x w x h) 2900 x 1500 x 2850 approx weight kg 5500

Mechanical Press Brake, 2030×2mm Bending MS Sheet, 

We are offering mechanical / pneumatic press brake. Jsmt press brakes are designed and developed through years of experience in sheet metal working machines jsmt press brakes are widely accepted in industries for continuous production runs and in areas requiring accuracy and repeatability coupled with high production. Frame: frame is of robust steel construction of rigid and interlocked design. It is strain-free and supports the ram and bed against undesired deflection under permissible load condition.

• Weight: 4000-5000kg
• Voltage: 9-12kw
• Condition: New
• Automatic Grade: Semi Automatic
• Driven Type: Electric

RG Plus+ – HD   Industrial control Cybelec DNC 60 Yl, Y2 independent hydraulic cylinders, proportional valve technology Extra welded-steel side frames Strong and stable construction Efficient, low-noise and accurate hydraulic system BOSCH REXROTH Beam movement on two double roller bearings on each side Single-axis back gauge system X

• Brand Name: Priyal
• Color: Blue
• Condition: New
• Certification: ISO 9001:2008 Certified
• Capacity: 50-100kg/h
• Working Pressure: Hydraulic
• Type: Hydraulic Power Press
• Warranty: 1 Year
• Material: Set metal
• Finishing: Unpolished
• Shape: Rectangular
• Power: 3-6kw
• Pressure: Medium Pressure, High Pressure
• Usage: Sheet Bending
• Width: 70mm
• Packaging Type: Carton Box
• Overall Length: 55mm
• Specialities: Long Life
• Dimension (LxWxH): 375x290x275mm
• Machine Weight: 2000-3000kg
• Phase: Three Phase

• Country of Origin: India
• Type: Hydraulic Press Brakes
• Application: For Pressing Metal Sheets
• Weight: 1800-10000
• Color: gey & Blue
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Raw Material: Hydraulic Press Brakes
• Rated Power: 2-15kw
• Driven Type: Hydraulic
• Warranty: 1year
• Brand Name: JCP

Our Heavy Duty Hand Press Brake Machines are made from M.S. Material and Mainly useful for any kind of Steel Furniture Industries. It is useful for Half Round and Right Angel Bending. Side Walls: Made from mild steel plate. Vertical and Horizontal supports are provided for more strength. Screws: Made from mild steel with square thick threads. Upper Beam: Made from Heavy Steel Plate. All surfaces are well surfaced to get accuracy. V-Block:Provided with 5 grooves for various sizes of job. Knife: Made from mild steel and sharpened up to 20o after sufficient machining.

rt power press brakes are designed and developed through years of experience in sheet metal working machines. rt power press brakes are widely accepted in industries for continuous production runs, and in areas requiring accuracy and repeatability coupled with high production. standard features:   foot pedal and die block lifting link. fly wheel & gear guard. self lubrication system. motor pully. stroke counter. standard “v” block and punch. motor mounting bracket.   options:   motorised back guage. automatic lubrication system ee-belts. electric motor & starter / control panal board. squaring guage system. various type of die & punch. foundation bolts. all dimensions are in mm. power supply 400/440 volts, 3 phase, 50 cycle. as day to day improvements are contemplated for better performance of the machine. We reserve the rights to alter the specifications without prior notice. all the machines undergo a through check-up by our expert engineers before dispatch to ensure their smooth and trouble free operation.

• Automation Grade: Semi-Automatic
• Motor Power: 3-30 kW
• Throat Depth: 200-800 mm
• Length Of Table: 2500-8000 mm
• Slide Stroke: 100-300 mm
• Layout: Horizontal

We are offering pneumatic press brake. Weldor press brakes are designed and developed through years of experience in sheet metal working machines. Weldor press brakes are widely accepted in industries for continuous production runs and in areas requiring accuracy and repeatability coupled with high production. 1. Frame: frame is of robust steel construction of rigid and interlocked design. It is stain-free and supports the ram and bed against undesired deflection under permissible load condition. 2. Ram and bed: made from steel plates of suitable thickness. Machined for straightness and parallelism of the working surface. Ram is guided and supported throughout the stroke by accurately machined guideways. 3. Drive system: power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsional stresses on the eccentric shaft. The gear and pinion are made out of carbonalloy steel. 4. Ram adjustment: motorized ram adjustment through a simple drive mechanism, facilitates quick bending angle adjustment. Angular ram adjustment is made simple by incorporating a spring loaded dog clutch. 5. Clutch and brake: all series of press brakes are provided with high-torque low-inertia friction clutch, synchronized with heavy duty mechanical brake ensuring immediate braking of ram on releasing the pedal. Clutch operating levers are designed in such a way that minimum, engaging force is required at the pedal.

We offer hydraulic press brake. Weldor hydraulic press brakes are designed and developed through years of experience in sheet metal working machineries. Weldor hydraulic press brakes are developed by keeping latest technology in mind. Both cylinders are mounted at back side of press brake and are synchronised for parallelism between ram and table, by providing mechanical links connected with cylinder. The heavy duty steel construction frame is so designed to absorb heavy shocks of overload. All welding edges are properly machined for weld joints. The electric control panel is fixed on side wall at convenient place for easy reach of operator. It includes push button pendant and foot switch. Standard v' block & v' punch and manually operated back gauge system which is front operated are supplied as standard accessories. Hydraulic components are of reputed make like vickers, rexroth, dowty, yuken, polyhydron etc.

• Brand Name: MAX POWER
• Country of Origin: Made in India
• Usage/Application: Sheet Bending
• Size: 1500 MM TO 3000 MM
• Cutting Load: >150 ton
• Automation Grade: Semi-Automatic
• Max Sheet Width: 3 meter
• Material: MS

 STANDARD ACCESSORIES   Motor PulleyFly wheel & Gear GuardOil cups for lubrication pointFoot Paddle Front GaugeBack Gauge ( manual operated )Handle for back gaugeFinger Hold Down Guard   OPTIONAL ACCESSORIES Lubrication pump manualLubrication pump automatic Electrical & AccessoriesStroke Counter Tie RodMotorize Back Gauge Hydraulic Hold DawnPneumatic Clutch  

• Brand Name: KAWA
• Rated Power: Hydraulic
• Machine Type: Press Brake
• Certification: ISO 9001 2000
• Automatic Grade: Automatic
• Place of Origin: Gujarat, India
• Material / Metal Processed: Aluminum

PRESS BRAKES :   These machines are useful for sheet metal fabrication for bending, pressing, punching, notching and in forming of sheets in different shapes. MECHANICAL SERIES Capacity: 25 tones to 160 Tones. Bending capacity: 1270 to 3150 length Thickness of bending: 1.6mm to 10.0mm(ms) Machines are manufactured as per IMTMA standards. Crank shafts from EN-8/9 materials. Friction clutch with superior quality fibre plates Rigid heavy adjustable brakes. Motorised Ram adjustment. All gunmetal bushes from 85:5:5 and where ever required bronz bushes. Balance loadwheel Electric penne box with L & T or Simens make components. Hand / Auto lubricating systems. Standard die block and punches from alloy steel. Complete tooling solutions as per Clients requirments.

We are engaged in manufacturing high quality hydraulic press brake to Technically advanced features of our hydraulic press brake make it extremely popular in the global market. The hydraulic press brake. available with us, have welded steel frame made up of IS 262 plates that is ultrasonically tested.

• Driven Type: Hydraulic
• Capacity: 50 ton to 300 ton
• Working Length: 2030 mm to 4500 mm

Hyd Press Brake is a machine tools which works on variation of the pressure of the Brakes

Power Supply : 400 / 440 volts, 3 phasa, 50 cycles, In Span of 12 Years improvement are contemplated for better performance of machine, Also we reserve the rights to alter the specifications without prior notice. all dimensions are in mm.  

Our Hand Operated Press Brakes is synonymous with performance and quality. This product is constructed with the help the finest ram designs. Easy to operate, energy efficient and requiring low maintenance, these Press Brakes are total value -for- money products 

E Series Models are designed to be flexible and reliable offering more standard features than other brands in their price class,extra value is achieved by addition of CNC Crowning System withthreebeam Design,Extra backgaugedepth,extra heavysteelframeandweightofmachineanglecorrection date base,touchscreencolourDisplay with highstepandbendmemory,Toollibrary.   E SeriesCNC Pressbrake models arebasedonY1-Y2CylindersSynchronised for parallelism of,ram and throughelectronic controller.Steelframe is rigidlywelded monoblock andconstrutionis designed to absorb under load.Steelframeis machinedon8metre lenght floor floor boring havingdro.Machiningis done in sucha wayinreferenceto both cylnder plateand tablein90 degree at cylinder,slide tableandfacing.drilling work in onesetup,whice bensured long time cylinder lifeandd machine accuracy. Cylinders are madeorf highqualityforgedsteelprecisely machinedinerne.VMC,and honned.Ram travelthrough rollimg bearingwitheccentric settingtominimize slide playout to achieve smooth traveland tobeam tilt.Fully Electronicsymnchronsation withclose loopservo valve.Technology ofbosehrexrothandhoreibigor (bothGermany) Assures continuous at correctio of Y1-Y2 Parallism though CNC Control.Y1-Y2 measurement feedback and stroke depth measurement though improted electronic linear scles up to 5 micron resoution.Onesidebendingis possiblewithoutanydamagetoroller bearingguidingsystem.CNC 5ervohydraulic criwningsystemwiththreelower beam design having twoor moreHydrulic Cylinders.CNCxaxis backgaugetravelon two ballscrewand Linear motion gudeway inaluminiumextrusionsectionframe.CNC X AxisBackgauge Driven byA.C. Servomotor (Importedmake) withencoder withloseloopcontrol.