A.T.E. Enterprises Private Limited Sarkhej, Ahmedabad, Gujarat

  Key Features  Microcomputer based pre-selectable / pre-programmable solid-state circuitry control Works under the principle of single and triple untwist-retwist method and direct-counting method Determine yarn twist in single, plied, or OE yarn

Conditions yarn in cop, cone, or hank forms in batch capacities of 500, 750, 1000, 1250, and 1500 kg Separate, maintenance-free, clean conditioning chamber without water bath or heaters Body made of corrosion resistant, high quality stainless steel Low temperature yarn conditioning from 46 degrees Celsius and heat setting up to 120 degrees Celsius External mineral wool insulation provides energy savings

  Key Features  Variable winding speed option for fine to course count of yarn Yarn wrapped on the board can be 20, 22,26,32,38 and 48 ends per inch Specially designed yarn bobbin stand for precise sampling Model available upto accommodate 30 inches board

  Key Features  Sensing module with electronics Control panel and digital indicator (optional) Allows online measurement of fabric width Available in stand-alone and modular versions

  Technical Details  Applications: drafting system suitable for speed frames and ring frames of any make - for cotton,man-made fibres,wool, and blends   Key Features  Single piece ergonomic lifting knob Maintenance-free Choice of load selection on each top roller Reliable loading through proven helical coil springs Easy to remove and mount rollers Consistent results over years of use   Variants for cotton ring frame  PK 2025-1251331 (suitable for short cradle) PK 2035-1251784 (suitable for medium and long cradle)   Variants for worsted ring frame  PK 1601-01 (with Zinc plating) PK 1601-01 NC (with Ni-Cr plating)   Variants for roving frame  PK 1500-0962604 (Zinc plated, 3-roller drafting) PK 1500-0962604 NC (Ni-Cr plated, 3-roller drafting) PK 1500-0962604 NK (Ni-Cr plated, 3-roller drafting with new knob) PK 1500-0962602 (Zinc plated, 3-roller drafting) PK 1500-0962602 NC (Ni-Cr plated, 3-roller drafting) PK 1500-0962602 NK (Ni-Cr plated, 3-roller drafting with new knob) PK 1500-0001938 (Zinc plated, 4-roller drafting) PK 1500-0001938 NC (Ni-Cr plated, 4-roller drafting) PK 1500-0001938 NK (Ni-Cr plated, 4-roller drafting with new knob) PK 1500-0001940 (Zinc plated, 4-roller drafting) PK 1500-0001940 NC (Ni-Cr plated, 4-roller drafting) PK 1500-0001940 NK (Ni-Cr plated, 4-roller drafting with new knob) PK 1600-40 (Zinc plated, 4-roller drafting) PK 1600-40 NC (Ni-Cr plated, 4-roller drafting)

  Technical Details  Application range: flex banner, awnings, canopies, truck covers, plaster reinforcement, and protective textiles   Key Features  Robust, high-speed machine Precise weft insertion system

  Technical Details  Application range: for drylaid webs of natural and man-made fibres   Key Features  Independent drives Height adjustable feed table Liftable top rolls All rolls with metallic wires Non-driven roller between trio's

Real time data collection Production monitoring Production scheduling Ticket printing Interface with ERP system Yarn inventory management Traceability Events and alerts

  Technical Details  Pressure range: 0-25 bar Size range: 0-240 m Material of construction:pump base - CI (TFV)/AISI 304(TFVI)/AISI 316(TFVL); impeller - AISI 304 (TFV, TFVI)/316 (TFVL); pump body - AISI 304 (TFV, TFVI)/316 (TFVL); suction manifold - AISI 304/AISI 316; discharge manifold - AISI 304/AISI 316; isolation valve - AISI 304/AISI 316; NRV valve - AISI 304/AISI 316 Flow range: 0-900 m3/hr   Applications  Commercial complexes Large residential buildings Skyscrapers Malls and multiplexes   Key Features  Variable Frequency Drives (VFDs) ensure maximum power saving and minimum wear and tear of pumps No need of a standby pump since all pumps on soft start BMS compatibility/remote communication possibility Robust systems

  Technical Details  Material of construction: pump casing - CI; impeller - AISI 304/AISI 316; shaft - AISI 304 Pressure range: 0-10 bar Head range: 0- 60 m Flow range: 0-130 m3/hr Range: 3D,3DS,3DP Size range: 32-40-50-65   Applications  Water and clean liquids transfer Water supply Pressure boosting Washing and industrial plants Water circulation in air conditioning systems Irrigation and agriculture   Key Features  Highly resistant construction Impeller constructed of stainless steel

  Technical Details  Raw material: cotton, blends, synthetics   Key Features  Separated waste material can be fed to presses or recycling machines Rotating drum ensures optimal separation of fibres and dust

warp knitting machines for rigid yarns have perfectly-coordinated creel systems, feeding aggregates, and brake synchronisation that help increase profits. Featuring rapid change-over to different yarn parameters as well as being easy to operate, KARL MAYER's warping machines for rigid yarn grants high efficiency and productivity Key Features  High performance tensioners High performance main motors

elastane warping machines have a vertical arrangement of the packages hat allows warping finest yarns with gentle yarn treatment. The free yarn run guarantees an easy operation along with highest efficiency. Computer control provides continuous compensation of differences among the yarn packages. The result is a warp beam featuring uniform yarn tensions throughout the yarns as well as identical warp-beam circumferences. In case of a machine stop from top speed to zero, highly-intelligent brake synchronisation systems guarantee a reliable yarn sheet control, while opto-electronic control by camera stops the machine in case of yarn breakage   Key Features  High performance tensioners High performance main motors

Number of winding heads: 25-30-35-40-45. With automatic doffing Uses: bulking of acrylic yarn, HB and blends also with elastomers, wool, and blend-set yarn. Heat-setting Workable counts: Nm 5-50 (referring to feeding yarn) Winding speed: 500-1000 m/min with continuous variation Heat chamber temperature: up to 165°C with continuous variation. Steam, electric or both heating Heat chamber and yarn distributor, selected for set and/or shrunk yarn up to 300f shrinking Waxing by deflection Tensioner device for deflection with cleaning air jet   Technical details  Number of winding heads: 25-30-35-40-45. With automatic doffing Uses: bulking of acrylic yarn, HB and blends also with elastomers, wool, and blend-set yarn. Heat-setting

The purchase decisions of the modern-day FMCG consumer is dependant largely on the print quality of the packaging material. Uneven colour shades on the printed substrate is a commonly occurring phenomenon, resulting in low quality printed material - which might influence a buyer negatively. Ink viscosity plays a vital role in ensuring uniform colour shades across the printing substrate. Consistent printing and optimum use of ink and solvents can be realised only with stable viscosity.

The vertical shearing machine DP 7 V is designed with two superimposed shearing units; this layout allows a considerable saving of space, without jeopardizing the simplicity of operation of the machine. It is available in two main versions: Shearing twice the same face in one passage and shearing once, both faces in one passage. The heart of the machine, the shearing unit, is the already well tested DP 7 single unit shearing machine. This shearing unit has a particular pitch of the ledger blade in comparison with the shearing rollers and a special anti-vibration and balancing system. The drive of the various axles is through AC motors with power supply inverters. The control of the machine is through PLC with touch screen. The machine can be supplied complete with all the accessories needed for specific fabric processing Two superimposed shearing units Beater roller and pile lifting unit Metal detector Automatic seams jump Automatic thickness control Seams detector with magnetic induction Special cutting stand with piano devise for selvedge protection Fabric centering unit with photocells Brush at exit Spare shearing unit Automatic lubrication Dust suction and recovery plant

Technical Details  Pressure range: 0-25 bar Head range: 0-160 m Flow range: 0- 65 m3/hr Range: EVM-EVMG-EVML Size range: 3-5-10-18-32-64 Material of construction: pump casing - AISI 304 (EVM)/AISI 316 (EVML); impeller - AISI 304 (EVM)/AISI 316 (EVML); shaft - AISI 316   Applications  Suitable for civil, industrial, fire-fighting Primary water treatment plants Reverse osmosis, seepage, etc. Moving moderately aggressive fluids Boiler loading Washing Heating systems and air-conditioning Pressure boosting systems   Key Features  The EVM pumps can be coupled with standard IEC motors Built-in thrust bearing The splined shaft features high mechanical strength Thick stamped stainless steel Bearings made of tungsten carbide Liner-rings are "floating" and easily replaceable

Sturdy, self-supported and maintenance-free modular design of the structure makes it easy to install and operate. With the option of 2-4 drying cylinders, utility piping and drive arrangement for each cylinder, the drying range can be customized as per the requirement. Crease free fabric run with minimum fabric tension and uniform temperatureacross the width. It has a user-friendly operation and control mechanism   Modular factory fitted 2/4 drying cylinders, strong structure, quicker installation  

Key Features  Auto-draining for centrifugal pump Tailored impeller for impeccable flow and agitation Quick demount (QD) feature to enable quick changeover

  Technical Details  Material of construction: venturi chamber housing - C.I GG 20; motor housing - C.I GG 25; impeller - C.I GG 25; pump casing - C.I GG 25; diffuser pipe - SS 304; impeller - SS329 (optional) Head range: 0-16 m Range: 100C CB1 to 200G CB1 Size range: 1.3-18.5 kW Flow range: 50-500 m3/hr   Applications  Aeration and mixing of wastewater in small and medium sized tanks Cleaning of storm water tanks Balancing tanks   Key Features  Standalone, self-aspirating system, with the option of fixed installation with guide rail and pedestal, or portable installation with stand Blockage-free hydraulic design with Contrablock impeller Maximum allowable temperature of the medium for continuous operation is 40°C

  Key Features  Only few selected parts of the drafting system need to be replaced Fixing of the new drafting components is simple and easy No problem in working and maintenance due to combination of old drafting components with some new drafting components Very short installation time   Variants  Spindle: Spindle with customised design and suitable insert (HF-100/HF-1/HF-21) can replace the existing spindle depending on the requirement PK1500 3/3 and 4/4 drafting system for speed frame PK2025/PK2035 drafting system for ring frame

  Technical Details  Production: 1000-1400 kg/hr Power consumption: 3.5 - 4.5 kW Raw material: cotton   Key Features  Pressure sensing 6/10 chambers

Easy and simple to use operating software Wireless communication in station terminal allows free adjustment and control as well as convenience in operation while standing or seated Separate screens to display production, efficiency, and important parameters One the screen at the terminal point of the system, technical data such as IE analysis, target management, and product details can be seen Intelligent analysis of hanger flow rate to each station reduces bottlenecks Accessory dispatch management function in loading station Intelligent transporting ​system helps eliminate unnecessary material handling between assembly line and finishing line​ The system can adjust chain heights according to different products like garment or home textile. This helps to set the production line according to the order received Each station has a large storage of hangers which allows the production line to handle increases in production Collective packaging both batch-wise and colour-wise, on the same machine Can be enlarged and widened according to the need. For e.g. handling of wide cut pieces of quilts so that there is no interference while entering/exiting each station Can be customised for home textiles

Top bearingsare lubricated for life with special dustproof protection Bigger whorl diameter, for B & C spindles types To reduce the belt load on the spindle bearings; this system guarantees twist evenness Stainless steel plate and compensating pulley in aluminum with a ceramic coating, with optimised shape that guarantees less power absorption and maximum feeding content Yarn tensioning with interchangeable spring pistons for different counts and materials Tension can be adjusted with 6 different positions High flexibility thanks to quick transformation from free to controlled balloon 200 and 250 mm gauge with maximum 340 spindles in 200 mm Tangential belt drive with Dual Headstock (optional)