Air Pumps Dealers in Ahmedabad

DEPA® Air Operated Diaphragm Pumps were developed for the smooth transfer of abrasive, solids-containing and viscous media. The direct pneumatic drive means that no electric driven motors, base plates and couplings are needed. The compact and efficient designs are easy to transport, making them flexible enough to use on construction sites, in the mining industry, as well as in stationary operation in different industries. Bodies made of cast aluminum AL 233, ductile iron GGG 40 and cast stainless steel 316L are available so that the pumps can be individually adapted to transfer tasks. The materials for diaphragms, valve seats and valve balls have to be selected from the compatibility list. The units are manufactured in five different sizes (types), with the connections DN 15 - DN 80, which is equivalent to R ½" - R 3". All pumps are delivered ready for operation and only have to be connected to the main air supply system.

Air-cooled canned motor pumps designed for high-temperature applications isolate liquid in the motor section of the unit for the hot process fluid in the pump casing with a series of pressure ports located in the front bearing housing or pump casing adapter. This isolated liquid (usually the same fluid as the pumped fluid) is circulated through an air-cooled heat exchanger by an auxiliary impeller located on the rotor assembly.

Owing to the dedication of our diligent professionals, we have earned a reputed name in manufacturing, exporting and supplying the superior quality assortment of AODD Pumps. Our offered pumps are broadly used for lifting fluids. These pumps are manufactured by our experienced professionals by utilizing quality approved components and advanced technology in sync with set international quality standards. Moreover, these pumps are available in the global market in different specifications and at economical prices. Features: • Easy to install • Excellent performance • Can withstand wide voltage fluctuations Specifications: • 1 ½ ” BSP (40 mm) PP / PVDF • Max Flow Rate: 270 LPM (72 GPM) Port Size: • Inlet: 38.10 (1 ½ ” BSP) • Discharge: 38.10 (1 ½ ” BSP) • Air Inlet: 9.64 mm (3/8” BSP) • Air Exhaust: 12.70 mm (½” BSP) Suction Lift: • Dry: 4.57 mm ( 15’) • Wet: 7.62 mm (25’) Teflon: • Dry: 3.05 mm (10’) • Wet: 6.09 mm (20’) • Max Particle Size (Dia.): 4.76 mm (0.188”) We are manufacturer of AODD Pumps in Ahmedabad, Gujarat,

  Technical Details  Size range: 200 l drum Flow range: 174-603 ml/cycle Output pressure: 35 Mpa Pressure range: 0.2-0.7 Mpa   Applications  Transfer of heavy duty grease (NLGI 0 to NLGI2)   Key Features  Unique follower and inductor plates eliminate foreign contamination and ensure complete emptying of drum Combined with air operated lift, makes container changeovers simple, safe, and fast Can safely transport flammable liquids Can transfer liquids at high pressure without affecting its properties Material of construction: pump casing - stainless steel

Pu3:1 Air Operated pump, corrosion protected for use with water based fluids, such as Detergents, Windshield Fluids, Water etc. Wetted components are made out of Stainless Steel Pump is designed to work in corrosive environments, ideal for use in Car Washers, Garages, Workshops, Lube Trucks, Industry etc. Reciprocating piston operated 63 mm dia. Air Motor Pumps have a built in Stainless Steel Strainer at inlet to keep contaminants away mp Only for 210 Litre Drums Delivers: Upto 14 LPM

Max Flow Rate: 586 Lpm (155gpm) 2" BSP (50mm) PP / PVDF Port Size: Inlet: 50.80mm (2" BSP) Discharge: 50.80mm (2" BSP) Air Inlet: 12.70mm ( 3/8" BSP) Air Exhaust: 19.05mm ( 3/4" BSP) Suction Lift: Dry: 4.57mm(15') Wet: 7.62mm (25') Teflon: Dry: 3.05mm( 10') Wet: 6.09mm (20') Max Particle Size (Dia.): 6.35mm (0.250")

INDO-AIR Vacuum pump has a universal design with the feature to convert it to a single stage compressor. This feature is very useful for large tank leakage test under vacuum or under pressure. Dry type vacuum pump-only useful for handling of gases. Easy to install requiring, no foundation. Higher efficiency compared to other types or other makes of vacuum pumps. Low maintenance. Noise level under 80 DB, ideal for hospitals. While using liquid tanks in chemical plants for vacuum, the provision of scrubber tank is available as an additional equipment to prevent the liquid from entering the pump. Simple design makes it easy for any mechanic to dismantle and assemble the pump without any mismatch of the parts.

Compared with gas, electric and solar water heaters, air source heat pump can provide all-weather hot water with low energy cost. Together with Shanghai Jiao Tong University and other research institutions, Linuo Paradigma has developed a series of heat pump products for both residential and commercial applications and manufactured by the new established production line in Qingpu industrial park, Shanghai, China. All those products adopt world-leading Copeland compressor and high-efficiency heat exchanger, and are manufactured by ISO9001 facilities with strict performance test before ex-factory. The 4.0 COP (Coefficient of performance) of our heat pump system means the operation cost is only 1/4, 1/3 and 2/3 of the electric, gas and solar water heaters’. Besides economical efficiency, heat pump system also has advantages on safety issues since avoiding of electric leakage, heat without water, gas explosion and carbon monoxide poisoning. The air source could be used in 24 hours/day and all weather conditions, which creates air source heat pump the new generation of green energy water heaters.

INDO-AIR Vacuum pump has a universal design with the feature to convert it to a single stage compressor. This feature is very useful for large tank leakage test under vacuum or under pressure. Dry type vacuum pump-only useful for handling of gases. Easy to install requiring, no foundation. Higher efficiency compared to other types or other makes of vacuum pumps. Low maintenance. Noise level under 80 DB, ideal for hospitals. While using liquid tanks in chemical plants for vacuum, the provision of scrubber tank is available as an additional equipment to prevent the liquid from entering the pump. Simple design makes it easy for any mechanic to dismantle and assemble the pump without any mismatch of the parts.

Chambers A & B are alternatively filled and emptied by drawing liquid in through a common inlet © and out through a common outlet (D). The Diaphragms in each chamber are connected by a common shaft so that they move., backwards together. Compressed dry air is directed by the air valve (E) alternatively behind each diaphragm to power discharge strokes. Pump speed and therefore fluid flow-rate can be infinitely controlled by increasing or decreasing or decreasing air pressure and or volume.

The assistance of our experienced quality analyst guarantees us that we make use of quality raw materials for the production of our entire range. Therefore, our buyers enjoy flawless products. Reckoned as outstanding suppliers of AODD Pumps; we are a reliable choice amidst the customers.