Building Material Dealers in Ahmedabad

(122 products available)
  • Silica Cement Admixture VOLSIL

    Silica Cement Admixture VOLSIL

    99 - 120 / Kilogram

    • MOQ10000 Kilogram
    • Number Of FlowerConcrete Admixtures, Powder
    • MaterialEmulsion Additive
    • ApplicationCommercial Use, Triple Blend
    • Shelf Life2 Yrs
    • Purity90%
    • ConditionPowder
    • FormPowder
    • Packaging Type0-35 Kg, Jambo Bags
    • StandardTechnical
    • Packaging Size0-25 Kg
    • Country of OriginIndia
    • Brand NameVolsil
    • ClassificationSTANDARD
    • CAS No.ASTM
    • Other NamesSILICA CEMENT ADMIXTURE VOLSIL
    • EINECS No.ASTM
    • AppearanceWhite
    • PurityHIGH
    • PH value5.8 - 6.5
    • MOQ10000
    • StrengthHigh
    • Loading PortMundra Port, India
    • NameVOLSIL
    • BASEVOLCANIC
    • Volsil A-Sio2 is a pozzolanic material containing A-Sio2 amorphous silica and minor amounts of residual mineralsTest results indicated that the concrete specimens containing 5%, 10 %, 15 %, 20% A-Sio2ÃĀ‚  ÃĀ‚ replacement by weight for cement had the best compressive and flexural strength and the replacement of cement separately and together using a super plasticizing admixture could be utilized to improve the mechanical properties of the conventional concrete mixtures.Amorphous silica (a-SiO2) in fine-grained form possesses a high pozzolanic activity which makes it a valuable component of blended binders in concrete production. The origin of A-SiO2 applied in cement-based composites is very diverse. SiO2 in amorphous form is present in various amounts in quite a few supplementary cementing materials (SCMs) being used as partial replacement of Portland cement. In this work, the applicability of a commercially produced silica powder as a partial replacement of Portland cement in cement paste mix design is investigated. Portland cement CEM I 42.5R produced according to the EU standard is used as a reference binder. ÃĀ‚ silica is applied in dosages of 5 and 10, 15, 20 % by mass of cement. The water/binder ratio is kept constant in all the studied pastes. For the applied silica, specific surface area, density, loss on ignition, pozzolanic activity, chemical composition, and SiO2 amorphous phase content. For the developed pastes on the basis of cement-silica blended binder, basic physical properties as bulk density, matrix density, and total open porosity are accessed. Pore size distribution is determined using MIP analysis. Initial and final setting times of fresh mixtures are measured by the automatic Vicat apparatus. Effect of silica cement admixture on mechanical resistivity using compressive strength, bending strength, and dynamic YoungÃĀƒÂ¢ÃĀ‚ÂĀ€ÃĀ‚ÂĀ™s modulus measurement. The obtained data gives evidence of the workability of paste mixtures with silica, whereas the setting process is accelerated. On the other hand, the reaction activity of silica with Portland cement minerals results in a slight decrease of porosity and improvement of mechanical resistivity of cement pastes containing a-SiO2.
    ...more
    www
  • Kota Limestone

    Kota Limestone

    Get Price Quote

    • Number Of FlowerLimestone
    • MaterialNatural Stone
    • FeatureCharming Color, Excellent Finishing
    • Packaging TypeContainer For Export, Truck Load For Supply
    • We are chiefly engaged in the manufacturing and exporting of Kota Limestone in all over the world. The Kota Limestone are acclaimed amidst the clients for their charming color and excellent finishing. The Kota Limestone are offered by us in small as well as bulk quantities, as per the clients’ needs. Minimum Order Quantity : For Export : 1 containerFor Supply : 1 truck load
    ...more
    www
  • Ready Mix Mortar

    Ready Mix Mortar

    175 / Cubic Meter

    • MOQ100 Bag
    • Brand NameMOD
    • ApplicationFor Interior & Exterior
    • Number Of FlowerReady Mixed Concretes
    • Country of OriginIndia
    • Base MaterialRiver Sand
    • Ratio1:4 Mixture
    • Bag Size40kg Bag
    • Thickness10 Mm to 12 Mm
    • mod gold plaster is composition of uniquely designed mix of selected raw materials, it takes far lesser time to cure and retain water comparatively to any other product used in the construction market and therefore making it the Only product in the industry which exceeds the compressive strengths and curing measures set in national standards thus making it one and the only kind of product in its category.   APPLICATION CAN BE DONE BY MOST ADVANCED AUTOMATIC PLASTERING MACHINE.  
    ...more
    www
  • Furan Resin Mortar

    Furan Resin Mortar

    85 / Kilogram

    Based in Ahmedabad, we are bracketed among the leading Manufacturers, Suppliers and Exporters of the Furan Resin Mortar across the globe. The Furan Resin Mortar, offered by us, is processed and tested as per crucial parameters of the industry. Moreover, we can easily handle the bulk orders of Furan Resin Mortar as per the requirements of the clients. With us, stay assured of minimal pricing and prompt delivery.Highlights : Furan Resin Mortar is widely used for acid resistant bricks & tiles lining works as bedding & jointing mortar for tanks, floor, drain, foundation, chemical reaction vessels, and neutralization pit etc. Resistant: it is resistant to non-oxidizing acids, alkalis, salt, solvents, greases, detergents and oils. Carbon-filled Furan Resin Mortar is to be used to resist hot & highly concentrated alkalis, hydrofluoric acid, florid salted etc. Resistant to temperature- 170’c (max.)
    ...more
  • Construction Aggregates

    Construction Aggregates

    650 - 1,000 / Ton

    • MOQ10000 Kilogram
    • FeatureFine Finished
    • Thickness0-20mm
    • Country of OriginIndia
    • ApplicationRoad and Constraction Service Use
    • Yield95%
    • Grade StandardA Grade
    ...more
  • MIPRO-EPR High Strength Epoxy Repair Mortar

    MIPRO-EPR High Strength Epoxy Repair Mortar

    320 - 420 / Kilogram

    • MOQ250 Kilogram
    • BrandMIPRO-EPR
    • ApplicationConcrete Patch Repair & Surface Restoration
    • Material TypeEpoxy Resin Based Patch Repair Mortar
    • System TypeThree Component (Resin + Hardener + Quartz Filler)
    • Compressive Strength900 Kg/cm² (After 7 Days)
    • Flexural Strength275 Kg/cm²
    • Tensile Strength140 Kg/cm²
    • Pot LifeApprox. 30 Minutes At 25°C
    • Initial Hardness24 Hours
    • Usage AreaIndustrial Floors, Tanks, Sea Walls & Chemical Plants
    • We offer MIPRO-EPR High Strength Epoxy Repair Mortar, a premium epoxy resin based patch repair mortar designed for concrete patch repair and surface restoration. Our three-component system includes resin, hardener, and quartz filler, ensuring exceptional compressive strength of 900 Kg/cm² after 7 days. With flexural strength of 275 Kg/cm² and tensile strength of 140 Kg/cm², our product guarantees durability. Enjoy a pot life of approximately 30 minutes at 25°C, allowing for easy application. Achieve initial hardness in just 24 hours, making it ideal for industrial floors. Trust MIPRO-EPR for top-quality solutions as a leading Manufacturer, Exporter, and Supplier.
    ...more
    www
  • Crack Repair Mortar

    Crack Repair Mortar

    300 / Bag

    • Packaging Size40 KG
    • ApplicationFor Construction Indusstry
    • Brand NamePure
    • Packing TypePP Polybag
    • WARRANTY15 Years
    ...more
  • Epoxy Grout

    Epoxy Grout

    Get Price Quote

    Backed by a team of deft professionals, it has become easy for us to furnish divisive demands of the buyers and that too within shortest time possible. We are working in close coordination with the team members and management; they make every endeavor to keep the products piled up safely in our capacious warehouse. By this, we make deliveries in the committed time span.
    ...more
  • Raw Perlite

    Raw Perlite

    Get Price Quote

    We have complete allegiance in providing premium quality Raw Perlite. Owing to our client focused R & D activities we are able to procure most genuine grades of perlite from authentic sources. Demanded widely for manufacturing of refractory bricks, mortars and pipe insulation materials the offered product is available in raw form which is rigorously tested under certain quality parameters. Further, we have developed a state of art infrastructure and make sure to provide the highly demanded raw perlite in sterile packaging at the best price.
    ...more
  • Polyurethane Tile Grout

    Polyurethane Tile Grout

    145 - 420 / Kilogram

    • Drying Time24 Hours
    • UsageFloat / Trowel
    • Water ResistanceHigh
    • Brand NameTrident Engineering
    • FinishSmooth Joint Finish
    • Full Cure48-72 Hours
    • FlexibilityHigh
    • UV ResistanceHigh
    • Usage AreaIndoor / Outdoor
    • MaintenanceLow
    • Division Grouting Compound   Product Description Trident Polyurethane Grouts are advanced high-performance sealing and grouting materials made from polyurethane resins. They offer excellent flexibility, water resistance, durability, and strong adhesion for joints, cracks, gaps, tiles, and concrete surfaces. Ideal for wet areas, industrial floors, swimming pools, moving joints, and applications exposed to vibration or temperature variation.   Key Features & Benefits Superior flexibility Waterproof protection Strong adhesion Durable impact resistance Chemical resistant Fast curing system UV stable performance Smooth seamless finish Low maintenance Long service life   Applicable IS Code IS 15477 – Grouts for fixing tiles and flooring IS 3370 (Part 2) – Waterproof liquid retaining structures IS 13630-1 – Polymer modified materials   Applicable Industries / Recommended Uses Construction Infrastructure Waterproofing Marine Tiling Industrial Real Estate   Product Types Polyurethane Grout Flexible Tile Grout Waterproof Joint Grout Industrial PU Grout Pool Tile Grout   Solutions Handles joint movement Stops water leakage Resists oils and grease Prevents cracking Reduces maintenance costs Improves tile finish appearance   Featured Products Trident PU Tile Grout Waterproof Polyurethane Grout Flexible Joint Seal Grout   Related Products Epoxy Grout Cement Grout Tile Adhesive Waterproof Coating Crack Filler   Why Choose Trident Industry-leading performance Technical application support Premium raw materials Cost effective durability Eco-friendly manufacturing Reliable customer service   FAQS Q1. Can it be used outdoors?Yes, UV resistant for indoor and outdoor use. Q2. Cure time?24 hours light traffic, 48–72 hours full strength. Q3. Heat resistant?Suitable for moderate heat conditions. Q4. How to apply?Use rubber float or trowel after proper mixing. Q5. Safe for food areas?Yes, suitable where hygiene is important.   Substrate Tiles Concrete Ceramic Stone Wet Areas Pools Industrial Floors   Key Words polyurethane grout, waterproof grout, flexible grout, durable grout for high traffic areas, grout for swimming pools, chemical resistant grout, UV resistant grout, grouting for industrial applications, Trident polyurethane grout, best grout for tiles and joints
    ...more
    www
  • Sparkle Epoxy Grout

    Sparkle Epoxy Grout

    Get Price Quote

    • MaterialEpoxy
    • Packaging TypeSparkle
    • ApplicationConstruction,Industrial
    • Adhesive TypeSolvent Adhesive
    • Purity96%
    • Physical StatePowder
    • Adhesive Type Solvent Adhesive Usage Construction Purity 96% Application Industrial Physical State Powder
  • Calcite

    Calcite

    Get Price Quote

    Mineral Master offers Calcite under trade name ‘Master Carb’. Calcite is a natural calcium carbonate with extremely high whiteness, purity and free flowing in nature. Calcite is widely used in thermoplastic application because of its compatibility with polymers and other organic additives. Calcite has suspension properties, which increase the dispersibility in both aqueous and non-aqueous system. It acts as a spacing extender in liquid & powder paints. We offer Calcite for the applications in field of thermoplastics and paints. These fillers have chemically bonded surface, formed by unique surface treatment, which renders it extremely hydrophobic and greatly improves their compatibility with polymer and organic based additives. Advantages : Better gloss and whiteness in paints and powder coating applications Higher mechanical properties in thermoplastic applications Excellent dispersion properties Higher flow properties Prevents chalking  Applications : PP master batches, automotive and furniture compounds As a flux in glass industry and in sizing of textile goods Paints, inks, powder coating and ceramic industry Leather cloth industry Rubber industry
    ...more
  • Acid Proof Mortar

    Acid Proof Mortar

    300 / Kilogram

    • Brand NameDubond
  • Acid Proof Mortar

    Acid Proof Mortar

    Get Price Quote

    ACID PROOF BRICKS (38mm & 75mm thick) a EPOXY FLOOR COATINGS a ACID PROOF TILES (10mm to 25mm thick) a EPOXY SCREEDING LINING a RED MANDANA STONE FLOORING a RCC CHIMNEY BRICK LINING a CARBON GRAPHITE TILE LINING a ACID PROOF JOINT FILLING
    ...more
  • Dry Mix Mortar

    Dry Mix Mortar

    Get Price Quote

    • Number Of FlowerDry mix mortar
    • Brand NameLaxmi Group
    • ApplicationUsed directly just by adding water in construction site.
    • ConditionGood
    • Country of OriginAhmedabad,Gujrat
    • Min. Order QuantityAs per client requirement
    • We ar one of the well recognized manufactures, exporter and suppliers of various plant & machinery. Mainly cover aac plant , drying equipment ,gradation equipment, mixing equipment process equipment , mortar plant etc. What is dry mortar: dry mortar is also called pre-mixed mortar, which made in the factory by precise batching and uniform mixing. It can be used directly just by adding water in construction site. It has different properties though adding different additives. The demand for dry mortar has increased rapidly due to its outstanding merit compare to the mortar production in job-site. Description of simple dry motar production machines: laxmi series simple dry mortar mixing production line is designed based on the traditional mixer, is added a material conveying system, a storage bin and an automatic filling machine. The well-mixed materials will go into the storage bin via material conveying equipment and the mixer may be feed consecutively and work continuously in flow line production, moreover, it may realize automatic metering and filling, hence, it may not merely save the time and energies but also may be more accurate. Requiring little investment, but it may load, weight and package the materials automatically; no wondering, it is a simple but practical production line. Raw material cementing material cement, lime, plaster aggregate yellow sand, quartz sand, limestone, dolomite, expanded perlite etc mineral admixture industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc water retention and thickening material chemical additives main equipment for mortar making plant : material handling equipment drying equipment - sand dryer mixer - dry mix mortar mixer bucket elevator gradation – controlling calve screw conveyor rotary screen storage silo belt conveyor vibrating screen raw silo pnumetic conveying system packing machine structure salient features: - Ā· retention of important p
    ...more
  • Quartz Pebble

    Quartz Pebble

    Get Price Quote

    • MOQ100 Metric Ton
    • Quartz lumpsQuartz grains
    • Quartz powderQuartz grits
    • We are offering glassy quartz, quartz pebble , quartz grains, quartz manufacturer for making rubber. Quartz is the most abundant and most common mineral in the earth's continental crust. It is almost found in every geological environment. It has a hexagonal crystal structure and is made of trigonal crystallized silica. It is most varied in terms of varieties, colors and forms. These quartz mineral is also famous as silicon dioxide which is hard and durable in quality. We are offering extraordinary quartz which is acquired from best mines and mineral processing units of all over the world. The most widely used grade of quartz grains & powder with silica percentage of 98% - 99.9%. Solid surface, paint stripping, micro graving and micro blasting, first and glaze, sanitary ware, ceramic tiles, television picture tube, porcelain, refractory, engineered quartz stone, foundry, optical materials, components in electronic products.
    ...more
  • Boiler Bed Material

    Boiler Bed Material

    Get Price Quote

    We are a quality centric company and have established a modern warehouse that is equipped with an up-to-the-minute inventory control system. This has helped us in maintaining the quality of the products for a longer time. For making sure about the safety of the products during handling, transporting and warehousing, we make use of quality packaging material. And, this task is accomplished by our deft professionals. Used in : Furnaces Boilers Kilns Chimneys, etc.
    ...more
  • Acid Proof Mortar

    Acid Proof Mortar

    85 /

    • Packaging Size50-100 kg
    • MaterialEpoxy
    • Brand NameCorrosol Industries
    • Bonding Strength(Mpa)Greater than or equal to 0.5 Mpa
    • Packaging TypeHDPE Bag
    ...more
  • Weber Epoxy Grout

    Weber Epoxy Grout

    2,500 / Pack

    • Packaging TypeBucket
    • Packaging Size5.5 Kg
    • ApplicationConstruction
    • Brand Namesaint gobain
    • Featurestain free
    ...more
  • Wall Tie

    Wall Tie

    7 - 99 / Nos.

    • MOQ50 Pieces
    • Brand NameBhadja
    • FeatureHigh tensile strength
    • Overall LengthCustomisable
    • Surface FinishRaw or galvanized
    • Design Typebreakable or non-breakable
    • Strength GradeE250,E350,GP350 or Equivalent
    • Wall Thickness Support75 mm to 2000 mm
    • MaterialCarbon Steel, Mild Steel, Stainless Steel
    • ApplicationConstruction, Mivan framework
    • DimensionCustomisable
    • StandardAISI, ASTM, BS
    • TechniqueHot Rolled
    • TypeWall Ties
    • Thickness2-4mm
    • Country of OriginIndia
    • High Load-Bearing Capacity: Engineered to withstand severe structural loads without yielding or bending, maintaining the structural integrity of the wall profile. Perfect Alignment: Guarantees absolute dimensional accuracy for the entire formwork layout, which is critical for the speed and alignment of Mivan technology. Seamless Formwork Integration: Fully compatible with standard aluminum formwork hardware (pins, wedges, and wall tie sleeves), allowing for rapid assembly and disassembly cycles on site. Clean Fracturing: The break-off mechanism functions predictably, saving valuable labor time during the post-pour stripping process and minimizing concrete surface damage. Material: Fabricated from premium, high-tensile carbon steel sheet metal. The material is chosen specifically to ensure zero elongation and maximum tensile strength under extreme concrete pressure.
    ...more
  • Superplasticizing Admixture

    Superplasticizing Admixture

    46 / Kilogram

    • Country of OriginMade in India
    • Packaging TypeBarrel
    • Packaging Size275 Kg
    • BrandSika
    • Usage/ApplicationConstruction
    • Grade StandardChemical Grade
    • ADVANTAGESHigh water reduction. Higher strength and density. Improved consistence retention. Improved durability. Improved water tightness. Improved surface finish. Improved cohesion properties.
    ...more
  • 20mm Cover Blocks

    20mm Cover Blocks

    1 / Piece

    • MOQ500 Kilogram
    • MaterialRCC
    • ShapeSquare
    • ShapeSquare
    • Usage/ApplicationConstruction
    ...more
  • Decorative Stamp Concrete

    Decorative Stamp Concrete

    Get Price Quote

    We have made our mark as Manufacturer, Exporter and Supplier of Decorative Stamp Concrete in Maharashtra, India. Our adroit team creates the Concrete using a super strong concrete mix which is then stamped with specialized textured mats in order to create a surface texture that resembles natural stone, brick, paving or any other of variations. It is non-porous, impermeable surface. Its colors are 100% UV, which do not fade away as a result of direct sunlight.
    ...more
  • Quartzite

    Quartzite

    Get Price Quote

    We offer Quartzite. Quartzite stones are extremely hard and weather resistant stones. The natural quartzite stones makes a perfect choice for wall-cladding, roofing, flooring and all other types of interior & exterior applications. Having granolithic texture, these Indian natural quartzite stones are fireproof and non-slippery in nature. We can offer natural quartzite stone in different variations including Him White and Him Black. The quartzite stones can be honed, polished and cut to the size required by the clients.
    ...more
  • Polished Decorative River Pebbles

    Polished Decorative River Pebbles

    Get Price Quote

    The range of Polished Decorative River Pebbles we offer includes Black River Polished Pebbles and White River Polished Pebble. The Polished Decorative River Pebbles are used to beautify the interiors and exteriors of different places. We offer Polished Decorative River Pebbles in different hues and sizes as per the needs of the clients. Features Used for decorating interiorsFire proofAttractive looksPerfect finish
    ...more
  • Polished Pebbles

    Polished Pebbles

    Get Price Quote

    Create your own royal and relaxing space with our Polished Pebbles. A beautiful and mesmerizing floors and walls can be created through mosaics made of Polished Pebbles. At our end, Polished Pebbles are available in exclusive colors and texture, addressing divergent demands of the clients. Highlights : Durable Smooth finishExcellent resistance to weather conditionAttract designs
    ...more
  • Epoxy Grout

    Epoxy Grout

    2,700 / Bushel

    • MaterialEpoxy
    • ApplicationFloor, Tile Fixing, Wall
    • ApplicationAutomobiles, Cement, Concrete Coating, Home, Industry
    • FeatureAnti-Wrinkle, Dry Cleaning, Easily Washable, Eco-Friendly, Good Look, Good Quality, Quick-Dry
    • GradeTechnical Grade,Analytical Grade,ACE Grade
    ...more
  • Tuffex Gt Grout

    Tuffex Gt Grout

    Get Price Quote

    • Dosage100 ml / 1 kg of polymer grout
    • Dosage1 ltr / 10 kg of polymer grout
    • Shelf Life12 month with original packing in dry place
    • CoverageDepends upon the dosages.
    • ColorsWhite liquid
    • Ph9.5 (alkaline)
    • Viscosity14 mPa · s, rotor 1 RPM 100 Brookfield Method
    • Spindle no 4, rpm 100 tem.25°C
    • Solids content46 ± 1 %
    • Temperature rangeFrom +5°C to + 45°C
    • Shelf Life & Storage12 months in original packing condition. Protect from frost.
    • A synthetic polymer emulsions for use with dubond's cement based grouts. Suitable for use in interior and exterior locations in both dry and wet service conditions. Dubond TUFFEX GT is a polymer additive for dufill cement-based grouts. Not for use with adhesives. This admixture is manufactured under an approved quality assurance system conforming to BS EN ISO 9002 and in accordance with the requirements of the environmental standards and operational scope of BS 7750:1994. Green Building Rating Mineral > 30% Low Emission Low Ecological Impact Health Care Water Based Areas of ApplicationFor internal and external use ,in domestic, commercial and industrial applications for street furniture, in environments subject to heavy use, Natural stone, agglomerate materials, marble Flooring and walls, Suitable for use as an additive in cement-based grouts Suitable to grout homogeneous tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic of all types and formats Swimming pools, tanks and fountains, for grouting deformable substrates, also in areas subject toFeatures & Benefits Does not alter workability, ease of cleaning and interval before normal use Improves water repellence and surface hardness Increases the flexibility of grouts, guaranteeing the continuity of coverings laid on deformable substrates or subject to thermal expansion increases adherence Professional elastomeric latex Solvent-free Water-based flexibilizing agent for normal and rapid-setting mineral grouts A synthetic polymer emulsions for use with dubond's cement based grouts. Suitable for use in interior and exterior locations in both dry and wet service conditions. Dubond TUFFEX GT is a polymer additive for dufill cement-based grouts. Not for use with adhesives. This admixture is manufactured under an approved quality assurance system conforming to BS EN ISO 9002 and in accordance with the requirements of the environmental standards and operational scope of BS 7750:1994.   Green Building Rating Mineral > 30% Low Emission Low Ecological Impact Health Care Water Based Areas of ApplicationFor internal and external use ,in domestic, commercial and industrial applications for street furniture, in environments subject to heavy use, Natural stone, agglomerate materials, marble Flooring and walls, Suitable for use as an additive in cement-based grouts Suitable to grout homogeneous tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic of all types and formats Swimming pools, tanks and fountains, for grouting deformable substrates.Features & BenefitsDoes not alter workability, ease of cleaning and interval before normal use Improves water repellence and surface hardness Increases the flexibility of grouts, guaranteeing the continuity of coverings laid on deformable substrates or subject to thermal expansion increases adherence Professional elastomeric latex Solvent-free Water-based flexibilizing agent for normal and rapid-setting mineral grouts.Method of Application : Mixing For most applications dilute 1 part Tuffex GT with 2 parts water use the TUFFEX GT : water blend to replace the gauging water when preparing the grout for use. For internal and external use ,in domestic, commercial and industrial applications for street furniture, in environments subject to heavy use, Natural stone, agglomerate materials, marble Flooring and walls, Suitable for use as an additive in cement-based grouts Suitable to grout homogeneous tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic of all types and formats Swimming pools, tanks and fountains, for grouting deformable substrates, also in areas subject to thermal shock and freezing Does not alter workability, ease of cleaning and interval before normal use Improves water repellence and surface hardness Increases the flexibility of grouts, guaranteeing the continuity of coverings laid on deformable substrates or subject to thermal expansion increases adherence Professional elastomeric latex Solvent-free Water-based flexibilizing agent for normal and rapid-setting mineral grouts, Mixing Dubond's Du Fill cement-based grouts modified with Tuffex GT should be applied as directed in the appropriate product data sheet. The working time of the polymer modified grout may be shorter than that of the unmodified material, especially in higher temperatures. the colour of the set grout may appear slightly darker than when unmodified. use the same mix proportions throughout an installation to ensure niform colour. Performance The addition of Dubond's TUFFEX GT to dubond's dufill cement-based grouts greatly improves their physical properties and characteristics. increased mechanical strength. Provides greater adhesion to tile edges e.g. glass mosaics and fully vitrified tiles. Provides greater abrasion resistance. particularly important in heavily trafficked areas such as shopping malls. increased flexural strength and flexibility. Enables grouts to be used where limited movement/vibration is anticipated e.g. heated screeds and timber floors. educed water permeability. Provides greater protection to water sensitive backgrounds and minimizing the risk of efflorescence. Precautions & LimitationsDo not use on floors and walls where specific chemical resistances or absolutely no water absorbency is required; to grout elastic expansion or fractionizing joints; on substrates which are highly deformable, not fully dry or subject to moisture rising; on tiles or materials with porous or rough surfaces that are difficult to clean. Strictly keep to the indicated mixing ratio Apply the mixed product to a trial section first to check how the porous or microporous surface ceramic tiles or natural stone react to cleaning, as they may not be suitable for the use of grouts with latex additivesHealth & Saftey Precautions Keep out of reach of children. wear suitable protective clothing, gloves, and eye / face protection. after contact with skin wash immediately with plenty of clean water. in case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice Mixing For most applications dilute 1 part Tuffex GT with 2 parts water use the TUFFEX GT : water blend to replace the gauging water when preparing the grout for use. For internal and external use ,in domestic, commercial and industrial applications for street furniture, in environments subject to heavy use, Natural stone, agglomerate materials, marble Flooring and walls, Suitable for use as an additive in cement-based grouts Suitable to grout homogeneous tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic of all types and formats Swimming pools, tanks and fountains, for grouting deformable substrates, also in areas subject to thermal shock and freezing Does not alter workability, ease of cleaning and interval before normal use Improves water repellence and surface hardness Increases the flexibility of grouts, guaranteeing the continuity of coverings laid on deformable substrates or subject to thermal expansion increases adherence Professional elastomeric latex Solvent-free Water-based flexibilizing agent for normal and rapid-setting mineral grouts, Mixing Dubond's Du Fill cement-based grouts modified with Tuffex GT should be applied as directed in the appropriate product data sheet. The working time of the polymer modified grout may be shorter than that of the unmodified material, especially in higher temperatures. the colour of the set grout may appear slightly darker than when unmodified. use the same mix proportions throughout an installation to ensure uniform colour. Performance The addition of Dubond's TUFFEX GT to dubond's dufill cement-based grouts greatly improves their physical properties and characteristics. increased mechanical strength. Provides greater adhesion to tile edges e.g. glass mosaics and fully vitrified tiles. Provides greater abrasion resistance. particularly important in heavily trafficked areas such as shopping malls. increased flexural strength and flexibility. Enables grouts to be used where limited movement/vibration is anticipated e.g. heated screeds and timber floors. reduced water permeability. 4. Provides greater protection to water sensitive backgrounds and minimizing the risk of efflorescence. Precautions & Limitations Do not use on floors and walls where specific chemical resistances or absolutely no water absorbency is required; to grout elastic expansion or fractionizing joints; on substrates which are highly deformable, not fully dry or subject to moisture rising; on tiles or materials with porous or rough surfaces that are difficult to clean. Strictly keep to the indicated mixing ratio Apply the mixed product to a trial section first to check how the porous or microporous surface ceramic tiles or natural stone react to cleaning, as they may not be suitable for the use of grouts with latex additives Health & Saftey PrecautionsKeep out of reach of children. wear suitable protective clothing, gloves, and eye / face protection. after contact with skin wash immediately with plenty of clean water. in case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
    ...more
  • Epoxy Grout

    Epoxy Grout

    Get Price Quote

    • ApplicationTile joint
    • Packaging TypePolythene Bag
    • FormPowder
    • Brand NameJohnberg
    • Number Of FlowerCement Grout
    • Packaging Size1 kg & 5 kg
    • CategoryPolymer Modified Grout
    • CategoriesCementitious
    •  Grade Pemium
    ...more
  • Boiler Bed Material

    Boiler Bed Material

    4,850 - 4,900 / MT

    • MOQ10 Metric Ton
    • Country of OriginIndia
    • Number Of FlowerBoiler Bed Material
    • FormPowder
    • Resistance DurabilityHeat Resistance
    • MaterialAlumina
    • Size0.85-2.36mm
    • Usage1000
    • Boiler Crushed Refractory Bed Material. The products we offer are developed by a team of diligent professionals in accordance with international quality norms. In order to ensure the safe transits of offered boiler crushed refractory, we provide these in pack of 40-50 kg plastic waterproof bags. Moreover, we are capable of providing these products to the clients in bulk amount in accordance with their needs.Special characteristics : Fully Screened Material Free From Fine Particles Fully Resistant Against Clinker Formation Perfect Product For Obtaining Fluidized Action Accurate Particle Size Distribution Exceptional Chemical Purity High,I.D.T.(Initial Deformation Temperature) Low AlkaliĀ  Low Iron Contents No Free Iron Particles-Passed Through Iron Separators Perfectly Controlled Density Production capacity - 1000 Tons per month Delivery time - Ex-stock Minimum order quantity - 15 Metric Ton
    ...more
Filter by Locality
top