Chemical Pumps Dealers in Ahmedabad

Our company is an esteemed Manufacturer, Supplier and Exporter of Chemical Process Pump (FPE-F Series) from Ahmedabad, Gujarat. We fabricate the pump using high-grade components and latest knowledge, to ensure it conforms to industrial norms. Clients can rely on us for delivering bulk orders of Chemical Process Pump within postulated time.   Material of Construction : Pumps are manufactured in variety of materials such as     Stainless Steel as per ASTM A 351/743 Gr. CF8, CF8M, CF3, CF3M, CD4MCu, CN7M(Al 20)     Duplex Steel as per ASTM A 890/890M     Nickel Alloys as per ASTM A 494 / 494M Gr. Hastelloy B – C, CZ 100 (100% Nickel )     Other Alloys: SS 2324 / 2%NiCI / Ni-Resist / D2B / Monel / Inconel 600 / R – 55 / Ni 200     Cast Iron & special Alloy Cast Irons, SG Iron / Ductile Iron.     Carbon Steel / WCB.     Bronze / Alluminium & Various Non Ferrous Alloys.  Constructional features :Pumps are as per DIN 24256 and ISO 2858. The design is of back pull out type. Large variety of models are available to operate at 1450 rpm and 2900 rpm at 50 Hz and 1750 rpm and 3500 rpm at 60 Hz. Casing :The casing has axial suction and top centre line delivery. Smooth hydraulic passages ensure high efficiency. Normal design is for foot mounted pumps. Impeller :The impellers are of enclosed type and semi-open impellers can also be supplied. Hydraulic balancing of impellers is achieved either by back wear ring. The impellers are statically and dynamically balanced. Shaft :The shaft is supported by two antifriction bearings to take residual axial thrust and prevent axial float or radial run out. It is fully protected from the liquid handled by means of a shaft sleeve and PTFE gaskets between impeller nut, impeller hub and shaft sleeve. Stuffing box :The stuffing box is sealed by gland packing or by mechanical seal. Conversion from gland packing to mechanical seal is achieved by changing some standardised parts. Re-machining of stuffing box is not necessary. Stuffing box cooling is provided for high temperature applications. Bearings :The bearings are oil lubricated. Direction of rotation :Clockwise viewed from driving end.

Technical Details  Material of construction (with options): pump head - PVC/SUS 316/PVDF; diaphragm - PTFE coated EPDM; valve - alumina ceramic/hastelloy C Flow range: 0.02-1.1 l/min Pressure range: 0.3-1 MPa   Applications  Industrial wastewater treatment Chemical dosing for the sterilisation and neutralisation of wastewater Chemical dosing in food industry for sterilisation in clean-in-process (CIP) applications   Key Features  Compact size

Chemical process pumpWe fabricate Centrifugal Process Pumps that have horizontal single stage end suction. Centrifugal pumps correspond to the German standard DIN 24256 and international standard ISO 2858 in capacity and dimensions and in general as per API-610. Versatile in application, our centrifugal process pumps have the following uses: Industrial Applications Process Engineering Petrochemical Pumping Clear Capacity: 400 M3Hr Max. Head: 140 Mtr Ma

     Pumps can offer lower tip speed for any requirement for better efficiency.    Control plate port angle selected on basis of specific operating condition which reduce over compression & power.      Non pulsating vacuum.    Can handle air / gas.    Standard gland shaft seal / Mechanical shaft seal. Easy to maintain the pump as axial clearance is in millimeters. Rotor is dynamically balanced Construction : CI / GBZ / SS-304 / Alloy steel. Capacity : 20m3 / hr to 7000 m3 / hr Vacuum : Up to 700 mm of hg. Pressure : Up to 3.5 Kg / cm2

Chemical Process Pump to meet the perfection these are designed with utmost care and assure longevity. Further its compact & light-weight structure allows it to be easily placed inside original equipment.

DEPA® Air Operated Diaphragm Pumps, High Pressure Pumps, Series DB DEPA® Air Operated Diaphragm Pumps are a cost-effective alternative in pressure-maintaining operation since any elaborate and costly closed-loop or open-loop control is dispensed with. Overview DEPA® Air Operated High Pressure Diaphragm Pumps (series-M), type DB, are preferred by filter press operators. The DEPA® high pressure pumps are factory set to 13bar (188psi), 16bar (232psi) or 21 bar (305psi). They can be operated at the required working point. The variable pressures possible with the DEPA® pumps protect the filter press while the short filling cycles improve the productivity of the entire filter process. There are 3 sizes available so that the pumps can be individually adapted to requirements of the transfer tasks. While the body is made of cast stainless steel, various elastomer materials for diaphragms, valve seat,s and valve balls are also available.  

Owing to the dedication of our professionals, we have earned a reputed name in manufacturing, exporting and supplying the finest quality assortment of High Pressure AODD (Air Operated Double Diaphragm) Pump. In compliance with set industry standards, these pumps are manufactured by our professionals using quality tested components and modern technology. Further, clients can avail these pumps from us at reasonable prices. Features: Excellent performance Easy installation Long service life Specifications: 1” BSP (25 mm) PP / PVDF Max Flow Rate: 135 LPM (34 GPM) Port Size: Inlet: 25.40 (1” BSP) Discharge: 25.40 mm (1” BSP) Air Inlet: 9.53 mm ( 3/8” BSP) Air Exhaust: 12.70 mm (½” BSP) Suction Lift: Dry: 3.05 M (10’) Wet: 4.89 m (16’) Teflon: Dry: 2.14 m (7’) Wet: 3.98 m (13’) Max Particle Size (Dia.): 3.17 mm (0.125”) MOCs Also Available in: SS 316, PP, AL

Seal Less Pump A seal less fluids pump supplier and pumps are very effecient plasto series give a defferent types of solutions in making pumps, Seal Less pumps employs Magnetic drive arrangement for rotating the impeller. Ideal for handling corrosive chemicals, axeial flow pumps, solvents, petrolium products, kerosene pumps, pharmaceutical and food syrups etc. These pumps are vastly used in Chemical plants, Electroplating plants, Textile mills etc. Std. monoblock pumps are available with Glass Filled PP moc and TEFC Non Flameproof motor. Optional availability in PVDF and SS 316 construction with Flame Proof motors also.

To ensure maximum quality retention, we package our products in industrial-grade packaging materials that can brave mechanical damages and logistical jostling. Additionally, they are labeled to impart product information. Our company has all the necessary logistic resources and connection to make on time delivery of order(s).Features and benefits : Staged compression for optimum temperature profile within the pump and no requirement for cooling gas injection Inherently free draining Able to handle liquid or particulate carry-over Short gas path eliminates particulate build-up and corrosion - Edwards  patented design Can flush with solvents, water or steam No internal valves to block or corrode and no interstage condensers to create potential for corrosion This expertise is incorporated in the chemical dry pumps to satisfy the demanding requirements of the chemical, petrochemical and pharmaceutical industries. We offer a range of four pumps with 80 - 400 m3h-1 capacity, and ultimate vacuums of below 1 mbar. Our chemical dry pumps meet the highest safety and performance standards and are second to none in this respect. EDP pumps are based on Edwards- oil-free, non-contacting,award-winning, reverse claw mechanism. They provide consistent vacuum at high efficiencies and low costs of ownership. Dry pumps completely eliminate all problems of process contamination and creation of polluted effluent, which are experienced with traditional wet vacuum pump technologies. Simple robust construction with ample power ensures reliable operation even during process upsets Non-contacting mechanisms gives long life and high reliability Pump flammable gases safely Pump corrosive gases without corroding Designed for long life and easy maintenance Minimum of 25 years life expectancy Lower cost of ownership Tried and tested dry pumps : Market leader with many years of process industry experience More than 150,000 reverse stage

Pre-packaged, custom designed to suit operational and site requirement, modular, tested for leakages, and performance at the factory level hence ready to install systems.Installations that are difficult to execute due to hazardous area, they can be easily installed and operated.