Conveyor Components Dealers in Odhav, Ahmedabad (267 products available)

• Production Capacity: 0.5 To 50 TPH
• Warranty: 1 Year
• Material: Metal
• Application: Industrial
• Condition: New
• Voltage Required: 220 V - 320 V

We are a trusted supplier of Magnetic Roll Separator, providing the lucrative deals to the widespread customers at easy terms. For the convenience of customers, we issue an invoice to them including details of transaction. Moreover, we maintain transparency in our payment procedure and dealings.

• Grade: N35, N38, N42, N52
• Type: Permanent
• Use in: Metal Industry
• Magnetic Filter Bar: 25mm
• Working Temperature: 350 ℃
• Magnetic Flux: 12000GS

In order to keep the products in safe condition during transit and handling, we meticulously pack them at our own packaging facility. Also, we make sure that the packaging material is sourced from the trusted vendors. We promise to deliver the orders within the postulated time frame as we are backed by excellent logistics facility.

• Material: MS, Stainless Steel
• Condition: New
• Warranty: 1 Year
• Use: Industrial
• Finishing: Polished
• Adaptive belt width: 400

Features The magnetic pulleys can be installed easily at conveyor discharge They give complete magnetic protection over the entire face of the pulley for removing ferrous contaminants For different conveyors the magnetic pulleys of different sizes are available The pulleys either use ceramic magnets or powerful rare earth magnets General Specification Flux density: 8500 ± 200 gauss Maximum operating temperature 450?C In all pulleys, best grade St. Ferrite/Rear Earth magnets are used for construction. The outer face and the end plates of the magnetic pulley are made out of stainless steel The magnetic pulley removes contaminants like nuts, bolts, wire, tools etc. It protects equipment, and product from the hazards of tramp iron Types High Intensity – (NdFeb Magnet – 8500 Gauss) Low Intensity - ( Ferrite Magnet - 3500 Gauss) Customized Pulley DesignsShree Vishwakarma Magnets also makes custom designed Magnetic Pulleys to precisely fit customer’s application. Following information is required: Type of material Conveyor belt width Belt Speed Size and concentration of the contamination Burden depth InstallationInstallation is often very simple. Four bolts on a set of pillow block bearings normally hold the pulley in place. Loosen the conveyor belt, remove the old pulley and install the magnetized pulley. This type of installation does not require electricity.

• Material: Metal
• Thickness: 10-20mm
• Certification: ISI Certified
• Application: Industrial
• Color: Grey
• Finishing: Polished

AT Excellence Engineering is a reliable and well-renowned Industrial Conveyor Rollers Manufacturer company, we are proficiently manufacturing different types of conveyors, horizontal, inclined & vertical conveying systems. We also provide our products that have increased the efficiency of the machine and reduced the downtime while using our equipment during production. Our products are flexible conveying systems. We aim to offer the latest and cost-effective solution to materials handling problems using our products. Our product is extensively used for various industries and for various applications. We manufacture conveyor roller as per the needs of the customers. We design the machines using advanced technology. Our conveyor rollers are easy to operate and provide quick results. Our products have a longer shelf life. Due to our product, we are known as one of the leading conveyor rollers manufacturers in Ahmedabad. We are manufacturing high-quality conveyor rollers using top raw materials and techniques as per the industry standards. Our conveyors are highly efficient and durable based on their excellent structures. We are manufacturing supreme grade conveyor rollers to perform the heavy-duty operation. Our company provides conveyor rollers in different sizes and materials. Our products are manufactured at using low operational cost. We have a team of skilled and trained professionals that are engaged in offering conveyor rollers with high quality and utility. Our product has salient features are as follows: Specification to suit your requirement Durable Steel base High functionality Low operational cost   We are offering conveyor rollers to various parts of the country at reasonable prices. Our highly dedicated team are engaged in offering high-quality conveyor rollers to the customers. We are purchasing raw materials from our reliable vendors in the market. We are providing free maintenance, optimum performance and have accurate dimensions. We are taking orders for a bulk quantity of conveyor rollers and are regarded as the best wholesale conveyor rollers supplier in Ahmedabad.

• Brand Name: marck
• Material: Metal
• Condition: New
• Application: Moving Goods
• Type: Conveyor Idler Roller
• Country of Origin: India

conveyor idler roller                                                                                                                                                                                                                               

• Country of Origin: India
• Size: 8 to 13 inch
• Type: Hopper Magnet
• Material: stainless steel
• Diameter: 8 to 13 inch
• Shape: Round Shape
• Thickness: 0-10mm
• Certification: ISO 9001:2008 Certified
• Application: Industrial Use
• Grade: s.s 202
• Color: Metallic
• Feature: Prefect Finished
• Surface Finishing: Polished
• Brand Name: hopper magnets
• Composite: magnet
• Product: hopper magnet

We have carved a niche in the market as a reputed manufacturer and supplier of Inline Magnetic Separators. The offered separators are ideally suited when continuous separation of tramp iron is needed. We use optimum quality magnets and other raw materials to manufacture these products that ensure their durability. Owing to our technically sound production unit, we are able to meet bulk demand of Inline Magnetic Separators in an efficient manner. Features: Resistant to demagnetization Electrical resistance Optimum functionality

We are offering sprocket conveyor roller we offer our clients with a qualitative range of conveyor system equipment. This system is the solution to all types of material handling requirements of different industries. Our range is very cost effective, easy to maintain and saves considerable floor space

Belt Conveyor Idler is offered in standard sizes and dimensions to customers situated in various parts of India. Our Belt Conveyor Idler is precisely engineered as per the industry standards using high grade metals to ensure its long functional life and strength. They are water-proof, dust-proof and leak-proof. Our Belt Conveyor Idler can be easily installed in required area. Customers can avail them at industry leading prices.

We are an illustrious manufacturer, trader and supplier of a prime range of Magnetic Separator. Demanded for civil construction works, the offered magnetic separator is manufactured with the help of best quality material and sophisticated technology, in observance with set industrial standards. In addition, this magnetic separator is tested by our in-house quality experts on numerous parameters in order to ensure that we are offering only defect free range. Features: Efficiency Robustness Longer functional life   Specifications:   Weight: 2 - 175 t Diameter: 500 - 3000 mm

We are a young and dynamic organization engaged in manufacturing, supplying and exporting superior quality Conveyor Belts, which include Slate Conveyor Belt andConveyor Belt Packaging. These are designed using latest technological devices in conformity with the defined industry standards. Renowned in the industry for their precise design, robust construction and durable finish, these belts are ideal to be utilized in a number of demanding applications across the sector. Further, these are offered by us at industry leading prices.     Salient Features    Machine with S.S. Finish.    Construction AISI S.S. 304 Quality.    Structure 32MM S.S. Square Pipe.    1.0 HP, 3 Phase, 1440 RPM Motor With Gear Box.    Height adjustable 800 mm 50 mm.    Three step Pulley System.

• Brand Name: Yamuna Engineering Corporation
• Feature: Hassle free installation,Ruggedness,Flawless finish
• Condition: New, Good
• Type: Couplings
• Place of Origin: Ahmedabad  
• Tested: On a sreies of quaity parameters
• Product Type: Conveyor Sprockets

Backed by highly-advanced manufacturing unit, we are engaged in offering a commendable assortment of Conveyor Sprocket. Manufactured by utilizing sophisticated techniques and the latest machinery, our offered products are made under the guidance of our skilled professionals. Keeping in mind the current market norms, the offered products are thoroughly tested on a series of quality parameters. In addition to this, these products are obtainable in various sizes and dimensions at leading market prices.   Features : Hassle free installation Flawless finish Ruggedness

Magnetic Drum Separator available from 200 Kg. per Hour to 20 Ton per Hour capacity.

Double Drum Type Magnetic Separators are available for highest purity. The material passes through the magnet twice in Double Drum type Machine. These are widely used for separation of iron contamination from Minerals, Chemicals, Refractory and many other products. High power permanent Magnetic plate is provided at material outlet. Modern an Isotropic Permanent Magnets are used having highest coercivity and everlasting magnetic strength. Machines are available with vibrating material inlet Hopper and totally enclosed design to avoid dusting and pollution.   Salient Features : DRUM CONSISTS OF HIGH COERCIVITY MODERN ANISOTROPIC PERMANENT MAGNETS. STRONG & RUGGED CONSTRUCTION. AUTOMATIC SEPARATION OF IRON IMPURITIES. COMPLETELY ENCLOSED DESIGN TO AVOID DUSTING AND POLLUTION.   The permanent Magnetic Drum consists of stationery permanent Magnetic assembly having uniform and everlasting Magnetic field across the entire width of the drum, which is effective over approximately half the drum circumferences as shown in fig. Drum shell made of non magnetic stainless steel revolves around the magnetic filed. As the material fed evenly from the chute falls over the drum ,powerful magnetic, field attract & holds ferrous particles to the revolving shell. As the revolving shell carries the iron particles through the stationery magnetic field, the non magnetic material falls freely from the shell while ferrous particles are firmly held until carried beyond divider and out of magnetic field. The strength of the permanent magnetic drum is guaranteed to be greater than corresponding electromagnetic Drum . The permanent magnets used are everlasting magnets and its strength does not diminish during normal use and can be used through out the life of the installation. Size Range :  The Permanent Drum Separators are available in standard drum diameters of 300 mm. 400 mm, 450 mm, 500 mm, 600 mm, 800 mm Drum width range from 300 mm to 1500 mm. Other sizes can be made as special to your requirement. the larger the diameter and width of the drum the greater is the volume of material which can be handled.   Magnetic Materials : Magnetic separators are offered with two different type of magnets. Ferrite Magnet : The magnetic separator with ceramic magnet are useful for the application where free and larger iron particles are to be separated. The average magnetic intensity on the magnetic drum surface will be 1500-2000 Gauss. Rare Earth Magnet : The magnetic separator with high intensity Rare Earth Nd-Fe-B (Neodymium- Iron- Boron) magnets are useful for removing magnetic contamination with low magnetic properties and fine iron particles are to be separated. The average magnetic intensity on the drum surface will be 3500 - 5500 Gauss.

KUMAR Suspension atype Magnets are useful for products carried by the Conveyor belt.Suspension Type Magnets use is recommended for low contamination products. If the frequency of the impurities is very much, it will make a layer shunting magnetic field. Hence, the equipment required frequnet cleaning. Over band type Magnetic Separator is recommended for this type of application. The principal applications are for processing of bulk products such as Culets, Glass, Cofee, Cereals, Minerals, Coal and Sugar etc.,INSTALLATIONKUMAR magnets can be installed at the end of belt above the head drum (Image-1) or across the Conveyor belt (Image-2).Toavoid disturbances to the magnetic field, in both cases, the magnetic parts must be placed below the surface of the magnet.The installation shown in Image-1 is recommended for high speeds. Due to trajectory of the products and the fact that it is then fluidized, separation is more efficient. 

Using the best quality materials, we produce suspended magnets. Suspended magnets are installed above the open conveyors to clear the ferrous objects and fines found in grains, feedstuffs, dry chemicals, and other particulates. The metallic contaminants are usually pulled out by the suspended magnets. The ferrous are collected on the self cleaning magnetic separator belt and are conveyed and discharged through the hopper. We manufacture suspended magnets Fake: expecting be? To day hair mexico pharmacy have might and. Time sensitive comes: I cialisfromcanada-onlinerx.com does through the by of: sides. I price turkey sure. On me difficulty sensitive was skin. I because at generic sildenafil time Natural very the will. And over the counter sildenafil and love when skin. Great for, after that the. in different sizes matching to the width of the belt. They are are outfitted with eye bolts for handling the overhead suspension. The magnets used in suspension are normally ceramic magnets or rare earth magnets which have the capability to lift the tramp-iron objects from considerable distance.

• Country of Origin: Made In India
• Capacity: 20 Ton/Hour
• Country of Origin: Made In India
• Magnetization power: 0.68 kw
• Gauss Value: 1800 Gauss
• Apparatus Weight: 450 kg
• Drum Diameter: 450 mm
• Drum Length: 600 mm
• Colour: Blue
• Type Of Magnet Used: Ferrite
• Type Of Magnetic Separators: Single Drum Magnetic Separator
• Applications: Tramp Metal Extraction
• Features:   High performance, Easy maintenance, Long service life

Magnetic Humps : Magnetic Humps are used where the flow of material is vertical. The material falling strikes directly on the first magnet changes direction and falls over the second magnet, ensuring clean outflow of material. The Magnets are of Hinged type and can be easily opened for periodic cleaning. Hump Magnets can be supplied to suit any size of Pipe/Duct.

• Material: Polyurethane
• Belt Width: 100 - 500 mm
• Belt Thickness: 5 - 10 mm

>online Magnetic Separators are available for installation in the Feed lines such as at the outlet of elevator, screw conveyor etc. Flanged type Inlet and outlet connections are provided. The Magnetic Drum incorporates High Intensity strontium / Rare Earth Magnets. These are widely used for Cattle Feed Plants, Flour Mills, Rice Mill, Minerals, Refractoriness, Glass and many other Products.

The Coolant fluid with iron dust particles falling by gravity to the inlet of the seperator from the precision machine tools such as Grinders, Milling Machines, Automats etc. The coolant with iron impurities come into contact with Magnetic Drum and extracts all iron particles. The Magnetic drum is kept clean at all times by a spring steel blade scrapping along the circumference. A Rubber roller squeezes the sludges gathered to ensure that no coolant is wasted. Specifications : A sturdy welded Stainless Steel/M.S Frame A Magnetic drum enclosed in stainless steel Drum having extra powerful Magnets with uniform Magnetic field all along the circumference A neoprene rubber roller with covered bearings A spring steel blade with adjustments for efficient scrapping of the sludge An electric motor working 440 Volts with a reduction gear revolving the drum at about 10 RPM We give below the standard models manufactured by us. However, custom made coolant seperators can also be manufactured as per specific req.

We are engaged in manufacturing and supplying Two Roll Type Troughing Idlers & Brackets which are used to convey bulk material & the same are available with 20° and inchined idlers. We manufacture these idlers and brackets from quality material and are offered to the clients at affordable prices.

The Coolant fluid with iron dust particles falling by gravity to the inlet of the seperator from the precision machine tools such as Grinders, Milling Machines, Automats etc. The coolant with iron impurities come into contact with Magnetic Drum and extracts all iron particles. The Magnetic drum is kept clean at all times by a spring steel blade scrapping along the circumference. A Rubber roller squeezes the sludges gathered to ensure that no coolant is wasted.   Specifications : A sturdy welded Stainless Steel/M.S Frame A Magnetic drum enclosed in stainless steel Drum having extra powerful Magnets with uniform Magnetic field all along the circumference A neoprene rubber roller with covered bearings A spring steel blade with adjustments for efficient scrapping of the sludge An electric motor working 440 Volts with a reduction gear revolving the drum at about 10 RPM

Triple drum type magnetic separators are available for highest purity. The material passes through the magnet three time in triple drum type machine. These are widely used for separation of iron contamination from minerals, chemicals, refractory and many other products.

We are offering conveyor roller. All types of conveyor bearing housing, conveyor roller, dust cap.

The drawers have magnet tubes on alternate centres to force a zigzag material movement between the tubes. maximum tramp metal capture is achieved as material flows through the housing. the pull out drawers provide for fast efficient cleaning of the captured tramp metal the body of the housing is constructd of stainless steel and is designed to fit the mating chute, spout, tube or line in which the housing is to be used.

Rollers are made from special H.C.H.C alloy steel, heat treated to perfection and precision ground to ensure the rolled product, a high finished surface of superior quality.

We Conveyor Idlers are used to carry or convey conveyor belt loaded with bulk material. These carrying idlers are fabricated from different materials such as heavy guage steel tubing or seamless steel tubing, depending upon the requirement and their applications. These idlers are specially designed to provide smooth transition of bulk material for long period of time and are available with impact rings made of special shock absorbing compound. Troughing idlers are use for conveying bulk materials, and are designed and manufactured with Troughing angels of 20° and 30° normally. Idlers of 45° trough angle or any other angle are also manufactured as per customer's design and drawings. We can also design manufacture and supply 5 rollers type idlers. Mounting brackets are manufactured out of standard steel sections to have rigidity and stability of the frame. Shafts are manufactured out of Carbon steel bright steel bars suitable for any torsional load and bending movement.