Conveyor Components Dealers in Ahmedabad

The magnetic Drum pulley replaces the drive pulley at the end of conveyor belts. In view of the wide variety of conveyor belt types, the drum pulley are supplied made to measure and ready for installation. As the figure clearly show, the magnetic head roller extracts the iron particles from the material flow and carries them to the underside of the belt where they are removed and collected. Head roller magnets for conveyor belt are supplied in permanent magnets.     The version with permanent magnets are fitted with powerful and An-Isotropic Hard ferrite Magnets /high intensity Rare Earth Nd-Fe-B Magnets and operate without the need for power supplies. The magnet system is available in two types: with Longitudinal polar field distribution for use with low levels of iron contamination and thin material layers, and with lateral polar field distribution for greater material thickness and larger iron particles.   

The permanent Magnetic Drum consists of stationery permanent Magnetic assembly having uniform and everlasting Magnetic field across the entire width of the drum, which is effective over approximately half the drum circumferences as shown in fig Drum shell made of non magnetic stainless steel revolves around the magnetic filed. As the material fed evenly from the chute falls over the drum ,powerful magnetic, field attract & holds ferrous particles to the revolving shell. As the revolving shell carries the iron particles through the stationery magnetic field, the non magnetic material falls freely from the shell while ferrous particles are firmly held until carried beyond divider and out of magnetic field The strength of the permanent magnetic drum is guaranteed to be greater than corresponding electromagnetic Drum .The permanent magnets used are everlasting magnets and its strength does not diminish during normal use and can be used through out the life of the installation. Size Range: The Permanent Drum Separators are available in standard drum diameters of 300 mm. 400 mm, 450 mm, 500 mm, 600 mm, 800 mm Drum width range from 300 mm to 1500 mm. Other sizes can be made as special to your requirement. the larger the diameter and width of the drum the greater is the volume of material which can be handled Magnetic Materials : Magnetic separators are offered with two different type of magnets: Ferrite Magnet : The magnetic separator with ceramic magnet are useful for the application where free and larger iron particles are to be separated. The average magnetic intensity on the magnetic drum surface will be 1500-2000 Gauss. Rare Earth Magnet : The magnetic separator with high intensity Rare Earth Nd-Fe-B (Neodymium- Iron- Boron) magnets are useful for removing magnetic contamination with low magnetic properties and fine iron particles are to be separated. The average magnetic intensity on the drum surface will be 3500 - 5500 Gauss. 

Superior abrasive resistant belts are designed for carrying materials of highly abrasive nature like rocks, lump ores, lime stones and other materials of abrasive nature. Specially treated compounds to control faster wear and tear of rubber is used in making these belts.

Self-Training Carrying Idler are installed between the normal idlers to adjust the transverse displacement caused by unevenly loading, wet condition of bottom of belt side and bad training of belt. When the carring belt moves against the guide rollers on either side, owing to difference of friction force between both sides, the upper stand is swiveled to center the belt. Then zigzag movement and abnormal damage of belt can be eff-cierntly prevented. Generally, it is installed 5m from the front(end) pulley and 10m from the others.

Shotblasting is a method used to clean, strengthen (peen) or polish metal. Shot blasting is used in almost every industry that uses metal, including aerospace, automotive, construction, foundry, shipbuilding, rail, and many others.

We are offering a wide range of Endless Belts. These Endless Rubber Belts are widely used for conveying materials from one place to another. Our vendors manufacture these Endless Rubber Belts in cotton linen and Kevlar apart from nylon, so that the products are resistant to heat up to 25 degrees celsius.

Supported by a team of deft experts, we have been able to offer a range of PTFE Belt for Garment Fusing Machines. These are made using various type of seam and guiding systems from tightly woven fiber glass cloth as per international norms. The glass cloth used in our offered products comes in varied thickness from 0.25mm and 0.35mm, coated with conductive grade PTFE- black colored. All our products are widely acclaimed for having highest thermal conductivity (best heat transfer) for collar and cuff fusing machines. For meeting the diverse needs of clients, we offer special belts used in shinko summit machines, made with 2 layers of PTFEGlass cloth of thickness 0.30mm in tan and black color and in uniform thickness for smooth running.

backed with a team of skilled professionals, we are involved in offering our clients a huge collection of heat resistant conveyor belt. Precisely manufactured using quality approved raw material and contemporary techniques by our deft professionals. This conveyor is used to prevent from external injuries. Furthermore, the provided belt is duly examined on several parameters of quality to ensure its quality. This belt is widely used in material handling machines. We offer this belt in numerous sizes within promised time frame at a budget friendly price. features : sturdy construction anti-corrosive durable finish standards

KUMAR Suspension atype Magnets are useful for products carried by the Conveyor belt.Suspension Type Magnets use is recommended for low contamination products. If the frequency of the impurities is very much, it will make a layer shunting magnetic field. Hence, the equipment required frequnet cleaning. Over band type Magnetic Separator is recommended for this type of application. The principal applications are for processing of bulk products such as Culets, Glass, Cofee, Cereals, Minerals, Coal and Sugar etc.,INSTALLATIONKUMAR magnets can be installed at the end of belt above the head drum (Image-1) or across the Conveyor belt (Image-2).Toavoid disturbances to the magnetic field, in both cases, the magnetic parts must be placed below the surface of the magnet.The installation shown in Image-1 is recommended for high speeds. Due to trajectory of the products and the fact that it is then fluidized, separation is more efficient. 

This is a unique device to protect Plastic Extrudes/Moduling Machines against iron contamination such as Nuts, Nails, Iron Bits etc. and ensure the trouble free and smooth operation of the machine. Four standard sizes both in Round and square are available and can be selected on the basis of the size and shape of Hoppers. High power Magnetic Rods are provided which prevents any iron material to enter in to the Machine. Special size Hopper Magnets are also supplied. Most useful for Plastic, rice Mill, Flour Mills, Cattle feed & Guar Gum industries. Available in S.S. 304/316 construction also for Dyes & Chemical Industries.  

We are offering sprocket conveyor roller we offer our clients with a qualitative range of conveyor system equipment. This system is the solution to all types of material handling requirements of different industries. Our range is very cost effective, easy to maintain and saves considerable floor space