Conveyor Roller Dealers in Ahmedabad

  We make a wide range of Conveyors  Ropper classified as – Powered and non powered version conveyors using standard Precision bearings for heavy loads (250 kgs and above) and pressed bearings for lighter loads.Many combinations offered in terms of Roller Pitch, Roller Diameter, Roller Moc, between frame width. Rollers are spring loaded with Hex axle or round axle. Please ask for our detailed catalogue Conveyor We follow international standards of quality while manufacturing our range of Roller Conveyors. These conveyors are classified as powered & un-powered roller conveyors and are used for applications ranging from medium to heavy loads. We pay attention even to the minutest detail as we engineer each roller from ERW pipe and provide bearings and stationary shafts at both the ends. These rollers are assembled in a frame in such as manner that one or the other roller can be removed anytime without even disturbing adjacent rollers. Specifications: Modular construction Available in standard length of 2500 mm Adjustable leg supports for easy installation and leveling at site. Our range of un-powered rollers does not require any power to get operated and the conveying of components is done by pushing the component or by gravity. We also design and develop angle of declination for gravity roller conveyors after considering the load of the component. These rollers are free to move and possess following specifications: MOC – MS, SS 304, SS 316 MOC for Frames – MS powder coated, SS 304, SS 316 Rollers – galvanized, chrome plated or PU coated Optional attachments: Adjustable / fixed side guides Castor wheels for easy movement of conveyors. Drip trays Impact zones for impact loading Pneumatic lifters, stoppers, pushers etc CONVEYORS Roller Conveyors We follow international standards of quality while manufacturing our range of Roller Conveyors. These conveyors are classified as powered & un-powered roller conveyors and are used for applications ranging from medium to heavy loads. We pay attention even to the minutest detail as we engineer each roller from ERW pipe and provide bearings and stationary shafts at both the ends. These rollers are assembled in a frame in such as manner that one or the other roller can be removed anytime without even disturbing adjacent rollers. Specifications: Modular construction Available in standard length of 2500 mm Adjustable leg supports for easy installation and leveling at site. Our range of un-powered rollers does not require any power to get operated and the conveying of components is done by pushing the component or by gravity. We also design and develop angle of declination for gravity roller conveyors after considering the load of the component. These rollers are free to move and possess following specifications: MOC – MS, SS 304, SS 316 MOC for Frames – MS powder coated, SS 304, SS 316 Rollers – galvanized, chrome plated or PU coated Optional attachments: Adjustable / fixed side guides Castor wheels for easy movement of conveyors. Drip trays Impact zones for impact loading Pneumatic lifters, stoppers, pushers etc  

we offer plastic roller manufacturer of various types of rubber rollers manufacturing process a. giving appropriate hardness depending on type of printing b. wide range of coating to counter chemical solvent effort. c. outstanding rubber surface finish without porosity. d. uniform hardness all over surface within = 1 shore -a- variation. e. no run out on finished diameter with reference to bearing size. advantages of our printing lamination rollers - long life - best printing result - maximum color registration - minimum or no chemical effect - anti-static information required for offer: 1. m.s. shell diameter 2. thickness of m. s. shell. 3. rubber finished diameter and rubber hardness face length of the roll. 4. fixed shaft roll (or) 5. hollow roll ( ball bearing are fitted inside both side of the face ends) 6. total length of the roll with both side shafts. 7. shaft diameterskeywaysbearing sizes 8. rubber to be used rubber hardness required.( with +- 5 shore a) 9. chemical resistanceabrasion resistancetemperature resistance. 10. machine location and application of the roll like guide rolls, nip rolls, pressure rolls, and squeeze roll etc.

Spray Teflon coating is done on Teflon Roller to avoid sticking of materials on the surface. This type of spray coated rolls having limited life as the roll touches any hard surface the Teflon coating get removed. Upper Teflon Roller is supplied for rubber or other type of Rolls for non sticking applications. These Teflon sleeves are not manufactured in India and get imported require a longer delivery period. Teflon Roll is available for specific diameters and length only. We are believed as one of the most reliable Non-Stick Teflon Roller Exporters from Ahmadabad, Gujarat.

The straight tracking of the belt may be compromised by the type of conveyed material, especially when this material is sticky and thereby adheres easily to the belt surface. In this case, material is also deposited on the return rollers that support the belt, adding an irregular addition of scale to the roller itself. As a consequence, not only wear and tear of the belt occurs, but forces are brought into play to move the belt away from its correct track. Return rollers with spaced rubber rings contribute largely to eliminating the build up of scale that forms in certain conditions on the belt surface. The rings are pointed, assembled at intervals, in the central part of the roller, where they have the scope to break up the scale which normally is present at the belt centre; meanwhile flat rings mounted in groups at the extremities of the belt, support and protect the belt edges, also in cases of limited belt wandering.

Conveyor Idlers are used to carry or convey conveyor belt loaded with bulk material. These carrying idlers are fabricated from different materials such as heavy guage steel tubing or seamless steel tubing, depending upon the requirement and their applications. These idlers are specially designed to provide smooth transition of bulk material for long period of time and are available with impact rings made of special shock absorbing compound.   Troughing idlers are use for conveying bulk materials, and are designed and manufactured with Troughing angels of 20° and 30° normally. Idlers of 45° trough angle or any other angle are also manufactured as per customer's design and drawings. We can also design manufacture and supply 5 rollers type idlers. Mounting brackets are manufactured out of standard steel sections to have rigidity and stability of the frame. Shafts are manufactured out of Carbon steel bright steel bars suitable for any torsional load and bending movement.

Leo Rubber Industries Manufacture Convey Rollers / Conveyor Rollers. The conveyor rollers are available in different Materials as per specific need. Conveyor Roller available with high Wear resistance, abrasion resistance & Corrosion resistance. Different Shapes, Sizes, Maerial conveyor rollers are available for your need. Please ask Us for your requirement.

We have gained recognition as an eminent enterprise, devotedly engaged in offering a broad range of Conveyor Roller. Using quality assured raw material with the assistance of hi-tech machinery, these rollers are manufactured under the strict vigilance of diligent workforce at our well-equipped production unit. In addition to this, we provide these rollers in numerous specifications, in order to meet varied needs of our clients. Our patrons can purchase these rollers at market leading prices within stipulated time frame.

Avail from us a qualitative range of Conveyor Rollers that is known to possess long lasting life and higher efficiency. Apart from being resistant to corrosion and abrasion, the Conveyor Belt Rollers available with us are also easy to maintain. We provide these Industrial Conveyor Rollers in a number of shapes, materials, sizes, weights, lengths and technical specifications as per the exact needs of our customers at market leading prices. For this reason, we are one of the largest Manufacturers in our domain. Having new configurations and sophisticated controls, our Gravity Conveyor Rollers are most effective while handling heavier items. Used extensively in shipping, receiving and assembly areas, our other types of rollers include Automated Roller Conveyor, Unit Load Conveyor, Flexible Conveyor and Gravity Skate Wheel Conveyor.

Material: M.S. Delivery Time : 1-2 weeks (Terms & Conditions) Key Performance Indicator Rational Price. Best quality in class online technical assistance & service support. 99% customer satisfaction Ratio world-wide. Providing : Mat Finish / Mirror Finish / Supper Finish Use In : All Kind of lamination Plain & Also in Chilling & Hitting Roller Type of Plating : Hard Chrome Plating Copper Plating ( Aneiox Roller )Ceramic Plating

We provide long life conveyor rollers having characteristics like High Density Material, Anti-acidity, Anti-alkaline, Anti-static agent, Suitable for Adverse Circumstances, Suitable for Highly Pollution Environment, Suitable for Humid Environment , Silent Rotation, Low Friction Rate, Damage Free Belt, can replace Metallic rollers and Inexpensive.

We have successfully manufacturing jari rollers which are designed in such a way as to have accurate winding. Which can withstand abrasion, pressure and temperature.

We offer stainless steel roller. We feel pleasure to present ourselves as the leading manufacturer, exporter and supplier of a wide collection of s.s roller. The roller provided by us are manufactured with utmost precision using ultra modern technology at our premises in compliance with the set industry norms. Available in different lengths, sizes, dimensions and technical specifications, these roller are extensively used in textile, paper, printing, plastic and other industries. Apart from this, the offered roller are thoroughly examined by our quality controller against several quality parameters to ensure their quality. features: precisely engineered optimum performance dimensional accuracy