Conveyor Components Dealers in Hyderabad

PML Overband Magnetic Separators are placed above open conveyors to arrest ferrous objects and fines found in grains, feed stuffs, raw and processed products, dry chemicals, salt, ceramics, Clinkers in Cement Industry, Coal conveying in power plants and many other products. Overband Magnets are used for separating big Ferrous particles like lugs, nuts, bolts, rivets, ms plates, angles, channels and tools from moving material on a conveyor belt.

Timely delivery of the orders is assured with us as we are backed by one of the most sophisticated transportation facility. By making use of quality packaging material, we pack the entire lot in a safe manner ensuring zero damage at buyer's end. The packing procedure is conducted under the guidance of experts.   More About Owing to our rich experience and vast knowledge of this domain, we have been able to offer high quality Take Up Belts to our valuable customers. 2" X 50" Teeth/Rib 3" X 64" Teeth/Rib 4" X 63" Teeth/Rib 4" X 63" Curve/Rib 4" X 63" Plain/Rib 6" X 72" Teeth/Rib 6" X 80" Curve/Rib 8" X 85"Teeth/7Rib White 8" X 120" Curve/7Rib White 10" X 110" Curve/10Rib White 12" X 126" Teeth/12Ribs

Air Slide without the use of moving parts, these gravity conveyor transport fine, dry bulk materials, with a minimum of abrasive wear on the conveyor. Dry materials flows down inclined conveyor, fluidized by low-pressure air entering beneath porous medium. The Air Slide conveyor is easily installed , with simple floor or overhead support which released valuable floor space for other used. Operation is dustless and noiseless with extremely low power consumption. Conveyor line needs no lubrication ,and is self-cleaning ,so there is almost no maintenance

Electronic conveyor belt scale system enables the weighing of bulk materials carried by conveyor belts during the conveying process. The flow amount (capacity) is proportional to the speed and the material on the belt. Conveyor Belt Unit With Idler(s); They are designed to fit every kind of conveyor belts used in the industry and located in place of one or a group of idlers where the belt moves on. The unit is a steel construction which realizes the weight of the bulk material on the belt by means of load cells. Depending on the single-idler group construction (SIB) with two load cells or multi-idler group construction (MIB) with 4 load cells are used. The protection is IP68 class. Both, MIB construction and SIB construction offer the same high level of accuracy which is approved by tests in ESIT Laboratories. The load cells have an IP68 class protection while the indicator has IP66 grade protection. Control Terminal; The measured value is displayed digitally by the microprocessor based model LCA control device. Daily, statistical data can be prepared and printed if LCA terminal is connected to DLMS software.

PMG Hump Magnet provides an effective way for removal of iron contamination from gravity fed dry free flowing material such as feed, grain, wood chips, plastics, etc. Material enters the Hump magnet and after passing over the first powerful magnet is forced to change the direction of the flow over the second magnet. The tramp iron which is the heavier particle comes in contact with the magnetic face thus ensuring their removal twice over.The hump magnet can also be designed in half hump construction with one Plate Magnet. The ferrous contamination stays on the face of the magnet which can be removed manually by swinging open the magnet.

We manufacture special purpose conveyor belt, using premium quality rubber, PVC, PU, Teflon, Nylon, Cotton, Polyester. To strengthen and enhance the durability of our conveyor belt we use steel cord. We manufacture chevrons belts that are available in wide range of designs that can transmit both wet and loose materials on uphill or incline drives. The chevrons we use can be made up of both PVC and rubber cleating. The wide varieties of chevron we offer are: MOLDED CHEVRON CONVEYOR BELT: we integrate stock chevron configuration during the molding of our actual belt manufacturing process. SLITTABLE CLEATED BELT: we integrate Mini-Chevron and V-Cleat patterns during the molding of our belt. These slits are appropriate for our conventional width. CUSTOM CHEVRON CONVEYOR BELT: Our molded chevrons are available in standard and customized patterns. CLEATED FOOD GRADE CONVEYOR BELT: Our belts are molded in a homogenous process to provide a smooth flawless surface for effortless cleaning in rigorous sanitary conditions. CUSTOM RUBBER CLEATING: Our cleats and chevrons are attached with the belt using a proprietary rubber vulcanizing process. For greater durability and utmost service life, we use high grade compounds. THERMO WELDED PVC CLEATS: We use hot thermo-weld for our PVC cleats to form a harmonized blend of cleat and cover. Our blend provide outstanding cut as well resistance against chemical and is equally stronger as the cover to the carcass. SIDEWALL BELT FABRICATION: It consists of a diverse variety of value-added profiles and operations, which adds value to fabricated flat belting.

Imported pvc conveyor belts: importers and suppliers of pvc, pu, pu, pe, silicon coated conveyor belts. We will supply belts in general and food grade and with cleats, side walls and profiles. Ply-1 to 3, thickness- 0.9 to 6 mm and in green, blue, white, black in shining and mat

Hitech has been manufacturing Idler Rollers and Brackets as per Indian/International standards and of-course customized requirements too.Hitech's manufacturing facility covers Idlers for capacities between 50TPH to 8000TPH. Typically Roller diameter ranges from 63.5mm to 219mm for 500mm to 2400mm width belt conveyors. The rollers are designed as per IS 8598/ISO 1537 specifications. ERW or seamless (HFS&CDS) steel tubes are used for the barrel of idlers as per IS 9295.Hi-Tech can make rollers to other standards too like DIN/JIS/CEMA etc., Deep drawing special quality CRCA steel sheets are used for forming the bearing housings, which are light self-weight, in order to reduce the power consumption of conveyor. The housings are automatic press-fitted and welded with the barrel by manipulator process, to form mono-block, simultaneously from both ends on rotating heads to ensure absolute concentricity and less inner welds tress and deformation.

We have efficiently utilized our storehouse space in the most efficient way as we have segregated units to keep the products sorted for quick and urgent deliveries. We are reckoned for the quality that we offer in our products. And, for maintaining it, we make use of the world-class raw material for manufacturing the products. Our avant-grade Horizontal Belt Conveyor is available in length 30m.

Idlers are the heart of a conveyor, since reliability and longer life can reduce down time for the conveyors, effect reduction in power consumption and increase belt life. Steel infratech idlers operate with very low coefficient of friction and are designed for reliable and guaranteed performance of upto 60,000 hours. Troughing Flat Carrying Idlers Troughing Flat Impact Idlers Self Aligning CarryingReturn Idlers Flat V Roll Return Idlers Self Cleaning Return Idlers

We are regarded as one of the illustrious Belt Feeder Exporters and Suppliers from India. We offer world renewed technology based Belt Weigh Feeder (BWF) mechanism with open and closed console based on the accuracy and material feed control requirement to measure the flow as well as control the material flow, requested by the process control team of production house. We know the importance of the raw material controlling and it�s feeding to the process house, so develop Belt Weigh Feeder to full fill customer choice. Our Industrial Weigh Belt Feeders are used in industries such as Thermal power plants, Fertilizers, Cement, Pulp & Paper, Steel, Sponge Iron, Food processing, Solvent Extraction, Pharmaceuticals, Mining, Animal feeding, Poultry feeding etc. We Know the Best, So Design � You Know the Better, So Select We develop the tailor made design to suite entire customer range from vast production areas. Should not effect to the bulk dead loads (tare weight). Should be able to work with minimal capacity sensors, so that we can take up the system with good resolution. e.g.: 100 t/h capacity sensor will be 50kg. Should not be any moving object with in the system mechanism. Avoided the feed back taken from the return belt (like general belt feeders), which may give falls feed back, due to spicks in the return movement path of the belt. Avoided intermediate signal conditioners and amplifiers between mechanism and computation & control device. Easy to install and commission the system (approximate time take to install the system will be 6 hours). Digital computation and control device will feed the sensor excitation voltages, with out any ripple or deviations so; life of the sensors will be well protected as well optimum result can be taken from the sensors. Entire programming through membrane keypad, no potentio metes or dip switches selection or any other manual operation. We develop the computation and control device with 24 bit �System on Chip� technology with resolution of 16,000,000 counts. Say good bye to multi card system, all operations performs with single and compact design with 24 bit �System on Chip� technology computation and control device. We proudly announcing the accuracy level start from, better than + /- 0.1% for design capacities. System having self maintainable features means system operating with self supervisory software. Our computation and control device can communicate any of external device like PLC, DCS or Host Computer by mean of 4 / 20 mA, STATUS RELAY OUT PUTS, RS485, RS232, PROFIBUS AND DEVICE NET Available Capacities: 100 Kg/Hr to 500 T/H, belt width 150 mm to 1500 Application Area : Thermal power plants, Fertilizers, Cement, Pulp & Paper, Steel, Sponge Iron, Food processing, Solvent Extraction, Pharmaceuticals, Mining, Animal feeding, Poultry feeding etc.