Hardness Tester Dealers in Ahmedabad

We are engaged in offering a comprehensive range ofPortable Hardness Tester. These testers are used for product testing of crankshafts, cylinder blocks, industrial knives, liner and assemblies. Moreover, these can also be used for testing the hardness of both inside and outside of surface of pipes, bushing and ball bearing rings.

Owing to the presence of our experts, we are providing Vicker Hardness Tester Calibration Service to our prestigious clients. This calibration service is extended at very reasonable rates. In addition to this, one can avail of these calibration services within a short time.

Digital display of gauge or differential pressure. -Select from one of 11 pressure units of measure. Hold data, record, Max/ Min, Backlight features. -Auto power off preserves remaining battery life. -Low battery indicator. -Power Supply:9 volts battery. -Meter includes hard ABS case, connection hose, battery and manual. -Simple fittings for hose connection. -Ideal Application: Medical equipment, Computer Peripherals, Pneumatic Controls, HVAC. -Dimension:72x182x30 mm/150g. -Optional RS232 software (Disk & PC cable). -Serial format: Baud rate: 2400 Baud, 1 Stop bit, 8 Data Bits. PXXX. XX

A very useful tool for all Engineers & Engineering works. Available in Various range, type and sizes.Application: Natural Rubber, Hard Elastomer, Soft Elastomer, Plastic, etc..

Salient Features Very compact, simple & Easy to operate. Cost Effective Selectable units of measurement like Kilopond (kp), Newton (N), Pound (lb or lbm), Strong Cobb (SC) Microprocessor based reading of measurement. Easy to calibrate. In-Built Thermal Printer. Statistical Data for the Maximum, Minimum & Mean Values are printed for the Tablet Tested at the End of the Test IQ/OQ Documents

The TBH 425 is tablet hardness and combination testers for automatic measurement of up to 10 samples. The samples are inserted in a star-shaped feeder which automatically transports the samples to the test station.

We used to supply this rubber hardness tester supplier in various part of our country at competitive market prices. This tester is majorly used in various industries and research organization for testing hardness of various kinds of metals. Our range finds application in various industrial sectors and is reckoned for its incomparable quality features. The maximum measuring range of the rubber hardness tester up to is 0-100 ranges. These Instruments are widely demanded different features like easy operation, accurate testing’s, high performance and durability. We offer this rubber hardness tester supplier at industry leading prices to our varied consumers.

The Leeb rebound hardness test is one of the four most used methods for testing metal hardness. This portable method is mainly used for testing sufficiently large workpieces (mainly above 1 kg) HARDMASTER: +-0.8% at LD=900, 200-900HLD 130: +-10HLD, 170-960HLD MI 970: +-0.8% at LD=970, 170-970HLD

Used for determination of the modulus of rupture (MOR) of dried or fired refractory shapes of all types Note 3 KVR servo controlled stabilizer is recommended Optional Accessories   Standard PC Software to log and modify the series of results for future provisions Closed loop programmable servo mechanism with position feedback (encoder) system Key Features   Electro-Mechanical Design Quite and vibration free operation Standard Digital Model with Load Cell and LCD Display Programmable rate of loading Auto stop and Auto reverse upon breaking of the sample Selectable test units – KG / KN Special acrylic guard to protect the user against ceramic sprinkles Maximum load Capacity : 1000 kgf Least Count : 1.0 Kgf Fire brick size of : 230 mm length x 115 mm width x 76 mm thickness cane be tested Operation on : 230 Volts, 50 Hz, Single Phase, AC Supply

Selectable units of measurement like Kilopond (kp), Newton (N), Pound (lb or lbm), Strong Cobb (SC), Statistical Data for the Maximum, Minimum & Mean Values are printed for the Tablet Tested at the End of the Test IQOQ Documents.

Used for determination of Kinematic and intrinsic viscosity of fuels, lubricants & petrochem raw materials at constant temperatures in accordance with ASTM D 445 and other equivalent methods. Available in two versions, to work at above ambient temperature and below ambient temperature. General Descripation & Specifications : Double walled, outer chamber made of G.I. - powder coated, with removable toughened Glass window panel, inner chamber made of S. S, FHP motorised stirrer for uniform temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT-100 sensor. Temperature range from 5° C above ambient to 100° C., Control accuracy ± 0.1°C. Below ambient Viscosity Baths are fitted with Refrigeration system (Temperature Range : 10°C to 100°C). The Baths can accommodate 2 / 4 / 8 Viscometers with varying tank volumes. Stainless steel bath Temperature controller (Thermostatic/Digital) Immersion electric heater Constant speed Pump cum stirrer Carriage holding up to three standard briquette moulds Electric motor with gear mechanism Stainless steel scale and pointer Control Panel Reverse Flow Viscometer The viscometer is made of clear borosilicate glass free from visible defects. All glass tubing used in the construction of a single viscometer is of the same composition and the finished instrument is thoroughly annealed. The design and details of the viscometer are given at side. The size, approximate constant and Kinematic Viscosity is as per table. Cannon Fenske Viscometer For opaque and transparent liquids : detailed drawings of the reverse flow ‘Cannon-Fenske’ viscometer is given in the figure. The size, approximate constant and kinematic viscosity range, is given in the table.

Due to our unequaled and effectual method of delivery, we have ascended as talented supplier in the marketplaces of Ahmedabad(India) In our spacious warehouse, we store the entire lot under safe environment ensuring zero damage to the products. Moreover, we have hired experts to keep a check on the same. We make available, Digital Portable Hardness Tester, which is appreciated for its high-performance and durability.  

100% hardness certification with virtually invisible indent. Any size of casting can be checked and certified.  

Digital mould hardness tester is used to test hardness of prepared sand mould. It consists of digital indicator and special geometry plunger to read hardness of green mould from 0 to 100 nos. Precautions: keep the instrument clean and away from dust ensure that all sticking sand is removed from the instrument before and after every test. Do not tamper with the setting and calibration

Our range of micro hardness tester are imported from Japan and are ideally suited to the measurement of thin hard coatings, thick soft coatings and bulk materials. It provides accurate and reproducible values for materials hardness and elastic moduli. Our hardness tester are also available with image analysis systems. The specifications of our micro hardness tester are as follows:  Measuring range is 5-3000HV Test force is 0.09807, 0.2452, 0.4904, 0.9807, 1.961, 2.942, 4.904, 9.807N (10, 25, 50, 100, 200, 300, 500, 1000gf) Magnifications of the measuring system is of 500X, 125X Min. scale value of measuring microscope is 0.025im Max. height of test piece is 75mm Depth of throat is 100mm Required power supply is 220V AC Available in dimensions 340 x 160 x 375mm Its weight is approx. 40kg

We are offering tablet hardness tester (monsanto type). A fairly handy instrument for taking quick readings for the hardness of tablets. It is made of brass turned parts, heavily chrome plated, the scale is 0 to 20kg and the index mark and division is in 1 kg reading. Scale adjustable for zero setting as per size of the tablets.

Vickers Hardness Tester, Portable Metal Hardness Teste

Metal Hardness Tester