Automotive Jacks Dealers in Ahmedabad

With the support of our outstanding storage facility, we are able to keep the entire lot away from diverse damaging factors like moisture, sunlight, dust, rain and others. Purchasers can place wholesale or retail orders with any time of the year and expect timely arrival of deliveries. Features: Finest material Rugged built Corrosion resistant

Capacity : 10 Tonne, 20 Tonne, 25, Tonne, 50 Tonne, 100 Tonne, 150 Tonne and 200 Tonne. Hand Operated : Hydraulic Jacks are of multipurpose utility i.e. application of loads while engaged in field investigation, determination of load carrying capacity of piles in the field, tensioning of wires in pre-cast structures, loading of members of any structures for deformation characteristics. For applying loads for various test in field or laboratory. Hydraulic Jack hand operated with separate pumping units. These jacks are portable available in various capacities. The pumping unit is connected to the hydraulic jack by means of a flexible connecting pipe 2 meter long. The jack is fitted with lifting handles for easy transportation. The approximate lift of the ram is 90 to 120 mm. The pumping unit is a single plunger type with detachable handle. The unit is fixed on a channeled base which is fitted with lifting handles. A pressure release valve is provided on the pumping unit. The load is indicated on a 15 cm dial hydraulic pressure gauge of appropriate capacity which can be detached from the pump when not in use. The least count of the calibrated dial will be according to the capacity of the gauge (Normally 100 divisions for full capacity). Lift of ram - 150 mm.

Base Jack /Adjustable Base Jacks / Base Plate   We are Supplying on Rental / Hirer to our clients can avail from us superior quality Base Jack /Adjustable Base Jacks used for Height Adjustment from floor bottom supporting and also used for Support Un-even Ground Level and Distribute load Spread on floor. Base Jack Adjustment for slab & beams, formwork wall Support, It has a jack nut which provides for accurate Height adjustment for final distance cover the end final Adjustable and its made from 32 mm solid rod & 6 “ x 6” & 5 mm Thick Plate.   Base jack / Adjustable Base Jack insert bottom Of on Cup lock Vertical, Scaffolding Pipe & Height Adjust with The Help of Nut Up – Down on Threaded Rod & Final Setting Achieved.   *We provide all our products and services on rent, we are rental service providers. Base – Jack Is Also Known By Following Names Adjustable Jack Stirrup Jack M S Jack

We are Supplying on Rental / Hirer to our clients can avail from us superior quality Base Jack /Adjustable Base Jacks used for Height Adjustment from floor bottom supporting and also used for Support Un-even Ground Level and Distribute load Spread on floor. Base Jack Adjustment for slab & beams, formwork wall Support, It has a jack nut which provides for accurate Height adjustment for final distance cover the end final Adjustable and its made from 32 mm solid rod & 6 “ x 6” & 5 mm Thick Plate.Base jack / Adjustable Base Jack insert bottom Of on Cup lock Vertical, Scaffolding Pipe & Height Adjust with The Help of Nut Up – Down on Threaded Rod & Final Setting Achieved.*We provide all our products and services on rent, we are rental service providers. Adjustable Jack Stirrup Jack M S Jack

Hand Operated : Hydraulic Jacks are of multipurpose utility i.e. application of loads while engaged in field investigation, determination of load carrying capacity of piles in the field, tensioning of wires in pre-cast structures, loading of members of any structures for deformation characteristics. For applying loads for various test in field or laboratory. Hydraulic Jack hand operated with separate pumping units. These jacks are portable available in various capacities. The pumping unit is connected to the hydraulic jack by means of a flexible connecting pipe 2 meter long. The jack is fitted with lifting handles for easy transportation. The approximate lift of the ram is 90 to 120 mm. The pumping unit is a single plunger type with detachable handle. The unit is fixed on a channeled base which is fitted with lifting handles. A pressure release valve is provided on the pumping unit. The load is indicated on a 15 cm dial hydraulic pressure gauge of appropriate capacity which can be detached from the pump when not in use. The least count of the calibrated dial will be according to the capacity of the gauge (Normally 100 divisions for full capacity). Lift of ram - 150 mm.

Series - sj used for the accurate levelling of surface plates, machines and other precision instruments. Supplied in set of 3 pieces with 1 handle model nominal height (mm) max height (mm) load bearing capacity (kgs.) net weight (kgs.) sj-1 55 80 400 1.23 sj-2 80 105 400 2.60

Available in a broad range of options, Adjustable Props offered feature latest technology support these find extensive demand because of their superior tensile strength as well as dimensional accuracy. Available in different finish sizes, these props provide working as heavy load support system and also allow fine adjustment using screw jacks. The rating of the prop can also be enhanced using adequate bracing support provided at intermediate points so as to perfectly match up with the specific work requirements of the customer.To meet the various requirements of the customers, we are involved in offering a wide assortment of Adjustable Prop Jack.Features:• Rigid design• Long life• Abrasion resistance

We are engaged in providing durable Laboratory Jack to the clients. Manufactured using stainless steel, MS steel and aluminum, Laboratory Jack that we manufacture, export and supply is high on demand in the national as well as global markets. Compact design, light weight, highly stable and longer service life are some of the qualitative features of Laboratory Jack that we offer. With such attributes, the cost-effectiveness of the Laboratory Jack helps assuring maximum satisfaction of the clients. Specifications : Adjustable height : 2-1/2" to 10" (64mm to 254mm)Ability to bear load up to 45.4 kgUnit made of aluminum top and bottom plates with a baked-enamel finish and plated steel cross membersHeight adjustments through threaded rod joined with a large serrated knob Sizes Available : 6" x 5" top plate8" x 8" top plate10" x 10" top plate