Automotive Jacks Dealers in Mumbai

automotive and heavy duty lifting equipment, which is manufactured in Taiwan. The BP225 offers chrome-plated rams, improved bearing surfaces, high-cycle durability, long-life seals and high- and low-temperature functionality. The BP225 features a minimum height of 9.15″ and reaches full height at 22″ with one of its four extensions. This tool is powered by a high-speed turbo air motor and equipped with built-in bypass protection to prevent over pumping damage. The BP225 also is guaranteed with the lifetime manufacturer’s defect warranty and five-year usage warranty with online registration.

Item Code: GP-01Light Metal General Purpose Jack - Plain Ram, Single Acting, Spring ReturnFeatures :-Almost half the weight of steel jack same specifications.Composite bearings as guide avoid metal to metal contactInhibits corrosion resistance.Application :-Standard Multi purpose jacksGuide rings at piston and gland nut facilitate to use in all directions when centrally loadedBase mounting holes are optionalSpecifications :-Capacity - 20 ton to 200 tonStroke - 150 mm

We are offering strand jacks. Single strand jacks up to 25 ton capacity using 18mm diameter h.t. Strands are manufactured by bygging. These jacks find use in lifting of steel flues for chimneys, and to lift horizontal tanks, vessels and de-aerators. Multistrand jacks upto 180 ton lifting capacity are used for boiler drum lifts.

Kabitaa tech has provided the design support, supply of tank jacking system  and specialist services for lifting a 65 m dia tank for total demolition and casting new ring beam foundation for 65 m dia tank in saudi arabian chevron-kuwait site.

is suitable for general engineering applications. Body made of heavy duty, graded cast iron, screw made of steel, threads are machine cut - square threads. The main screw and head are both tempered to avoid undue wear and tear in handling. The jack is available in both - Plain four way head (Tommy bar operated) and Ratchet head type. The jack head has quality finish and workmanship guaranteed against manufacturing defects and is designed to carry an overload of 25%.

Sizes : 1/4" To 3/8" NPT, Working Pressure : UP To 750 Bar Material : Carbon Steel Application : High Pressure Jacks 

Mumbai Tattoo, Tattoo studio in mumbai, tattoo ink supply, tattoo artist mumbai, tattoo course in mumbai, tattoo machine, Tattoo studio in mumbai, buy tattoo machine, tattoo wholesale supplies, tattoo equipments, Tattoo studio, tattoos equipment in mumbai, tattoo ink supplier in india, Stingray Tattoo Machine, tattoo machines, tattoo gun kits, tattoo gun machine, tattoo gun in mumbai, tattoo wholesale supplies, professional tattoo guns, professional tattoo machines, tattoo machines, tattoos equipment in mumbai, tattoo machine wholesale, professional tattoo kit, Tattoos supplies   katana Iwork Premium Jack Clip Cord Extremely lightweight quality cables Clip Cord Length: 6 Feet Connection: 1/4“ Jack mono plug

We are counted amongst the reputed manufacturers, exporters and suppliers of the premium range of Industrial Hydraulic Jacks that are available in various technical specifications to suit to the diverse needs of the customers. Made using the best grade raw materials, our Industrial Hydraulic Jacks assure high performance and reliable results. Features Medium carbon forged rammedGround and hard chrome platedHas non tie rod constructionRigidEasy maintenance Specifications Capacity : 1 ton to 2500 tonStroke (mm) : 50 to 6000 mm Materials of Construction ForgedCast steelPipe seamless boredMicro-honed Packaging Fabric reinforced nitrile rubberPolyurethane seal packing Applications Machine toolsConstruction equipmentEarth moving equipmentSpace applications

Thomson's worm gear screw jacks MULI® and JUMBO® set new engineering standards for precision and reliability.  Designed with state-of-the-art CAD and CAE systems and adhering to stringent manufacturing requirements, these screw jacks meet all the necessary safety, cost-efficiency, and durability mandates of your application.  Large projects can be realized at short notice thanks to the use of preassembled modules.  These modules can be customized to your application's specifications. Above all, the heart of every MULI and JUMBO screw jack is a precision trapezoidal or ball screw drive of superb quality from Thomson's own screw production. In general, there are two considerations with worm gear screw jacks:  Trapezoidal screw for rough conditions and good price/performance ratio Ball screw for long duty cycle, high efficiency, and high positioning accuracy

Purchasers can rely on us to make on time distribution of orders, as we have cooperated with established transportation facility providers. One of the major concerns of the organization is to make available only quality approved products to the buyers and thus we check the entire range at all stages.

The non-skid space-age reinforced inflatable jack is perfect for many applications. Highly flexible and lightweight jacks only require an air supply of 116 psi maximum. Any non-explosive gas or water can also be used for inflation. Uninflated jacks are only 1" thick, making seemingly impossible lifting tasks routine. Space-age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 175 psi. In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 116 psi. Large surface area and material flexibility allow jacks to lift loads on soft or compressible surfaces without support cribbing being necessary. Safety first! The controller, shut-off and air hoses are all equipped with USA industrial interchange style air couplers. Female half coupler bodies have a locking collar, protecting operator from accidentally disconnecting jack while under load. Surface of jack has a non-skid pattern, assuring that the jack won’t “walk away” from the job. Jacks can be used to lift a load from an uneven surface, are tolerant of side-loaded applications. Non-conducting material resists oil, ozone and most chemicals. Cold resistant down to -40° F, heat resistant up to 240° F (short term) or 200° F (long term). Field-replaceable nipples are made of tough steel, with internal thread to prevent abrasion damage. Ideal needle aperture of 1/4" allows rapid inflation, without risk of icing, and permits a safe lowering speed. Single jack controller with “dead man” control (350090). Can be used individually, or in multiples to regulate any number of jacks desired. Heavy attachment straps are provided on 4 largest sizes for attachment of a rope or hook to position the jack from a safe distance. Inflation hose system is color-coded (red and yellow) for easy recognition when using more than one jack. BE SAFE! INSPECT BEFORE AND AFTER EACH USE. REPLACE IF ANY SIGNS OF DEGRADATION OR WEAR THAT MAY AFFECT SAFETY OR PERFORMANCE. KEEP THE PRODUCT CLEAN. STORE PROPERLY.

Equipment: Single Pull Systems Wire Type – Hydraulic Jack Killick wire Jacks are available in 7 ton capacity, with extension of 250 or 500 mm. They can be operated with a hand or electric pump. They are used for both pre and post stressing. Strand Type – Hydraulic Jack Killick strand jacks are available in 2 models: - Mk III back gripping strand jack with 18 ton capacity and 250 mm stroke J-20 front gripping strand jack with 20 ton capacity and 190 mm stroke. This is also known as strand saver jack. Multi-Pull systems Killicks Multi Pull systems are comprised of  7T13 / 12T13 / 19T13 / 31T13 and  7T15 / 12T15 / 19T15 31T15 anchorage systems, with the matching jacks, pumps, and complete accessories.   Hydraulic Power Pack Available in manually operated and power operated versions for powering hydraulic jacks and other hydraulic equipment.   Motorised Grout Agitator For effective grouting, it is essential that the grout should be agitated continuously in a drum of required capacity. Agitation helps to obtain a colloidal grout before pumping. Killick manufactures agitators for this purpose with stainless steel impellers mounted on a stainless steel shaft, powered by a 1500 RPM, 2 H. P. motor.   Grout Pumps These are used to grout cable ducts in pre-stressed concrete members and for repair and waterproofing of concrete. Killicks grout pumps are available in three models - Standard, High pressure and Electrically-operated.