Lubricants Dealers in Ahmedabad

Description : E.P. LUBE is a High temperature Oil Based Extreme Pressure Lubricant. It is used in all types of Mud systems it reduces torque and drag, provides high temperature stability and reduces friction ladingto reduced corrosion. It does not affect rheology or gel strength and does not give foaming effect. It also provides high temperature stability.

Valve lubricants protection of leaded gasoline, especially those now running on low or unleaded gasoline. Without Omega 991, your car may suffer severe exhaust valve recession, leading to premature engine failure.

Refrigeration systems incorporate many components found individually in various mechanical systems into a single system. All systems incorporate some type of compressor with moving parts requiring lubrication. The demands on lubricants in this type of environment are fairly severe with constant change from the high heat load in the compressor and evaporator to rapid cooling in the condenser. Specialized refrigeration lubricants must be sourced that meet the needs of modern refrigerants with most applications requiring a synthetic refrigeration lubricant.   Refrigeration units are closed loop systems with the oil introduced in the compressor being mixed with the refrigerant. The piping system is designed to return the lubricant and refrigerant back to the compressor. For this to be achieved efficiently, the lubricant selected must have a high miscibility with the refrigerant. This interaction between the lubricant and refrigerant can impact the film forming characteristics of the lubricant on surfaces used for heat transfer. This can affect the overall efficiency of the system as well as reduce lubricant available for friction bearing surfaces in the compressor where it is most needed.   With the shift from chlorofluorocarbon (CFC) refrigerants to hydrofluorocarbon (HFC) refrigerants, mineral oil based lubricants are no longer acceptable. Modern synthetic blends are formulated from bases of polyalkylene glycol (PAG), polyol ester (POE), and alkyl benzene (AB). Systems that use ammonia as a refrigerant are typically compatible with PAG type lubricants where HFC refrigerants of various types use a variety of lubricants.   PAG and POE type oils tend to collect water and break down with incorporated moisture. These oils will contain additives such as hydrolysis stabilizers and antioxidants that help to reduce problems from incorporated moisture. These lubricants will also contain additives that prevent foaming as the solution moves through the system with the refrigerant experiencing gas to liquid phase changes along the way.   Finding the balance for providing proper lubrication, maintaining fluid seals in the compressor chamber, providing cooling to compressor components and for not interfering with the overall efficiency of the refrigerant is a complex task for a formulator of refrigeration lubricants. Maintaining refrigeration systems for optimal functionality requires high quality lubricants. The effective application of chemistry, testing and experience, has provided solutions to all of these challenges which are available in the wide range of refrigeration lubricants offered.

Sewing Thread Lubricants, Simethicone Emulsion, Heavy Vehicle

Aluminum pressure die-casting. Provides excellent release for complex moulds with bright surface finish. Longer plunger life due to specific base oils having residual lubrication properties. Performs as coating that minimizes wear and tear of plunger.

Automotive Oils is a substance introduced to reduce friction between moving surfaces. It may also have the function of transporting foreign particles. The property of reducing friction is known as lubricity. Typically lubricants contain 90% base oil (most often petroleum fractions, called mineral oils) and less than 10% additives.Our Export unit for Automotive Oil and Lubricants is most advanced in India. We have dedicated staff for export which ensure smooth and on time delivery to any part of the world. As we mentioned that from last three financial years we are constantly winning the award of best Automotive Oil and Lubricants exporter from India. Our approach for export is very simple and clear, supply best product with most competitive international price.

  Key Features  Special synthetic lubricants for high temperature applications KRYTOX GPL-227 is PFPE based polymer composed of fluorine, oxygen, and carbon It is a synthetic lubricant specially formulated for extremely high temperature applications Will not burn or support combustion, even in 100% liquid or gaseous oxygen Chemically and biologically inert and silicone-free Insoluble in most solvents but soluble in highly fluorinated fluids and some super critical fluids such as CO2 Does not contain any volatile organic compound (VOC) materials or chlorine

Fabol FRT is a breakthrough technology of lubricants! Once added to the oil in your vehicle /machine it adds life to your engine! increases mileage and reduces friction wear & tear and results in numerous benefits!  

Rubber lubricant is a water- soluble non-cure, & non-hard film, pasty product. It gives more lubricity than other products like soap, suds and kerosene on rubber or elastomeric elements after evaporation. It also improves the productivity of automated assembly machine. Rubber lubricant reduces the standing and sliding fraction. Rubber lubricant prevents the installation damage to the sealing device, e.g. galling, cutting, nicking, roll over or tearing etc; Rubber lubricant does not react with rubber parts, and metal parts. It also not swells the rubber parts, thus it not degrades the physical properties of the rubber. Rubber lubricant acts as corrosion inhibitor for metal parts so it helps in increasing the life of non rubber parts.

Veritol marine oil is a superstar performance heavy duty diesel engine oil formulated with high quality base oil specially selected additives to provide a very high TBN. ideal for diesel engines incredible engine life and longer oil drain interval.

We are looked upon as one of the preeminent Molygraf Lubricants Suppliers in India. The unmatched quality and unsurpassable performance has attracted various national as well as international clients to place orders for Molygraf Lubricants. The use of optimum quality raw materials in the manufacturing of the Molygraf Speciality Lubricants ensures high lubrication with reduction in the possibilities of friction. Additionally, customers are eased with the availability of the Molygraf Lubricants packed hygienically preventing contact from external contaminants and harsh environmental conditions. Click Here For Detail

FAITH offers one of the finest range of One Pack Lubricants "PolyPerse" made from the best of the feedstock available in the international market. PolyPerse also has various feedstocks which are manufactured in house which ensures total quality control and consistent standards.

AIROCOMP™ offers quality lubricants for screw compressors. Perfect lubrication means higher performance and less costs. Nearly all compressors require lubrication to either cool, seal or lubricate internal components as the rotor, piston or cylinder. It is very important to use quality lubricants to avoid all unexpected and high maintenance costs. We offer a vide range of high-performance lubricants to suit different needs and applications. Key benefits: Oils according to ASTM standards Oils according to ASTM standards & ISO grade Extended oil change / drain intervals Perfect lubrication of all components Energy efficient Protection against corrosion Better cooling of the compression process Eliminates deposit formation Better heat transfer Increased performance   Technical Data Sheet: AIRO FOODGRADE AIRO H PLUS AIRO R COMPRESSOR OIL AIRO S COMPRESSOR OIL AIRO SULL COMPRESSOR OIL AIRO ULTRA COMPRESSOR OIL AIRO X COMPRESSOR OIL AIRO Z COMPRESSOR OIL ECONOMY COMPRESSOR OIL

finest range of One Pack Lubricants PolyPerse for PVC processing.it is made from best of the feedstocks available in the international market. With the use of PolyPerse range of One Pack Lubricants all other internal and external lubricants such as Polyethylene Wax, Hydrocarbon Wax, Calcium Stearate , Paraffin Wax, Stearic Acid , GMS etc. gets eliminated during PVC compounding.This is a new generation PVC Lubricant wit

Eni has a long history in the marine sector. Thanks to its technological know-how, a dedicated range of Eni Marine products is available for each type of units: small outboards, recreational boats, yachts, inland barges, fishery units but also bigger vessels running on less refined fuels. The product range includes technologically advanced lubricants: cylinder oils, system oils, transmission oils, hydraulic oils, greases and other fluids for on-board auxiliary machinery.All Eni Marine products have also been developped paying a particular attention to environmental compatibility.