Lubricants Dealers in Chennai

Housing and bearing units have successfully been used in machinery, installations and equipment. Selection from the wide spectrum of types and sizes manufactured. If other housing types or design variations are required, we should be consulted. Bearing housings are usually made of greycast iron. Housings of cast steel and spheroidal cast iron are available on request. As the bearings are usually lubricated with grease, and the initial grease fill will last for a long time, most housings can do without lubricating holes. They featurecast-on flat bosses or markings allowing lubricating holes to be drilled if needed. In the case of relubrication, escape of the surplus grease must be ensured.As a rule, the bearing seats in the housings are machined in such a way that the bearings can be displaced, i.e. they are of the floating type. Locating bearing mountings are obtained by inserting the locating rings listed in the tables. Locating rings have to be indicated separately in the order. Housings without locating rings are supplied either as floating bearing housings or as locating bearing housings. All outer surfaces which are not machined are provided with a universal coat of paint. The coat of paint can be finished with all synthetic resin, polyurethane, acrylic, epoxy resin, chorine rubber, cellulose and acid-hardening hammer dimple enamels. Depending on the operating conditions, the bearing housings can be sealed with rubbing seals, non-rubbing seals, and combinations of both, see illustrations below

Our organization plays an important role in offering Bituminous Lubrication to our clients. Offered range is produced in seamless manner for added safety. This is manufactured keeping in mind highest industry standards. This is perfect for use on galvanized ropes. It is available in different diameters and is highly preferred on account of its quality and texture. Features: • Sturdy design • Perfect finishing • Rust free

Metalworking, one of the most important industry segments, is known for its continuous improvement of the production process. The ever increasing demand for high quality products requires a constant and flexible automation of the metalworking processes and introduction of numerically controlled machines as well as new materials for tools and fluids for cooling. All these developments have led to faster machines, higher permissible cutting temperatures and faster cutting speeds. Metalworking industry uses huge quantity of cooling fluids and the health aspects of working with these fluids are as important as the need for tools and metal cutting fluids to have a long service life.

Turbolube LP Lubricant Chemicals, Turbowax 81 Wax Emulsion Leather Chemical

We bring forth for our clients a widespread range of Industrial Lubricants that is widely used for varied applications in different sectors. Formulated using quality components and additives, these lubricants strictly adhere to the prescribed industry standards. Our team works with diligence and dedication to ensure that the lubricants processed under their vigilance possess superior functionality.

Kluber ISOFLEX NB 15 AND 52 is a lubricating grease with a wide service temperature range for plain and rolling bearings. Grease is designed for long term lubrication of ball and roller bearings and plain bearings.

Our organisation is widely recognised for its ability to offer industrial oil of best quality and range to our clients. Free from all types of defects; oil is resistant to more.

CASTROL Industrial Range Of Products Gear Oils Hydraulic Oils Machine and Slideways Oils Compressor Oils Gas engine oils Turbine Oils Chain Engine Oils Greases High Performance Multi Purpose Greases High Temperature Greases Lifetime Greases

Premium grade friction reducer cum emulsifier. Ideal for dye bath lubrication of heavy GSM fabrics.  Excellent emulsifier with anti crease properties.   Prevents rope and chafe marks, creasing and abrasion.   Suitable for natural, synthetic fibres and their blends.   Enhances heat setting efficiency.   Improves stain removal after heat setting.   Suitable for scour-dyeing of 100% polyester. Turbolube AC can be applied in pre-treatment and dyeing stages. It is suitable for all types of equipment like jet and package dyeing machines and drum washing machines for garment processing.   Turbolube AC can be applied for scour-dyeing of 100% polyester.

We are one of the leading suppliers of industrial lubricants used in construction and hydraulic industries which helps in the efficient running of machinery. Some of the lubricants supplied by us are includes cutting oil, grease oil, transformer oil etc. These are known for their reliability and competitive prices.

1. TWO STROKE ENGINE OILS Purerol 2T Oil This oil is recommended for lubrication of all types of two stroke engines fitted on scooters, mopeds and 3 wheelers. 2. FOUR STROKE ENGINE OILS MULTI GRADE ENGINE OILS Purerol 5W 30(API SL) , 10W 30(API SL) , 10W 40(API CJ4), Super 20W-40(API SL), Super 20W -50(API CJ4), Super Plus 20W -40(API CJ4) , Super 15W-40(API CJ4) , 15W-40( API CF4) PUREROL PASSENGER CAR MOTOR OILS (API SL) are designed to provide improved high temperature deposit protection for pistons and turbochargers, more stringent sludge control, improved fuel economy, enhanced emission control system compatibility, seal compatibility, and protection of engines. PUREROL DIESEL ENGINE OILS (API CJ4) are especially designed for high-speed four-stroke engines, to meet 2007 on-highway exhaust emission standards. It is compounded for use in all applications with diesel fuels ranging in sulphur content up to 500ppm (0.05%) by weight. MONOGRADE ENGINE OILS Purerol Super 10W , 30 , 40 It is designed for older & classic engines with premier mineral base oils and modern additives to provide outstanding protection in diesel & petrol engines. It meets API SL/CJ4 performance standards. AUTO TRANSMISSION FLUID Purerol ATF C4 SAE 10 , C4 SAE 30 This product is used in automatic transmissions of all commercial power shift transmissions, industrial torque convertors and automatic transmissions. The product has excellent oxidation, rust and corrosion protection, better foam resistance and low pour point. PUREROL FRONT FORK OIL Front Fork Oil is specially developed for application in front fork assemblies of two wheelers and is recommended for use in the front fork shock assembly of motorcycles PUREROL SHOCK ABSORBER OIL It is designed with excellent damping effect, & it is suitable for hydraulic shock absorber of automobiles under various severe conditions. PUREROL AUTO GEAR OIL Purerol Gear EP 90(GL-5) , Gear EP 140(GL-5) These oils are recommended for gear applications requiring lubricants meeting U.S. MIL-L-2105D, CS: 3000 B, API GL-5 performance level, particularly suitable where loading is severe and maximum gear protection is required. These oils are recommended for bevel, spiral bevel and hypoid gear differentials, for synchromesh & constant mesh transfer cases, oil luricated universal joints and manually operated steering gears.

MolithGrease, VI IMprover, Compressor oils, Sugarmill Roll oils, Sugar mil compound oils, EP Grease, Graphite grease, Jupitol knit lubes, Fire resistant hydraulic fluids etc..

EXTREME PRESSURE LUBRICANT Prevents the build-up of frictional heat on metal surfaces DESIGNED TO BE APPLIED TO BAND SAW BLADES AND OTHER CUTTING TOOLS Improves overall tool life and productivity when sawing, drilling, milling,grinding, threading or tapping CAN BE USED ON FERROUS AND NON-FERROUS METALS,ALUMINUM GATES AND RISERS, PLATES AND EXTRUSIONSBIODEGRADABLE, NON-TOXIC AND NON-STAINING

Sealol range of Marine Lubricants are for use in Marine engines, Compressors, Lubricating and Circulating systems. Our products are formulated to achieve optimum efficiency, performance in the systems.

Chemoleums Turbo GL-5 Oils are high performance, multipurpose EP gear lubricants for differentials, manual transmissions and other gear cases of automotive equipments. These oils are currently available in SAE 80W-90, SAE 85W-140viscosity range. Chemoleums Turbo GL-5 Oils are recommended for gear applications requiring oils meeting API Service GL-5 or where loading is severe and maximum gear protection is required. These can be used for top-up of Limited-slip differentials after break-in of new or rebuilt units.

lube oil We serve the bunkering need of all sectors of marine market-merchants, vessels, ocean-going yachts and cruise ships, oil tankers and fishing fleets. We are suppliers of marine fuel lubricants, serving all the ports of India. Our work be