Screw Compressors Dealers in Ahmedabad

Rotary Screw 7.5 To 270 HP Lubricated Main part of Screw Compressor is Air-end, consisting of a pair of rotors. The male motor is driven by electric motor. Suction of air though Inlet filter and suction control valve. Air – oil mixture from air-end flows into an air – oil separator. The separated oil flows through oil filter and after cooling in 'cooler', it gets back into the system. The air also passes through air cooler and to the receiver. The whole system is controlled through valves / sequence of compressor is done through electric /electronic control.

  KPCL Oil Injected Electric Skid / Tank Mounted Screw Compressors are the results of technical expertise and experience of over five decades in design, manufacturing, supply & installation of air & gas compressors of various designs, capacities & pressures for varieties of applications. We manufacture these compressors in Skid Mounted Category with named KES 15 to KES 55 (R2 - R3 range) & KES 55 to KES 160 (R4 - R5 range) & in Tank Mounted category with named as KES 7 to KES 11, with the pressure ranging from 7.5 kg/cm²g to 13 kg/cm²g & capacity from 1.87 m³/min to 31.15 m³/min. Salient Features: Ready to use: No foundation is required. Quality Air: Efficient air / oil separation system ensures maximum oil recovery to minimise lub oil consumption and maintenance cost. Canopy: Specially designed silent canopy to facilitate effective ventilation and ease of maintenance. Controller: Microprocessor based efficient controller with necessary safety control systems and maintenance schedule. Cooling System: Radiator type aluminum combi cooler with low noise fan & motor provided for effective cooling of lub oil and compessed air. Control Panel: In built control panel housing MMI, µ controller, main motor auto star - delta starter, fan motor direct on-line starter & other control of the package. Air suction filter: Dry type air filter protects the air end and ensures long life. Electric Motor: Highly efficient, TEFC, Class F insulation, Foot cum Flange mounting, 4/2P, EFFI, IP55 protection motor is selected considering operating conditions at site. Service Centres: Fully equipped Service Centres with trained engineers and spare parts stocks available across the country.

KE 30-50 are innovative, oil injected Electrical Portable screw compressor. This single axle compressor is powered by a three phase TEFC squirrel cage motor with class F insulation and are suitable for varied application in Mining & construction industries. These compressors can be used for operating different tools like Rock Drills, Demolition Tools, Chipping Hammers, Rammpers/Tampers. Impact Wrenches, Grinding Tools & for Sand Blasting too. FEATURES World Class Air End  Low rotor speed, few moving parts & efficient design of compressor minimises wear & tear, ensuring reliability and long working life  Clean Intake Air High performance two-stage air intake filter prevents dust & dirt particles from entering the compressor Ease of Operation All the controls are grouped on a single panel for easy monitoring, safety and fool-proof operation Regulation  Auto Load/Unload regulation of the compressor can be done between set pressure limits Service Valves  The compressor is provided with adequate service valves Easy Access  The canopy doors open outwards providing easy access to the machine. With doors up and out of the way, routine maintenance can be performed in less time Operating Economy  You can count on economical Electric consumption and continuous airflow at stable pressure as its fully automated stepless control constantly adapts the compressor output to air demand Environment Friendly  Efficient noise dampening canopy & state-of-the-art Electric Motors that are low on Electric consumption makes our compressors environment friendly APPLICATION Blast hole drilling Line drill Water well boring Crawler drill Demolition Tools LD4 drilling Chipping Hammers Jack hammer / Rock drill Surface preparation (sand / shot / dry ice blasting) Shot creting

Oil-injected rotary screw compressors, 2-11 kW / 3-15 hp. Capacity FAD (m³/h, cfm): 14,40 - 100,10 m³/h | Working pressure: 7,50 - 13 bar(e) | Installed motor power: 2,20 - 11 kW | Capacity FAD (l/s): 4 - 27,80 l/s

During the down stroke of the piston of a two-stage compressor, air is forced into the first stage cylinder by atmospheric pressure through an inlet filter and an intake valve in the head of the compressor. When the piston reaches the bottom of the stroke, the intake valve closes. During the upstroke of the piston, the air is compressed, the discharge valve opens and the compressed air is delivered to the second stage through finned intercooler tubes where the heat created by the compressor is allowed to dissipate.The cooled compressed air is then forced into the second-stage cylinder via an intake valve. The second-stage cylinder fills with compressed air during the down stroke of the second-stage piston. During the upstroke of that piston, the air is compressed and released through a discharge valve to the air receiver tank. In one revolution of the crankshaft the complete two-stage cycle is completed.Two stage air compressor manufacturers, Two stage air compressor manufacturers India, Two stage air compressor manufacturers Ahmedabad, low pressure air compressor manufacturers, medium pressure air compressor manufacturers in Mumbai, Two Stage Compressor Manufacturer, Two Stage air Compressor Manufacturer, 2 Stage Compressor Manufacturer India