Submersible Pumps Dealers in Odhav, Ahmedabad

VEER PUMP INDUSTRIES Is Best Openwell Submersible Pump Manufacturers in Ahmedabad 0.5 HP To 3 HP Single Phase Openwell Submersible Pump & 2 HP To 15 HP Three Phase Openwell Submersible Pump

We are Manufacturer of Submersible Pumps. Range Start from 5.0hp to 25.0hp. Our Submersible Pumps are Competitive in Price and Excellent in Performance. We have Experience of Dealing with Most Demanding Clients in all Over India and Our Clients are Satisfied By Our Non Stop Working and Long Lasting Quality.

Being client centric organization, we are engaged in offering wide range of Submersible Water Pump. These Submersible Water Pump are known for their accurate dimension and perfect finishing. Also, we manufacture these Openwell Submersible Pump as per the demands and specifications given by the clients which satisfy them most.

Graphite and CARBON - Graphite rings with superior self lubricating properties and low wear. These are used in submersible pumps for lifting water from deep water bored wells. Pump parts in CARBON material with higher hardness will enhance abrasion resistance. CARBON rubbing components are widely used in high temperature applications where the presence of liquid lubricants is unaccepatance. Chemical inertness, temperature resistance, lightweight, dimensional stability, impermeability to gases and I iquids, and self-lubricating properties make mechanical grades suitable for some of the most demanding applications. These rings are mould to size or machined to close tolerances.

We are actively engaged in the manufacturing, exporting, importing and supplying of Dewatering Pump. The Dewatering Pump is less noisy and matches with the international standards. We manufacture the Dewatering Pump under strict supervision of the experts. These SDR/MDR Series Submersible Pumps are ideal for Pumping Liquids with Fine Solids, Sand or Such other liquids. Features : Portable, Fitted with electric motors, double Mechniacl Seal. Standard materials C.I./Alluminium alloy body with S.S. 304 impellers, S.S.410 shaft. Capacity : Up To 216 M3/hr. Head : Up To 40 Mtr.

If the party demand for motor protection, sensors are provided in windings which trip the circuit on reaching a preset temperature the pumps are also provided with sensing device to signal against ingress of water into the oil chamber, The impeller is directly mounted onto the extended shaft of the motor and there is no coupling in between, Double mechanical seals are provided for effective sealing of the motor from the sewage.

We are offering openwell submersible pumps. Range motor power range from 0.50 hp through 5.00 hp pump sizes from 25 x 25 mm through 100x100 mm diameter rotors in copper as well as aluminium application motor shell in ss as well as ci application features all pumps centrifugal radial flow delivery & suction sizes commensurate with discharge all motors induction type & water cooled plug-in into 200v, 50 hz, ac power through suitable control panel plug-in into 400v, 50 hz, ac power through suitable control panel.

The “VIRAJ” make “EJ/MJ/VDX” series is designed in single stage, centrifugal by A.C. squirrel cage induction motor in a fully submersible Portable Dewatering Pumps of close coupled vertical (mono-block type) construction. Portable Dewatering Pumps can be transported and installed easily and cater to varying industrial applications. Portable Dewatering Pumps are used for draining abrasive water from mines, construction sites, docks, basement dewatering, flooded areas, etc. Having superb performance and capacity, the Portable Dewatering Pumps have higher motor power and are light in weight. Design Features : These pumps are specially designed for Raw water , Rain Water , Treated ETP water with small (EJ Series – UP TO 10 MM , MJ/VDX Series - particle size (up to 35 mm)These pumps are offer with semi open type impeller (non -clog free flow type) / Channel / Close made in S.S 304 /316/C.I..These pumps are design easy to maintenance at siteThese pumps are Light Weight and Compact Design compare to othersThese pumps are equipped with double mechanical seal & ball bearing.These pumps are also available with built in thermal protection (Optional) & Moisture protection (Optional)These pumps motor are available in Dry Winding (Super Enameled) & MJ/VDX Series also available in Wet Winding (P.V.C.Wdg. Wire) Advantages of "Viraj" EJ/MJ/VDX Series : Available in both 1450 and 2900 RPM (MJ & VDX Series Only) ( EJ Series available only in 2900 rpm )Robust constructionCan work under flooded or partially submerged conditionsMotors are oil filled and oil lubricated (only in P.V.C. wound motor & In Dry motor Optional)Compact and light weightImpellers dynamically balanced & Impellers are in open / semi open / non clog designMotor cooling ensured by the liquid being pumpedImpellers in hardened steel or CF8M or as per application requirement.Reduction of construction cost.Motor has an extra overload inbuilt capacityShaft supported on two ball bearings Application Area : Water Supply SchemesConstruction SitesEffluent TreatmentWater TreatmentSteel IndustryRiver waterDewatering of mines and pitsDesilting OperationsBuilding dams, harbours and tunnels Chemical IndustryFlood water control

we offer Oil Filled Submersible Pumpset. Varuna Submersible Motors are manufactured as per IS: 8034 Standard. These sturdy and robust submersible motors are made using advanced technology.

Varuna Submersible Motors are manufactured as per IS: 8034 Standard. These sturdy and robust submersible motors are made using advanced technology. All parts are manufactured and fitted precisely using CNC machine that imparts excellent mechanical strength and reliability.   Salient Features   Induction motors are easily re-windable using multi layer PVC insulated wire for better reliability. Motor filled with water gives better cooling to winding as well as bush. Self-aligned carbon Stainless steel thrust bearing which withstands high axial thrust load in water lubrication. Electrically designed to lower power consumption and operating cost. Non-magnetic, corrosion-resistant high-grade stainless steel stator body. Water-filled motor is available in capacitor start and run design. Gun Metal bush is made with additional centrifugal molding process and 2 % Nickel is added. Superior designed Noryl impellers and diffusers give higher hydraulic performance and greater efficiency and provide higher resistance against wear and tear from sand and other impurities. Stainless steel strainer prevents particles over a certain size from entering the pump. Pumps are available with non-return valve to reduce the backpressure of water when they are switched off. Impeller and Bowl are accurately machined by CNC machine to ensure high dimension accuracy. Rubber bush and SS hard chrome sleeve increase wear-resistance against sand. Lightweight, compact and robust construction design.   Application   Sprinkler and drip irrigation Civil and industries Fire fighting system Agriculture

Our V4 submersible pumps and motors are notable for its quality, Reliability, and brilliance for all kind of administration reason. Our submersible pumps and motors are fabricated under the supervision of profoundly qualified specialized group with a phase savvy inflexible assessment system under TQM ideas. Utilization of Bore well submersible pumps are in Hospitals, Water flow frameworks, Water supply frameworks of Government, Irrigation, Farms and Drip and sprinkler water system, Gardening, Nurseries, Domestic water supply, Multi-story Building, Industries and Hotels and so forth.