Techno Enterprise Vatva, Ahmedabad, Gujarat

Type : Furnace Oil

We are offering waste tyre pyrolysis plant. We have gained expertise in manufacturing, supplying and trading optimum-grade scrap tyre recycling plant model. The components used in the fabrication process is sourced from trusted and reliable vendors of the market. Our range is available in various specifications at nominal rates. Features: high performance noise free operations rugged construction specifications: raw material : nylon radial tyre structural form : horizontal rotatio 24-hour capacity : 8.5 t oil yield [40 to 45 % oil in kg] : 3.8 ton steel scrap [15 to 20 %] : 1.7 ton carbon [30 to 35 %] : 2.5 ton operating pressure : normal ( 0.3 to 0.5 kgbar) material of reactor : b.q.plate sa 516 grade70 thickness of reactor : 14 mm rotate speed of reactor : 0.4 turnminute total power : 25kw(34 hp) mode of water cooling : circular cooling (50 tr-cooling tower) cooling area of condenser : 37 square meter kind of transmission : vfd drive noise db(a) : greater than 85 size of reactor : 2.6 x6.6 meter working form intermittent operation land requirement : 10,800 square feet(90 x 120 feet) delivery time : within 2 weeks installation time : 10 to 15 days

We are offering waste tyre pyrolysis plant. We have gained expertise in manufacturing, supplying and trading optimum-grade scrap tyre recycling plant model. The components used in the fabrication process is sourced from trusted and reliable vendors of the market. Our range is available in various specifications at nominal rates. Features: high performance noise free operations rugged construction specifications: raw material : nylon radial tyre structural form : horizontal rotatio 24-hour capacity : 8.5 t oil yield [40 to 45 % oil in kg] : 3.8 ton steel scrap [15 to 20 %] : 1.7 ton carbon [30 to 35 %] : 2.5 ton operating pressure : normal ( 0.3 to 0.5 kgbar) material of reactor : b.q.plate sa 516 grade70 thickness of reactor : 14 mm rotate speed of reactor : 0.4 turnminute total power : 25kw(34 hp) mode of water cooling : circular cooling (50 tr-cooling tower) cooling area of condenser : 37 square meter kind of transmission : vfd drive noise db(a) : â�¤85 size of reactor(dã�l) : 2.6 ã� 6.6 meter working form intermittent operation land requirement : 10,800 square feet(90 x 120 feet) delivery time : within 2 weeks installation time : 10 to 15 days

We are offering waste tyre pyrolysis machine. We have gained expertise in manufacturing, supplying and trading optimum-grade scrap tyre recycling plant model. The components used in the fabrication process is sourced from trusted and reliable vendors of the market. Our range is available in various specifications at nominal rates. Features: high performance noise free operations rugged construction specifications: raw material : nylon radial tyre structural form : horizontal rotatio 24-hour capacity : 8.5 t oil yield [40 to 45 % oil in kg] : 3.8 ton steel scrap [15 to 20 %] : 1.7 ton carbon [30 to 35 %] : 2.5 ton operating pressure : normal ( 0.3 to 0.5 kgbar) material of reactor : b.q.plate sa 516 grade70 thickness of reactor : 14 mm rotate speed of reactor : 0.4 turnminute total power : 25kw(34 hp) mode of water cooling : circular cooling (50 tr-cooling tower) cooling area of condenser : 37 square meter kind of transmission : vfd drive noise db(a) : greater than 85 size of reactor(dã�l) : 2.6 x 6.6 meter working form intermittent operation land requirement : 10,800 square feet(90 x 120 feet) delivery time : within 2 weeks installation time : 10 to 15 days

Turmeric grows wild in the forests of South and Southeast Asia. It is one of the key ingredients in many Asian dishes. Indian traditional medicine, called Siddha, has recommended turmeric for medicine. Its use as a coloring agent is not of primary value in South Asian cuisine. Turmeric is mostly used in savory dishes, but is used in some sweet dishes, such as the cake sfouf. In India, turmeric plant leaf is used to prepare special sweet dishes. In recipes outside South Asia, turmeric is sometimes used as an agent to impart a rich, custard-like yellow color. It is used in canned beverages, baked products, dairy products, ice cream, yogurt, yellow cakes, orange juice, biscuits, popcorn color, cereals, sauces, gelatins, etc. It is a significant ingredient in most commercial curry powders. Belt Conveyors ( Material Handling) Rotary Screen (Cleaning Machine) Impect Pulverizers (Grinding Machine) Screw Conveyors (Material Handling) Storage Silos Ribbon Blenders (Mixing & Polishing Machine) Gyro ScreenVibrating Machine (Screening Machine)

Electrical heating Scope: The Air inside the Tray Dryer is heated by "U" tube MS/S.S. air heaters each of 1 KW. TheHeaters are fitted on the sides of the dryer to facilitate uniform heating. Maximum temperature Attained inside the dryer is 100' C and will be indicated and controlled by a Digital Temperature indicator cum controller over full range of heating load. Trays Description: Trays will be manufactured from 1.6 mm Alluminium /MS/SS sheets as per client’s application. The dimensions of Trays are 16" x 32" x 1.25". Trays have rounded corners with' mirror finish from inside and outside. Quality is available on demand Racks And Trolleys Racks are provided for trays inside the Dryer. They are of fixed type for 12 & 24 Trays Models. For 48,96 and 192 Trays Models racks are provided with wheels to slide them in and out of the Dryer.  An additional S.S, trolley for Racks for outside movement can be provided on request Advantages:   Large production capacity, Continuous operation; Simple structure, Easy to operate; less failure, Low maintenance costs; A wide range of application, Fluid resistance is small, You can use it to dry granule-like material, for those adhesion material It is also very beneficial; Operating flexibility, production flow allows the product to have a greater fluctuation range, will not affect the quality of the product Cleaning easy Simple system Flexibility in fuels used.

Types of Storage Equipments which we manufactures: Storage Tanks  Storage Silos    Vertical Storage Tanks  Horizontal Storage Tanks Ideal For:   Seeds and Spices Mines and minerals Building & constructions Adhesives Food products Animal feed Chemicals Dry and Wet Pigments Starch Products Pesticides and fertilizers Cement Industries Many Other Wet and Drying Applications as below:

Voltage : 220 v

Material : MS

Brand Name : Techno Enterprise

Advantages:   Large production capacity, Continuous operation; Simple structure, Easy to operate; less failure, Low maintenance costs; A wide range of application, Fluid resistance is small, You can use it to dry granule-like material, for those adhesion material It is also very beneficial; Operating flexibility, production flow allows the product to have a greater fluctuation range, will not affect the quality of the product Cleaning easy Simple system Flexibility in fuels used.

The grinding chamber consists of a serrated ratchet liner on top, and screen at the bottom for classification. Feed material is goes through grinding chamber by manual hopper. Spice Pulverizes Machinery is manufactured using premium quality materials that ensure high durability, tensile strength and resistivity to adverse condition. During the grinding process, a small quantity of air is generated, to remove this air a Polyester dust bag is attached below the through and the other end of the bag is hung at top, also acting like a dust collector.   Applications:   Mini Pulverizes are used for the grinding of small quantity of spices, especially for high value condiments like, cinnamon, cloves, cardamom, nutmeg, pulses, sugar with a capacity from 5 Kgs. To 60 Kgs. Per hour, In addition this machine are highly capable of grinding wet and pulpy material, like green/red chilly sauce, fresh ginger garlic paste, and other wet food products. Production 3000kg in 8s Hours. Size 60 HP Bottom blower with cyclone and and six cotton bag and installation at your site Manufacture in 19 MM Prime Mild steel Material and shafting EN –9 and bitter EN-8 Material , with base frame and 8 vibrating pad & Both pulley ( Motor Pulley and Machine pulley ).

Using Machineries for Sand Dry and Screening Plant: Bucket Elevator or Belt Conveyor Sand Dryer Coal Fired Burner Belt Conveyor Rotary Screen (Sand Screening Machine) Screw Conveyor Bucket Elevator Storage Silos.   Working Process:   Techno Enterprise is expertise in drying equipment as Sand dryer. First material (Sand) will store in silos or hopper. Through belt conveyor/Bucket Elevator  material passing in Sand Dryer for dryer process to remove internal moisture in Sand. Sand dryer is designed by the capacity requirement of clients and when material enter in shell of dryer form one side and another side given connection of coal burner which is used to fire in shell of sand dryer to remove moisture. After this process material out from dryer and going to Rotary screen through belt conveyor. Rotary Screen (Screening Machine for Sand) has various types and as per client requirement we set rotary screen in one, two, three or more outputs with different screen sizes. Screen Sizes defines different particles sizes separation from sands. After process of Rotary Screen, different particle of sands will collect in screw conveyors and will pass on Bucket Elevator. Bucket elevator Lifts separation material in Storage silos. In this process if client required mixing equipments then we suggest client Ribbon Blender for sand mixing plant..

We are offering sand dryers. Rotary drier instruction :- sand dryer is also known as rotary sand dryer. For the drying of sand , the rotary dryer is used widely, and usually it is single drum sand dryer and triple-pass drum sand dryer. Rotary drier structure:- drum, gear, ring, carrier roller, air pipe, high pressure draught fan, reducer machine, chimney, cyclone dust catcher, 50mm thickness heat insulating layer, feeder, electric control box, belt conveyor, etc. Rotary drier working principle:- firstly, use one belt conveyor or bucket elevator to send the wet silica sand into the drum of sand dryer. On the inner wall of the cilinderdrum, there are many lifting plates which is welded according to one special methods. when the sand dryer drum is rotating, these lifting plates makes the sand up and down to mix with the hot air completely. Durng this process, the moisture is evaporated. on the another side of the silica sand dryer, there is one high pressure draught fan which sucks out the steam, and then the steam goes into the cyclone dust separator. In the cyclone dust separator, the dust inside the steam falls down and goes out through the discharging hole of the cyclone dust separator. The steam goes into atmosphere directly through the chimney which is connected to the cyclone dust separator. Furnace for the sand dryer usually has two types. For the handling capacity below 30 th, our company's new design hot air furnace is very suitable. We have produced well the hot air furnace at our factory, and later when the user gets the hot air furnace, the user only need to connect the hot air furnace to the sand dryer directly by themselves. It will save the user much time and cost. When the handling capacity is bigger than 30th, the fluid bed furnace will be the best choice. The fluid bed furnace's heat efficiency is more than 95%, and you also can use the low level fuel such as brown coal, etc.

It requires 2HP to 25 HP electric motor to work efficiently. The rotary Sand dryer we provide, is very helpful in various process, which are as follows:   Advantages:   Large production capacity, Continuous operation; Simple structure, Easy to operate; less failure, Low maintenance costs; A wide range of application, Fluid resistance is small, You can use it to dry granule-like material, for those adhesion material It is also very beneficial; Operating flexibility, production flow allows the product to have a greater fluctuation range, will not affect the quality of the product Cleaning easy Simple system Flexibility in fuels used.

Model Number : 3YK-1245

Capacity : 15-80 t/h

Power : 11 kw

Weight : 4.807 ton

Dimension : 5600 x 1800 x 1850 mm

We are offering rotary dryers. Rotary drier instruction:- the drier is widely used for drying materials in the industries of cement, mine, contraction, chemical, food, compound fertilizer, etc. Feeding and discharging unit is installed with thermocouple to control drier temperature. The temperature change of drier's feeding end can be indicated by the thermometer to control the inner drier temperature (generally 250-350o) rotary drier structure:- drier machine is mainly composed of shell, back and forth supporting wheel, feeding and discharging unit and gear cap. The accessories which are not in the scope of this machine include firebox, feeding and discharging equipment, dust catcher, etc. Rotary drier working principle:- this drier adopts direct flow type of heating with heat source from firing unit. The material to be dried is pushed back immediately by spiral board when enters the shell from feeding tank and feeding chute. Because the drier is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, it is lifted by board repeatedly and thrown down accordingly, which make the material form even curtain, and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering.

Rotary Dryer is also known as continuous dryer. For the drying of material the rotary dryer is used widely, and usually it is single drum dryer and triple-pass drum dryer.   Advantages:   Large production capacity, Continuous operation; Simple structure, Easy to operate; less failure, Low maintenance costs; A wide range of application, Fluid resistance is small, You can use it to dry granule-like material, for those adhesion material It is also very beneficial; Operating flexibility, production flow allows the product to have a greater fluctuation range, will not affect the quality of the product Cleaning easy Simple system Flexibility in fuels used.

Working Principle & Features of Techno Enterprise’s Ribbon Blender: Ribbon Blenders is design to provide high mixing efficiency, blending small proportions into large stocks. Ribbon Blender is primarily designed for use with dry materials, although gas and liquid streams can also be introduced. A wide variety of configurations, for either batch or continuous mixing, are available. Application specific rotor mixing element design allows shorter batch cycle times due to increased mixing efficiency. Efficient mixing also provides good heat transfer through optional ASME Code designed jackets for heating or cooling applications. The compact and robust construction dust proof operation ensures their negligible running costs. We can offer these in various customized sizes/finishes. We provide custom made size design of the Ribbon Blender to meet your specific mixing requirements. Mixing vessels can be standard U-shape or cylindrical depending on internal pressure or vacuum requirements. Material finishes available ranging are from industrial coatings to dairy grade polishes.   The classic Ribbon Blender serves multi-purpose uses in the manufacture of food, beverage, pharmaceutical, cosmetic, chemical, plastic, agricultural and other products. Given its versatility and economy, the Ribbon Blender is often the choice for most straightforward blending requirements. In a well-made Ribbon Blender, precisely designed and fabricated ribbons turn within a close-tolerance horizontal trough to produce a balanced lateral and radial movement of the batch materials. Blending cycles are relatively fast and mix quality is not hard to duplicate from batch to batch. In principle, it requires very little maintenance even when subjected to frequent product changeovers. Scaling up from a pilot Ribbon Blender operation to large volume production is also generally uncomplicated. Despite these proven advantages, as with other types of mixers and process equipment, optimal mixing performance in the Ribbon Blender still starts with proper sizing, specification and customization. This white paper outlines some strategies for achieving just that, operating to maximum efficiency and ensuring a long service life out of your Ribbon Blender.   Ideal For:   Seeds and Spices Adhesives Food products Animal feed Chemicals Dry and Wet Pigments Starch Products Pesticides and fertilizers Cement Industries Many Other Wet and Drying Applications as below:

Features:   Easy to move from one place to another Superior quality Contains reactor with agitator which is mechanically sealed Mixing drum and blades are made out of good quality stainless steel to avoid any kind of chemical reaction. Very easy cleaning process. User friendly.

Features:   Particles are reduced to finer and more uniform sizes. Use of cyclone separator leads to less dusting on output side. No dusting from feeding hopper because feeding is done under negative pressure. It runs at lower speed , hence it requires much less maintenance. They are easy to clean & wash. It is manually fed as normal practice & can be supplied with automatic feeding as well. It uses air classification which does not require screen. Hence, it is free from problems like conking, Printing & frequent replacement of screen do not arise.

Material handling equipment is mechanical equipment used for the movement, storage, control and protection of materials, goods and products throughout the process of manufacturing, distribution, consumption and disposal.The different types of material handling equipment can be classified into four major categories transport equipment, positioning equipment, unit load formation equipment, and storage equipment.   Types of Material Handling Equipments which we manufactures: Belt Conveyor Screw Conveyor Bucket Elevator Dust Collectors   Ideal For:   Seeds and Spices Mines and minerals Building & constructions Adhesives Food products Animal feed Chemicals Dry and Wet Pigments Starch Products Pesticides and fertilizers Cement Industries Many Other Wet and Drying Applications as below:

We are offering jaw crusher. Ours is an eminent organization, engaged in manufacturing and supplying jaw crusher. Offered jaw crusher is used for crushing material and is developed in adherence with the guidelines laid in the industry to attain highest benchmarks of quality. Driven by motor, our offered machines are offered to our customers at industry leading prices. features: reliable operation easy maintenance low operating cost specifications: capacity(th): 140-260th electric motor power: 110kw   Features:   Our jaw crusher has Simple structure and reliable operation Easy maintenance and low operating cost Rugged Steel Body Jaw Plates of Wear-Resistant Manganese Steel Special Steel Eccentric Shaft with Heavy -Duty Double-Toggle Attachment Superior load distribution Spray Oil Lubrication System Guarantees safe operation at high speeds. Requires lower horse power cheaper squirrel cage Maximum Crushing Range-13MM to 62MM

Specialities : Superior performance,Longer working life,Easy installation

We are offering industrial ribbon blender. Product description contraction: ms + ms ss coating + ss + jacketed ideal for : pigment colors - minerals & ores - chemicals technical products dyestuffs - fertilizer - insecticides – pesticide spice, masala & food equipment because the drier is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, it is lifted by board repeatedly and thrown down accordingly, which make the material form even curtain, and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering.

We are offering impact pulverizer. Product description contraction: ms + c.i.casting ss coating ideal for: carbon & graphite-stone, chemicals products - dyestuffs - fertilizer - insecticides – pesticide spice, masala & food equipment rending classifying and conveying done in one operation. Particle size is finer and more uniform than that obtained from machine using screen . No dusting from feeding hopper because feeding is done under negative pressure. Less dusting on output side because of use of cyclone separator. It uses air -classification witch does require screen, hence the problems associated with screen like choking, painting and frequent replacement of screen do not arise it is manually fed as a normal practice. However, it can be supplied with automatic feeding also it runs at low speed compared to machines using screen, hence much lass maintenance