Tensile Tester Dealers in Ahmedabad (17 products available)

We are listed amidst the emerging Suppliers of Tensile Strength Tester and have been serving markets with the premium products. As we promise to offer quality approved products to the clients, we make use of only high-grade raw materials selected from one of the best sources present in the market.

• Voltage: 220-380 V
• Power Source: Electric
• Machine Weight: 25 kg
• Sample Rate: 400 Hz

• Load Capacity: 100 K.g
• Speed Accuracy: < 0.2 %

Tensile Testing Machine used for getting the accurate Measurement of material with standing force capacity by pull it apart and to determine what extent the materials can be stretched before reaching the breaking point.

A Universal Testing Machine also known as a materials testing machine and can be used to test the tensile and compressive properties of materials. This type of machines are called Universal Testing Machine because it can perform all the tests like compression, bending, tension etc to examine the material in all mechanical properties. These machines generally have two columns but single column types are also available. Load cells and extensometers measure the key parameters of force and deformation which can also be presented in graphical mode in case of computer operated machines.. These machines are widely used and would be found in almost all materials testing laboratory.

  Tensile strength and elongation are the two prime characteristics of most of the raw materials, whether they are metals or non metals such as Rubber, Leather, Textiles, Plastic, Paper or finished products such as Rods, Wires. Ropes, Yarns, Belts etc. These two properties often play a major role in determining the suitability of any raw material for any specified application. It is, therefore, of utmost importance to determine these characteristics accurately, conveniently, and quickly. Tensile testers are available in various models like ECONOMY MODEL (Fixed speed Digital display & displacement) COMPUTERIZED MODEL (Variable speed, software) TOUCH SCREEN MODEL   BURST PRESSURE To test internal pressure for rubber Hoses. & Hydrostatic test for Butterfly valve DIN ABRASION In DIN method of determining abrasion resistance of vulcanized natural or synthetic rubber, ; cylindrical rubber test specimen is abraded against an abrasive surface mounted on a rotatinl cylindrical drum in such a manner that abrasion takes place on one of the flat ends of the test specimel which is held against the abrasive surface under a specified load while being traversed across it. In thi method of testing abrasion; test specimen does not always move on the same path on abrasive paper but gradually a new portion of the abrasive paper appears to rotation of the drum. Amount 0 rubber reduced in the specimen due to abrasion is measured. OZONE CHAMBER This method covers the estimation of the resistance of vulcanized rubber to cracking whei I expo to an atmosphere containing ozone. The rubber specimens are kept under a surface tensile sly and the ozone content or partial pressure in the test chamber is maintained at a fixed value. H.V. TESTER For testing a high voltage for insulation mat, Rubber Gloves, welding Cable etc. SPARK TESTER Te Detect Pinhole, Puncture & Blank Portion in thick ( 1 mm to 10mm) insulating Coating on Conductive Material. DEEP FREEZER UPTO - 40C" This practice describes the characteristic mechanical behavior of polymers/ rubber at low temperatures, and outlines theconditioning procedure necessary for testing at these temperatures. DE-MATTIA FLEX TESTER FOR TESTING SIX SPECIMEN The ability of rubber products to withstand repeated flexing without developing cracks is of prime importance where such products are used in conditions undergoing repeated flexing. Flexing endurance of rubber products is determined by simulating in the laboratory the action of flexing repeatedly under standard conditions of speed, mode, and degree of flexing. One of the accepted procedures for determination of flexing resistance makes use of De Mattia Flex Tester.b

Universal Tensile Tester : Single screw Tensile Tester, Twin Screw Tensile Machine, Tensile Tester with Compression, Tensile Machine with COF (Film), etc. Large Range of Tensile Tester for Plastic Testing Lab.  

Tensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking.   The "Saumya" UTM gives highly accurate force measuring system with hi-tech design and is available in different models for testing a variety of materials. Load cells, grips, fixtures can be interchanged easily to perform different tests like Flexural, Compression, Co-efficient of Friction, Peeling and bonding strength.             STANDARDS :   ASTM D 638, D 882, D 790, D 695, ISO R527, BS 2782 and other equivalent standards.   APPLICATIONS:   Tensile is the universal test applied to many polymers to check the mechanical properties & it is the most important property as majority of end use application involved some degree of mechanical loading & properties like Tensile modulus, Elongation, Compression etc. are calculated using this machine. For woven sack tanacity will be directly displayed.     USP: The "Saumya" has some unique models developed with versatility in mind. "Saumya" UTM's can be used with or without using P.C. Universal software capable of performing test on any type of materials. Safety provisions in form of software, Electrical & Mechanical features. Test on high & low loads with different cross-head travel speed can be performed. The "Saumya" tensile offers testing flexibility and ease of use via an intelligent electromechanical system data transfer ratio of load cell to instrument is 24 bits to give instatenuoes readout of data during process. The "Saumya" versatile software helps to visualize the process and behavior of materials in form of data and graphs with all the calculated results required. Units of weights "Newton" or "Kilograms" can be selected from software. Round or of any different shape meterials can be pre specified on specification window for direct calculation of area.   The Equipment is known as Universal Tensile Tester, Computerised Universal Tensile Tester, Automatic Universal Tensile Tester, Plastic Universal Tensile Tester, Universal Testing Machine for Plastic Lab, Tensile Strength Tester, Plastic Tensile Test Measurement Machine, Twin Screw Tensile Tester, Tensile with Compression Tester, Plastic Film Tensile Tester, Plastic Maximum Tensile Strength Measurement, Universal Materials Testing Machines, Plastic Material Testing Machine, Universal Tester, etc.    

Tensile test is a measurement of ability of material to withstand forces that tends to pull it apart and to determine to what extent the materials stretches before breaking STANDARDS ASTM D 638,D 882, D 790, D 695, ISO R527, BS 2782 and other equivalent standards, Load Measuring System as per ASTM E4, ISO 7501. Strain Measuring System require as per ASTM E83 APPLICATION Tensile is the universal test applied to many polymers to check the mechanical properties and it is the most improtant property as majority of end use application involved some degree of mechanical loading & properties like Tensile Modulus, Elongation, Compression etc. are calculated using this machine USP The "Kaiser" has some unique models of Tensile Testing developed with versatility in mind. Kaiser UTM's can be used with or without using P.C. Universal Software capable of performing test on any type of materials. Safety provisions in form of software, Electrical & Mechanical features. Test on high & low loads with different cross head travel speed can be performed. The "Kaiser" tensile Testing offers testing flexibility and ease of use via an intelligent electromechanical system data transfer. ratio of load cell to instrument is 24 bits to give instateneous readout of data during process. The Kaiser versatile software helps to visualize the process and behavior of materials in form of data and graphs with all the calculated results required. Units of weights "Newton" or "Kilograms" can be selected from software. Round or of any different shape materials can be presp UNIQUE FEATURES OF TENSILE TESTING MACHINE SOFTWARE: On line update facility Colour combination can be changeable Line, bar chart, Dotted line, etc facility in graph. Graph Grids colour Combination Facility. Graph Zooming Facility. Individual Graph facility for Tensile, COF, ICOF, Compression & Flexural Individual Portion Zooming Facility. Individual graph Comparison facility. Result Convert Facality in Graph & Excell Formate Graph Overlapping Facility for analysis Material Property. Comport Auto Selectable. With in Second we get the Result in Kg. / cm2 and Nt. / mm2. Auto Scaling and fix scaling Facility. Company logo inserting facility. USB Driver Facility For Safety Features. Two way Communication Facility. Can generate the report with your company logo.

This Instrument is in according to ASTM BS, DIN,ISO, ISI (Indian Standard) or according to customer’s required specification.  Maximum Energy range up to 25Joules. LCD display to check result. Semi automatic model with DEESHA's customized PLC. Direct calculated results display and hammer falling facility directfrom the controller. Hammer length and sample details entry manual from the display. Wise type holding fixture for tensile impact test. Sample clamping mechanism as per ASTM D 1822 or according to requirement.

(A) For Single Yarn. Cap.10/50kg. LCD & Computerised. (B) For Lea. Cap.100/500kg. LCD & Computerised (C) For Lea/Fabric & Single Yarn Cap.5kg to 500kg. Computerised in Single Machine (D) For Fabric, Rubber, Metal,Strip,Plywood,Wire & Paper etc.etc.Cap.250kg/10T LCD & Computerised Standards ISO, ASTM, BS, IS. Machine suitable for Fabric/Lea testing Single screw heavy duty frame structure balance load facility for smooth working and operation Machine is Floor mounted model with microprocessor based computer supported software system. Machine can work on both directions Tensions Machine is suitable for Fabric/Yarn lea application.(Strength & Elongation) Machine is fully digital model with accuracy. Speed selection is 300mm & 450mm speed A.C. Drive. Speed change settable with digital key Pad on A.c.Drive Extension resolution 0.01mm Extension accuracy. 1mm Extension measurement grip to grip. Force Measurement and detection via. Digital load cell. Accuracy 0.5% of applied force. Real Time Graph of Load vs. Extension is displayed during the test.(incase of computer interfacing) User can convert graph into Stress vs. strain at any instant. Easily Unit conversion facility also available after completion of the test. Easy storage and retrieval of test profiles. Manual cross head, up, down, stop control Input of test data formatting of test report via. computer software. Note - Computer with printer is required at customer end. The same has to be arranged by you at your cost. Computer features having windows XP loaded software and Microsoft office 2003 loaded PC. Load Cell – 1 No Range: 250kgf. Least Count: 0.01kg and accuracy 10 gms at 250kgf Load cell is permanently fixed. No Need to change any fixture Window based test software supplied along with the machine. Load Cell -1 No. Range: 500kgf. Least Count: 0.1kg and accuracy 10 Gms at 500 kgf. Load cell is permanently fixed. No Need to change any fixture. Window based test software supplied along with the machine.

We offer universal tensile testing machine which is Electrically operated mechanical tensile testing machines, capable of determining tensile strength and elongation of Textile, Rubber, Plastic, Cables & Conductors, Leather, Asbestos, Paper, Plywood, Metal and other materials Can test materials in conformity with IS or other standards. Models : Mechanical version Microprocessor based version Computerized version The Electronic Range: Test your products with pin-point accuracy Due to its high functional capabilities and advance technical features more & more organizations are preferring electronic version Simple to operate, No special qualification or skill required for operating the equipment. Accuracy quality and performance – Comparable with any imported equipment Reliability: KMI is the pioneer in manufacturing Tensile Testing Machines in India. Thousands of customers including institution like BIS, NPL and other rely on kmi equipments for testing their products. Details technical Literature on Request: Pendulum type machine for routine testing Suitable for testing wide range of materials Most reliable equipment with an- matched performance. Easy to operate with built – in safety features. Scale with fine graduation. Elongation scale – I MM Least Count Facility for load elongation curve Available in capacities upto 50 KN

Tensile Strength Tester, Melt Flow Index Tester, Pendulum Impact Tester

Universal tensile tester, HDT or VSP, Izod Charpy tester, Digital Density

Tensile Tester, Basic Digital Tensile Testing Machine

Tensile Strength Tester, Digital Infrared Pyrometer

Tensile Strength Tester, Toxicity Tester, galvanized iron cable tray

Electronic Lea Tensile Tester, Crock Meter, UTM Universal Testing Machine