Home Dehumidifier Dealers

Respiratory Humidifier is designed for use in hospital environment wherever medical gas is being supplied to patients. nice 8050 Respiratory humidifier (Medical Humidifier) incorporates latest technology that provides Physiological level of humidity at body temperature. The nice 8050 advanced microprocessor controls & delivers precise, reliable performance in humidifying the respiratory medical gas before delivered to the patient and ensures 0% water condensation in any breathing circuit. Capable of operating in either invasive or non-invasive control mode with flow detection. The nice 8050 features dual servo control feedback humidifier system incorporates to constant monitoring and control chamber and proximal temperatures in the airway line. As a result high temperature gases cannot exist anywhere in the system. When use a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized. Comprehensive audible & visual alarm constantly protects against potential problems. The nice 8050 will alert at variations of set limit temperature Vs actual. Optimal humidity of greater than 33 mg/l promotes mucociliary clearance and reduces the work of breathing. The design of nice 8050 Servo Humidifier makes it the ideal humidification system for Adult Ventilator, Infant Ventilator, NCPAP, Bubble CPAP, Infant Resuscitator and High Flow Oxygen Therapy for Adult, Pediatric & Neonatal care for both invasive and non-invasive application. The servo controlled Humidifier accommodates both high and low flow ventilation therapies, as well as heated and non-heated wire breathing system.

“SCIENTECH” Dehumidifiers are water condensing type. base on “Refrigeration Cycle” to avoid use of expensive chemicals required for dessicant  type models. The unit is self standing and is mounted on a study angle iron frame, fitted with caster wheels. Dehumidifier excess moisture from the atmosphere and it  fitted with hermetically sealed  compressor. Heat exchanger and  water condensing coils aremade of S.Steel collection tank is provided below the unit to collect condensate water, Humidity is controlled by automatic HUMIDISTAT incorporated in the unit upto 30% ± 3% RH, depending upon the ambient conditions. To achieve very low humidity, the room should have  a independent  window type Air Conditioner to match with the dehumidifier heat load in the room. Suitable to work on 220/230 Volts A.C. Supply.

Model : FM-OS-503 Water Contact Parts: AISI 304 Quality Stainless Steel. Other Parts: Rust Proof, Powder Coated. Water Evaporation Capacity: 40 Liters/hr. Water Regulator: Imported Gate Valve. Air Quantity: 2500 CFM. Motor capacity: 0.75(3/4) HP, 3 Phase, 400/440 Volt, 50 Hz. AC Supply. Dry Weight: 40 kg. Mounting: Wall Mounting/Ceiling Hanger/Floor Mounting Stand or Trolley Mounting. Packing Dimension & Gross Weight: 650 mm X 650 mm X 650 mm (60 kg approx).

De-Humidifier (PLT-262) APPLICATIONS OF DE-HUMIDIFIER The purpose of De-Humidifier equipment is to reduce the moisture content in the space & to protect against damage by moisture to Agricultural Products, Life Saving Drugs, Food Products, Electrical & Electronic Components, Instrumentation, Plastic, Rubber Paper, Metal and to any other substances which are sensitive to moisture. It is very useful where the products requiring drying are temperature sensitive & during the process of Dehumidification, the space becomes gradually dry and accordingly moisture flows from the materials to the space. In case if the area is larger and the human occupancy is more than three, it will be necessary to install sufficient number of De-humidifier equipment to match up with the moisture load in the space to be Dehumidified . SALIENT FEATURES & CONSTRUCTION OF DE-HUMIDIFIER These units are water condensing type based on refrigeration cycle. Fitted with hermetically sealed compressor for removal of Excess Moisture from Atmosphere. Humidity is brought down to 35% controlled by Imported Humidity stat with an accuracy of ?3% RH Supplied with Heavy duty Base Stand workable on 220 / 230 volts A.C. supply.

Model: ASEAR AMHF 500Body: Stainless SteelEvaporation: 3-7 Ltr.P/HWater Pressure: 5PSGAtomizing Capacity: 30-50 ml/minPower Supply: 220-240 VAC/50 HzOperating Load: 120WWater Capacity: 5 LitreDimensions:(L x W x H) (15" x 15" x 17")   SPECIAL FEATURES Manual timer (Optional) Float Valve (Optional) Uniform distribution

      Triplex high pressure heavy-duty crankshaft pump 3 ceramic plungers, brass head Bride with flexible coupling Working pressure: 70 bar Pressure regulating valve, built-in bypass with solenoid valve (BPS) Safety valve Glycerin filled pressure gauge Heavy duty ventilated motor 3-phase 4.0-5.5 HP 500-1450 RPM ON-OFF switch with thermal overload 3/4" M BSP inlet - 3/8" M BSP outlet Cyclic digital timer         Weatherproof s.steel skid cover on antivibration rubber feet Equipped with three-ph inverter with soft start only one variable pressurised pumping system can be used for multiple rooms with each room solenoid valve / humidistat arrangement for low initial investment & energy saving by VAR pump. Low noise Automatic variable flow rate- Can operate several nozzle lines Automatic switch-off if all line are closed Automatic switch-off if water supply is missing Automatic switch-off if no pressure (leakage) is detected Automatic switch-on if at least one line is opened Automatic switch-off if motor overheats Energy saving (absorbed power is proportional to water flow) Longer pump life (lower RPM) Automatic filling of pipelines (timer OFF until lines are refilled) Manufactured in compliance with CE regulations     EVOLUTION TIME ‘‘LSP’’ series for systems from 5 up to 30 fogging nozzles These series of professional high pressure pumps are the suitable solution with high quality and safety standard for all requirements to build professional misting systems with flow rates up to 2.5 l./min. with singlephase power supply.Our built-in digital cyclic timer (”Time” versions only) offers the full efficiency control of the fogging system by direct adjustment of the frequency of mist spray increasing the advantages on water and energy consumption with savings up to70%if compared to standard systems. LSP system with 700 RPMS motor allows very low noise AND longer pumplifetime.

The nice 8050 features dual servo control feedback system incorporates to constant monitoring and control chamber and proximal temperatures in the airway line. As a result high temperature gases cannot exist anywhere in the system. When use a heated wire breathing system from nice 8050, ventilated gas continues to warm during delivery. Rain-out and waste are reduced, while the need for circuit change is minimized.nice 8050 heated wire humidifier incorporates latest technology that provides Physiological level of humidity at body temperature.The nice 8050 accommodates both high and low flow ventilation therapies, as well as heated and non heated wire breathing system.

Stainless Steel Body Capacity 5 Liters The unit is capable of Atomizing upto the cap: 5 litre of Water at full evaporation in the driest possible ambient condition. Humidifier is based on rotoates disc. Complete unit F.H.P motor having 2800 RPM .(without Humidistat).