Aggarwal Group Ambala City, Haryana

  • V wire screen

    V wire screen

    Request for Price

      V Wire screens are fabricated in pipe form from wires. A V Shaped profile wire is spirally wound around a cage of longitudinal support rods. Each intersecting point of these wires is fusion welded. The Pitch of winding gives different spacing between two adjacent turns of wire, This space becomes passage for water to enter. One end of the screen is closed by a flat screen pf same slot opening and the other end is fitted with a threaded ring and end cap for resting on the pump.The submersible pump with motor is to be fitted inside this jacket. Thus it ensures that water reaching the pump is filtered through screen and clear water column is available to pump. This reduces wear and tear og pump impellers due to sand in an existing tube-well.   Salient Feature Continuous Slots Non Clogging Slots Very Large & Open Area Better Sand Filtration

    ...more
    Get Best Price
  • Underground Drainage System Pipes

    Underground Drainage System Pipes

    Request for Price

      Underground Drainage and Sewerage system has been designed with a view to modern man's inclination towards health, hygiene and his aversion to filth and pollutants. Due to unpleasant nature of human waste, a drainage system should be “out of sight and out of mind”. Most of the drainage systems are actually hidden from sight. It is hence important that it should be of superior quality and should be able to function year after year without leakage or defects. It becomes unpleasant and expensive to address such problem that arise in conventional underground products unexpectedly. Such problems may happen due to poor product quality or due to faulty construction and outdated technology. Underground Drainage and Sewerage system is intended to carry soil and waste from building to roadside sewers or drains and from there to treatment plant or disposal point. This system is advantageous and offer multiple advantages over traditional drainage products for all sorts of drainage and sewerage application and installations. Highly recommended for buildings where hygiene is a prerequisite such as hospitals, hotels etc. This can also be used for rainwater collection and disposal, including rainwater harvesting. Being 100% watertight, it is free from ingress and seepage of water and hence considered to be most hygienic. Unlike conventional drainage products, it is free from pollution of underground water, soil or ill effects on building foundations. In this fast age, this product emerged as blessing to housing and construction sector.  

    ...more
    Get Best Price
  • Submersible pumps

    Submersible pumps

    Request for Price

      Submersible Motors are manufactured as per IS: 8034 & 9283 Standards. These sturdy and robust submersible motors are made using advanced technology. All parts are manufactured and fitted precisely using CNC machine that imparts excellent mechanical strength and reliability.These are used for wide range of applications like Agriculture, Civil & Industries, Fire Fighting System, Commercial / Community Water Supply, Sprinkler & Drip irrigation.     Induction motors are easily re-windable using multi layer PVC insulated wire for better reliability. Motor filled with water and oil as per specification. Self-aligned carbon Stainless steel thrust bearing which withstands high axial thrust load in water lubrication. Electrically designed to lower power consumption and operating cost. Non-magnetic, corrosion-resistant high-grade stainless steel stator body. Water-filled motor is available in capacitor start and run design. Gun Metal bush is made with additional centrifugal molding process and 2% Nickel is added Superior designed Noryl impellers and diffusers give higher hydraulic performance and greater efficiency and provide higher resistance against wear and tear from sand and other impurities. Stainless steel strainer prevents particles over a certain size from entering the pump. Pumps are available with non-return valve to reduce the backpressure of water when it is switched off. Impeller and Bowl are accurately machined by CNC machine to ensure high dimension accuracy. Rubber bush and SS hard chrome sleeve increase wear-resistance against sand. Lightweight, compact and robust construction design.

    ...more
    Get Best Price
  • Submersible Flat Cables

    Submersible Flat Cables

    Request for Price

    Application The PVC insulated and sheathed 3 core flat cables are used for giving electrical connection to the submersible pump motors. These are manufactured keeping in mind the severe, tough and difficult conditions in which they have to operate. The slot available in the tube well being narrow the shape of the cables has to be suited for such an application. These cables conform to and are marked IS 694: 1990 up to 4.0 sq. mm. The sizes above 4.0 sq.mm. cables generally conform to IS 694 : 1990. FeaturesManufactured from bright-annealed 99.97% pure bare copper conductors these cables have low conductor resistance. The inner cores are insulated with a special grade PVC compound formulated and manufactured in-house. The tough robust outer PVC jacket protects it from the oils, greases, various chemicals and abrasions, thereby giving long life and electrical safety.

    ...more
    Get Best Price
  • PVC Pipes

    PVC Pipes

    Request for Price

    High pressure uPVC solvent weld plumbing system is the most suitable, easy and economical solution for distribution of potable water. It is technically superior, cost effective and offers many advantages over conventional G.I. piping system. This system is very easy to install and functionally most suitable for all plumbing applications. Apart from more than 40 - 50% cheaper to G.I. piping system, it has many more years of service life. This hygienic system is endowed with many good features. It is a value added long term plumbing solution for building industry. HIGH PRESSURE UPVC THREADED PIPES These pipes are manufactured as per ASTM D 1785 standard and are available in SCH 40,80,and 120 pressure class. These pipes are generally used for plumbing, water supply and jet pumps. ASTM threaded pipes are 30-40% cheaper to G.I. pipes. The system is UV-stabilized.   S.W.R. drainage system has successfully replaced conventional CI and AC drainage systems. The S.W.R. drainage system is designed for quick and efficient removal of waste without leakage. It is highly resilient, tough and durable with high tensile and impact strength. Moreover it is free from scale formation, rusting, weathering and chemical action. It is virtually immune to attack by bacteria, fungi, micro-organisms and insects. Thus the system is a long term solution for building drainage with estimated life over 50 years. In addition to the various benefits, it is more cost effective than any conventional drainage system. Pipes are available in 75 to 160mm and fittings are available in 40 to 160mm sizes. Pipes conforms to IS 13592:92 and fittings conforms to IS 14735:99 and are made as per international standards.

    ...more
    Get Best Price
  • Pipe Fittings

    Pipe Fittings

    Request for Price

    GI Pipe Fittings products are developed using Copper, Brass, Stainless Steel, Alloy steel, Titanium and Carbon Steel etc. Pipe fitting products are widely used in construction, shipbuilding, water supply, gas, plumbing, hose fitting, power and chemical plants for controlling oil and water and any liquid flow. These are:     Heat & High Pressure Resistant Durability Longer Life Cost Effective Easy & faster Assembly Protected against freezing temperature. Reliability

    ...more
    Get Best Price
  • Monobloc Pumps

    Monobloc Pumps

    Request for Price

      Self Primimng Pumps are normally manufactured as per IS: 8472. These Self Priming Domestic Pumps are light in weight with rugged construction design and balanced parts which give noiseless operation for a longer duration. These pumps are available from 0.25 HP to 1.50 HP. Pumps are used for wide range of applications like – Domestic Water Supply, Gardening and washing purposes, etc.     The motor body is made from extruded aluminum and cast iron for better heat dissipation. Capacitor starts and runs motor with IP 44 protection. Pre-lubricated double-shielded ball bearings for a longer life. High quality carbon-ceramic mechanical seal for a longer life. The rotating parts of motor and pump are dynamically balanced to ensure minimum noise and vibration. Protective Enclosure – Totally Enclosed Fan Cooled motor (TEFC) type means no dust or moisture. Pump can operate in wide voltage range.     Centrifugal Monoblock Pumps Centrifugal Monoblock Pumps are manufactured as per IS: 9079. These pumps and impellers are specially designed to get the best hydraulic efficiency. At the same time, the totally enclosed fan-cooled system is suitable for conditions where there is a wide voltage fluctuation. These are used in wide range of Applications like Domestic and Agricultural Water, Community water supply, Commercial establishments etc.     High operating efficiency resulting in lower power consumption. Dynamically balanced rotor for longer trouble-free life of the pump. Dynamically balanced impeller for vibration-free operation and long life of the bearings. Rotating parts are dynamically balanced to ensure minimum noise and vibration. "A" Class insulation and low temperature for trouble-free operation in wide voltage bends. Grease-lubricated anti-friction ball bearings of “SKF” brand are fitted at both ends to withstand radial and axial loads. Single shaft for motor and pump ensures good mechanical strength and higher efficiency.

    ...more
    Get Best Price
  • Hand Pumps

    Hand Pumps

    Request for Price

    The India Mark II hand pumps family was developed as a low cost option for rural water supply program. The pump is specially designed for the prolonged and continual community use in demanding conditions. These pumps are manufactured and supplied conforming to Bureau India Standards IS: 15500-2004. In order to ensure trouble free service in the field, these pumps are manufactured adhering to strict internal quality control system.  

    ...more
    Get Best Price
  • Forged Fittings

    Forged Fittings

    Request for Price

    Malleable Pipe Fittings offered feature superior construction finish and provide perfect suitability for connecting of waterways, oil and gas in different industry sectors. Made available in options like elbow, tee, socket, nipple, union, flange and others, these are developed from malleable iron in BS and other industry standards. Some of its features include availability in different size options; BS thread support; pressure handling of 1.6Mpa; availability as per OEM specifications.

    ...more
    Get Best Price
  • Erw Pipes

    Erw Pipes

    Request for Price

    Mild Steel (MS) pipes are manufactured using low carbon (less than 0.25%) steel. Due to low carbon content the pipes do not harden and are easy to use. As MS Pipes are made from mild steel they can easily be welded and formed in various shapes and sizes for pipelining and tubing purposes. These are generally used for drinking water supply i.e. Plumbing, Firefighting, HVAC but can also be used in various other Industrial and Engineering applications. These pipes are usually coated with other metals/paints/varnish etc to prevent it from rusting but extra care should be taken to prevent it under extreme conditions. MS Pipes are available in a various sizes, grades and specifications as per various national and international specifications (IS, BS API, ASTM, DIN) meeting the requirement of sectors like, Agriculture, Oil and Gas, Public Health, Housing, Irrigation, Engineering etc.        

    ...more
    Get Best Price
  • CI Castings

    CI Castings

    Request for Price

      CI Manhole Covers & Fittings Pulleys – V Belt / Patta / Motor etc CI Agri Fittings – Assemblies, Flanges, Column Pipe Adapters Garden Chairs, CI Rice Sheller Parts.

    ...more
    Get Best Price
  • Supreme Casing Pipes

    Supreme Casing Pipes

    Request for Price

      Tube wells generally fails due to problems like corrosion and encrustation associated with conventional pipes. Due to corrosion the strainer screens get damaged and the sand particles enters along with the water. Due to encrustation, pipe diameter as well as effective area of screen get reduces and hence tube well becomes unserviceable in short period. These problems are totally eliminated in Supreme casing pipes made from specially developed PVC compound. Supreme casing pipes offer superior performance at a lower cost and becomes the prime choice of the customer. We offer varieties of pipes for bore-well applications to cater every need of bore-well sector which includes Casing pipes as per IS 12818, Casing pipes as per ASTM D : 1785, Ribbed screen casing pipes for tube wells. SDR casing pipe series for shallow depth applications as per company standard, Plain pipes as well as screen (slotted) pipes are available in every category of casing pipes. Slotted pipes can also be used for rainwater harvesting. Column pipes for submersible pumps are also offered to lift the water from the bore -wells.

    ...more
    Get Best Price

Be first to Rate

Rate This

Select the service for which you are writing review for this business

How would you rate the business?

What would you like other to know about this business, based on your experience?

Minimum 20 characters!

About the Company

  • Primary Business Retailer
  • Secondary Business Type Manufacturer / Exporters / Wholesale Suppliers

Opening Hours

  • SUN : Closed
  • MON : 9:30 AM - 6:30 PM
  • TUE : 9:30 AM - 6:30 PM
  • WED : 9:30 AM - 6:30 PM
  • THU : 9:30 AM - 6:30 PM
  • FRI : 9:30 AM - 6:30 PM
  • SAT : 9:30 AM - 6:30 PM
Specialise in All Kinds of Pipes, Pumps, Motors, CI & SG iron Castings and other related products for Industrial, Agricultural & Domestic purposes
Introduction
Aggarwal Group is a Vibrant and self-motivated Group Headquartered in Ambala, India. Aggarwal Group over last 48+ years has evolved as one of the most respected organisation in field of Waterline, Agricultural Irrigation and Domestic Pipes \ Plumbing \ Pumps & also Manufacturing unit for Cast Iron Products.
The Group is managed by well-qualified and experienced professionals, known for their dynamism, ethics and ability to achieve goals. They, in turn, are assisted by a team comprising of self-motivated, disciplined, ethical and highly competent personnel in their respective fields of specialization. The Group is perceived as one of the fore-runners in North India in all its business domains and continues to grow, year after year.
Infrastructure:
Retail Operations – Based at Old Anaj Mandi in Ambala City ( 1/2 KM from the National Highway to Ludhiana)
Central Mother Warehouse & Operations Centre – Based at Village Nasirpur in Ambala City (On Ambala – Hissar Highway) we have a 1 lakh sq.ft. Facility with mechanised facility for managing storage, loading and unloading. The facility also has an in-house centre with required machines to carry out the jobs of Threading, Welding, Cutting etc. for Pipes and other products. We also manufacture products like Submersible flanges, Clamps etc.
Other warehouses at other locations & billings points totalling to 20000 sq. ft.
Two Manufacturing Units for CI Casting Products & SG Iron Casting Products spread over 3 lakh sq. ft. area.
Group Companies:
Aggarwal Pumps & Pipes
Bansal Tube Co,
Aggarwal Brothers
Aggarwal Precicast
Aggarwal Ferrouscast Pvt. Ltd.
Read More »

Contact Information

Aggarwal Group

  • Aggarwal Group
  • 47th Milestone, Hissar Road, Ambala City, Haryana
top