Laboratory Autoclave And Sterilizers Dealers in Ambala

For the optimal quality Portable Autoclave, we are the perfect destination in the international market. Automatic Portable Autoclave is a compact, pressurized, steam-heated vessel commonly used for heating and sterilizing hospital and laboratory components. They are durable and easy to operate. In addition, we are one of the eminent Laboratory Portable Autoclave Exporters from India.

We offer qualitative range of Laboratory Portable Autoclave for our esteemed clients. Our range of Laboratory Portable Autoclave is highly appreciated by the clients for its high efficiency and quality. It is manufactured from high grade raw material and technologically advanced machinery which makes it in sync with the international standard. Supplied with : Tripod standSpring loaded safety valve for pressure adjustmentDead weight safety valve Features : Fitted with pressure gauge : up to 20 psi Hydraulically tested up to 40 psi Supplied with electric fittingsCord and plug work on: 220/230 volts A.C. SupplySize : 300 x 300mm Body made of : Aluminum (Deluxe Model) S.S. (JOINTLESS)

Our Rectangular Autoclave is highly famous and is highly demanded by all. We supply our premium quality horizontal rectangular autoclave at one of the most affordable prices for everyone to avail them easily. We have also gained the position one of the preferred rectangular autoclave suppliers in India. Construction The unit has inner Chamber, Boiler, Lid and Jacket - all made of 304 grade stainless Steel, outer chamber of thick gauge mild steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. It is supplied complete with vacuum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular stand. It is available in the following standard sizes. Operatable on 3 Phase, 440 Volts A.C. Supply. Mode of Heating Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 440 volts three phase 50 cycles. Working Pressure The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g (15 psi - 17 psi) Working Temperature : 121° C Hydrotest Pressure :

We are listed at the apex in the list of the most dependable Portable Autoclave Manufacturers in India. The array of the Portable Autoclave Sterilizers available in the array includes Electrical as well as Non Electrical Portable Autoclave to meet the specific requirements of the clients. The unmatched quality and unsurpassable performance of the Portable Dental Autoclave have attracted various national as well as international clients to place bulk orders. Moreover, the specifications and sizes available for the Portable Autoclave are mentioned below: Specifications:- Made of Heavy Duty AluminumDouble Safety Valve.Fitted with 2.5" Special Gauge.Steam Release ValveWater Outlet AssemblyWorking Pressure 15 lbElectric Load 2 KW Sizes Available:- 300mm x 300 mm (12" x 12")300mm x 375 mm (12" x 15") Optional : Electrical & Non Electrical Types of Autoclaves Portable AutoclavesVertical AutoclavesHorizontal AutoclavesAutoclave - Stainless Steel Cooker Type (Seamless)Autoclave - For Two Drums

A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins.  Optional:-i) Automatic low-water level cut off- device.ii) pressure Control switch.iii) Water lever arrangement.iv) Dressing bins for various size.

 Alpha Chem is manufactures,exporter & suppliers Cement Autoclave. Cement Autoclave : These equipments are tested in accordance with the procedures laid down in ASTM C 151 standard where change in the length of the bars (test) of cement is measured for the difference in the size after exposing them to stipulated pressure and temperature for a specific time period.   Feature :   Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety  Radial Locking Arrangement  Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation Working pressure for our standard model cement autoclave is between 60 -350 psi, however this can be upgraded to be used for higher pressures   Pressure Control:   The pressure inside our cement autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient. Specification : Wing nut lock locking mechanism for ultimate ease of operation and safety.Conforming to ASTM C151, AASHTO T 107Huger grade spring loaded safety valve of brass., duly chrome plated.High accuracy and reliable pressure gauge.   General Description & Specifications:      The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.   Inside chamber dimensions    10.5 cm dia x 40.5cm height. Rating                                       :    3000 watts Pressure range                           :    21 kg/cm2 Least Count                               :    04 kg/cm2 Temp.range                                :    215 deg C Power supply                              :    230 Volts AC Single Phase 15 Amp   Standard Accessories :     Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost:     Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

This is a double walled unit mounted horizontally on a sturdy, heavy mild steel tubular stand duly painted . the inner wall is made up of 18 SWG stainless steel sheet duly argon arc welded . outer wall is of thick s.s. plate and is provided with radial locking system which ensures complete risk free and leakproof sterilization . door when in operation or under pressure . pressure is adjustable from 10 to 20 p.s.i. fitted with pressure gauze. Safety valve and steam release valve. Horizontal autoclaves are available with or without s.s. boiler for units fitted with S.S. boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use re provided hydraulically tested up to 40 P.S.I. . automatic vacuum breaker is provided to break the vacuum in case of vacuum due to steam condensation . fitted with automatic pressure gauze control switch and automatic low water level cut off device. To work on 220 volt, A.C. supply; Available in following sizes:  Dia x Depth Load 350 x 550 mm 3 K.W 400 x 600 mm 4 K.W. 550 x 750 mm 7 K.W.

We are offering All contact parts is made of S.S 316 with food grade joints silicon gasket load in trolley and with door safety locks. When door is in under pressure and jacket is provided for storage of steam and boiler is electric operated with heaters and digital temperature controlled and display pressure. Switch is provided for controlling of pressure and safety .Valve is provided for complete stainless steel. The sterilizer is based on the principle that microbiological action of saturated steam at elevated temp is rapid and thorough. All models work on downward displacement of air principle which is most economical method of obtaining for all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical institute Suitable for sterilizing hospital dressings, linen, rubber plastic goods, surgical instruments, glassware’s and utensils etc. Construction Robust and rugged all weld construction which is leak proof unlike riveted construction. Inner chamber & Outer chamber is made of stainless steel of 304316 quality and jacket is made out of rolled steel. Sterilizers will have single door made out of rolled steel lined with S.S. sheet on both sides. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure. The steam jacket is lined on the outer side with asbestos sheet or glass wool which prevents heat losses due to radiation and is covered by strong rolled steel sheet duly painted.Boiler Made of thick stainless steel plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacementrepair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. This device protects the heater in the generator from burning out dry. The steam pressure in the boiler is indicated on an individual pressure Gauge. Safety Lock for Door Every horizontal rectangular sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure. The Chamber Two separate valves provided for evacuating air and steam from inner chamber and jacket as and when desired. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically. Switch Box Houses the Pressure control switch, Main switch, Pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.Technical specification S.S. Load & carry Transfer trolly. Watering type vacuum pump with S.S. condenser and starter. Automatic recording cycle with printer Microprocessor controller with fully automatic. Fully automatic printer thru. PC with graphical display. PLC Provided HMI PLC, HMI, sensors RTD and pressure transmitter, Pressure gauge etc would be reputed make. Other Features Triple Safety : The sterilizer is provided with triple safety. By a pressure control switch which automatically limits the pressure to the required set valve. Two spring loaded safety valves one each at chamber and boiler level. A dead weight safety valve at chamber level. A Plug Screen : Prevents the discharge line from choking. The plug is easily removable for routing cleaning. A powerful Ejector (for drying sterilized linen) circulates air through the chamber. The circulating air passes through a corrosion resistant metal wool filter. A Dial thermometer is provided to show the chamber temperature. Automatic Vacuum Breaker : Automatic Vacuum Breaker is provided to break vacuum case of vacuum formation due to steam condensation. Operating. Temperature and pressure : Sterilizing Temp. : 121°C. Sterilizing Pressure : 1.2 to 1.5 kgCm2, (15 psi to 22 psi) Optional Accessories ChamberJacket of S.S. 316 Door of S.S. 304316 Additional TrayShelves Carriage & Trolley Direct steam supply from centralized boiler Temperature recorder High pressure High vacuum model Additional door (Double door)

Horizontal labware have always been appriciated in the industries because of the standards and high quality maintained while designing.Horizontal autoclaves are bigger in size than there counterpart vertical autoclaves. These also work on the same principal of sterilization by using heat and pressure. However these are designed for bigger workloads. The horizontal autoclave is tested by keeping in mind the ASME code. Accordingly the horizontal autoclave must be tested 130% of the rated pressure. There is not much need of designing small autoclaves with inside vacuum building phenomenon, but in the bigger horizontal autoclaves it must be kept in mind, when the steam colds down it tends to build a vacuum inside the chamber. However at acumen labware we engineer the horizontal autoclave for every possible flaw which might appear.