Industrial Pump Dealers in Bengaluru

Gear pumps are positive displacement Pumps, a popular pumping principle. These are often used for pumping lubricating Liquids, Oils, and other Viscous Liquids. Gear pumps come in either single or double (two sets of gears) pump configurations with spur (shown), helical, and herringbone gears. It is well known that, Helical and herringbone gears typically offer a smoother flow than spur gears, though all gear types are relatively smooth. For this reason, our large-capacity gear pumps use helical or herringbone gears. The small external gear pumps typically operate at 1750 or 3450 rpm whereas the larger models operate at lower speeds. Both sides of the gears have close tolerances and shaft support of the gears. This enables them to operate to pressures beyond 3,000 PSI / 200 BAR, making them well suited for use in hydraulics. Closer & tighter internal clearances ensure a more reliable measure of liquid passing through a pump and allow for greater flow control. Owing to this, gear pumps are always preferred for precise transfer and metering applications involving Polymers, Fuels and Chemical Additives.

Double diaphragm pump, VERSA-MATIC Air Operated Double Diaphragm (AODD) Pumps are driven by compressed air. These Pumps are equipped with the antistalling, non-icing, lubrication free valve system which makes the Pump suitable fortrouble free, continuous operation.

Versatile pump for trouble free use on 50 litre plastic packs Steel pump assembly, plastic pump head & lift handle Capacity: 1litre/15 strokes Pump includes 48" soft PVC discharge hose & curved steel spout For use with engine oils, gear oils, diesel, & light fuel oils Do not use with water based & Other corrosive media

Our organization is instrumental in providing Domestic Water Pressure Booster Pump. The offered pumps are used in Independent bungalows, row house and small apartments. These pumps are highly functional as it is used to give a flow range of 2~28M3hrM3hr. Our Domestic Water Pressure Booster Pump is highly demanded in the market for energy saving performance. To cater to the needs of our clients, we provide built in thermal overload protection and separate panel for three phase systems.

Gear Pumps are essential for pumping solutions for viscous liquids (upto 1,00,000 SSU) with high pressure. These Pumps are available in SS and CI material of construction that to be with or without flange ends. Gear Pumps can be used for pumping solutions of liquids with high temperature and that can be provided with steam jacketing arrangement.  This is most common types of pumps for hydraulic fluid for power applications and used where liquids are having implicit lubricating property.   This is because of pump reliability, simplicity and a very high power ratings. These types of  pumps are more suitable for pumping system of all types of oils, priniting ink, latex, starch, bitumen, glycerin, liquor,soaps, grease, Molasses, coal tar, dyes, Bleaches, Vinegar, glues, petroleum products and etc.  Gear Pumps includes both internal and external pumps.   External Gear Pumps are widely used where low pressure is desired and Internal Gear Pumps are also more useful where higher pressure are desired. Internal gear pumps perform better compare to a external gear pumps this is because of lower speeds and with higher viscosity fluids. Gear Pumps are mainly used for oil fire or hydraulic services.   Apart from this special gear pumps are available for pumping of Molasses and those pumps are well suited for all Distilleries and sugar factory applications.

A solar water pump has a mini power house at its heart and consists of a calibrated and matching solar array of modules – tuned with the equivalent power of pump for that particular application. The solar water pumping system is capable of running all types of electrical water pumps with applications varying from irrigation to household demands. Irrigation pumps such as submersible, surface or deep well can also be coupled with drip irrigation systems to enhance the returns from this configuration.

We are offering lubricating pump. Features light weight portable for easy handling of grease hand lever operation swivel assembly at both side of hose pump assembly with pressure plate spare kit

Univac dry pumps are built for continuous duty and trouble free performance. These pumps are ideal for applications requiring oil free air at moderate pressures. These pumps are compact, sturdy and reliable requiring no maintenance. Manufacturing and assembly methods employed ensure high efficiency of operationDT series pumps have graded graphite vanes which have a very low but a permanent wear factor. Dry vacuum pumps may run at pressure unlike other kinds of pumps. Maintenance is limited to replacing of vanes and cleaning the filters.

Ideal for effective sewage removal from apartments, large buildings, and for new or renovated structures, the robust Sulzer abs Piranhamat is designed for low or no maintenance, and can operate with heads of up to 27 m. A variety of inlet port sizes DN 50/100/150 increases its compatibility. Coupled with a simple discharge line connection (by means of the patented quick-coupling system), this makes the Piranhamat a pump that is well-suited for portability. technical Details  Material of construction: tank - polyethylene; motor housing - C.I GG 25; motor shaft - SS 420; Head range: 0-27 m Size range: up to 1 kW Flow range: 0-10 m3/hr   Applications  Removal of effluent from a WC Installation in an existing house or during the renovation of old buildings Where usage is by members of the public and cannot be monitored and more effluent sources are to be connected   Key Features  Compact unit ready to plug in and suitable for direct Eurotoilet connection Automatic level control and alarm Attractive corrosion-resistant synthetic tank Maintenance-friendly unit with easy access lid (no screws) Carbon filter fitted to reduce odours Non-return valve and 2 m cable with Europlug supplied as standard

SAER Open well enbloc submersible pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, MBS pumps are ideal for a wide variety of applications. SAER pumps represent state-of-the-art hydraulic design. Built to deliver optimum efficiency during periods of high demand, SAERMBS range offers high efficiency, high resistance to sand and other abrasives and allows solid contents, motor burnout protection, and easy maintenance. Operation Condition Max Head : 113M (371 ft) Max Capacity : 18m3hr Temp of Pumped Liquid : 0oC to 40oC Frequency : 50 Hz Maximum quantity of sand allowed in water :   50 gm3. Suction of solid bodies : Max mm 2.5 Minimum level of liquid  : 100mm from bottom of suction grid. Maximum depth of application : up to 70 m below the water level. Pumps Construction Outer Jacket Motor & Pump : AISI 304 SS standard. Impellers and diffusers : Hardwearing, thermoplastic resin Enbloc Shaft:AISI 431 stainless steel Mechanical seals :   Graphitealumina oxide silicon carbide Features Allowed solid contents up to 50 gm3 , max size of solid Contain is up to 2.5mm Outer jacket made entirely from AISI 431 stainless steel, including delivery casing with 1” 14   G threaded outlet Diffusers fitted with self-adjustable wear rings Enbloc pump and motor shaft supported at three points Permanently pre-lubricated bearings Interposed oil chamber (FDA-approved, non-toxic oil). Motor with outer jacket in AISI 304 steel, cooled by the pumped liquid IP 68 Protection class Pump-motor unit is easily dismantled and repaired   Applications Water supply from open well, tanks & Sumps Agricultural Applications Residential & Civil Applications from 6” Pressurizing water for commercial application

We are offering heavy duty pumps creative split casing process pumps are designed for handling highly abrasive slurry with slide back facility. Slide back design makes maintenance easy by pump base sliding on the rails for replacement of impeller gland parts without disconnecting the suction discharge connections. The pumps are designed with replaceable liners and low speed with high efficiency. Bearings are designed for more operating hours.

Converting to solar power is the answer to fighting the menace of load shedding in urban, Semi Urban and Rural areas. By doing this, the FUEL BUNK Owners will not only save on the recurring costs of electricity and generator expenses but will also ensure continued and uninterrupted supply to the customers. Switching to solar energy would free from them from adverse effects of load shedding and help save over 70 per cent on electricity and Diesel Generator bills.

Internal high efficient copper tube in shell heat exchanger. Only need to connect with regular pressure tank. Easy installation. Built in water flow swtich detect. Use SAGINOMIYO Electronic expansion valve to adjust gas flow n side-ranage accurately. Two timer setting function on digital LCD wire setting controller. Internal clock and setting memory record, auto-restart after power comsumption. Adjustable 1-5°C temperature differential return from setted water temp.  

POWER HP    :  Single  : 0.5 - 2 HP                      Three  :  3 - 50SPEED          :  2880 RPMDISCHARGE RANGE (LPM) : Single  : 20 - 650                                                      Three  :  300 - 3300HEAD RANGE (MTRS) : Single  : 5 - 35                                                       Three  : 20 - 70