Level Controllers Dealers in Bangalore

This is the simplest Basic water level Controller with indicator it is the most economical and energy efficient product from Sri Digitek, Two sump levels, Two over head tank indication. Flow, motor on, dry run, power on. Features: The water level controller can switch on or switch off the pump, to maintain the pre defined water level at the storage tanks.Low AC Voltage sensing circuit to avoid polarization of electrodes in water. These special stainless steel plastic molded conductive electrodes are Long life sensors and do not require frequent cleaning or replacement.

RISC architecture based, intelligent state-of-the-art PNPF Prok dv's make DigitalMicrocontroller based Intelligent Automatic Power Factor Controller/Regulator/CorrectionRelay (APFCR) with on-line monitoring of line PF through industrial grade back-lit LCD Display.The Unit uses one of the tried and time tested intelligent algorithms to switch the capacitorbanks, in a most optimum combination in a shortest time for any dynamic load conditionswithout the need to select the complicated switching sequences by the user. Specification User entered parameter is stored in non-volatile memory (EEprom) CT Ratio & System Voltage user selectable through key board display Independent of Frequency Most Optimum combination obtained through advanced control programming RISC architecture dedicated Microcontroller based Target pf 0.80lag to 0.90 lead selectable through key board display Auto/Manual mode No complicated setting procedure User friendly interface

Digital temperature controller are highly noticed in market for its features such as efficiency, performance, accuracy and durability. Manufactured at our highly sophisticated infrastructure units using excellent quality input and superior technology, these products assist in accurate measurements. We being one of the well known temperature controller manufacturers; have supplied our products to several industries across the country.

Our valued clients can avail from us sophisticated Liquid Level Controller (DLIC-R1). Our Liquid Level Controller (DLIC-R1) is based on high-end technology which ensures efficient performance and accuracy. We offer Liquid Level Controller (DLIC-R1) at reasonable price. Function : Pump Mode : When the liquid level goes at or below the set 'Pump low level', the pump relay gets energized after completion of pump 'On' delay. When the liquid level goes at or above the set 'Pump high level', the pump relay gets de-energized. The alarm relay gets energized after completion of Alarm 'ON' delay when the liquid level goes at or above set 'Alarm High level' or goes at or below set 'Alarm low level' and gets latched until "ACK" switch (provided on the front panel) is pressed or remote Alarm ACK switch pressed.Drain mode : When the liquid level goes at or above the set 'Pump high level', the pump relay gets energized after completion of pump 'On' delay. When the liquid level goes at or above the set 'Pump low level', the pump relay gets de-energized. The Alarm relay gets energized after completion of Alarm 'On' delay when the liquid level goes at or above set 'Alarm high level' or goes below set 'Alarm low level' and gets latched until "ACK" switch (provided on the front panel) is pressed or remote Alarm ACK switch pressed. Highlights : Digital Liquid level indicator / controllerWide Operating voltage range 90 � 280v AC1 inch seven segment displayProvision for resistive float sensor inputProvision for 4-20m A inputPump / Drain function programmableProgrammable low and high levels setting for pump relayProgrammable low and high levels setting for alarm relay0 � 10 V dc output for re-transmission

Digital Controller for panel mounting 48×96.• Backlighted LCD display, 2 lines x 16 characters and 4 keys keypad, for an easy user interface;• 2 set-points with independent adjustment and free relay outputs, selectables in On-Off mode, Proportional or Time-Pause Mode;• 0/4-20 mA Proportional Output with selectable range;• PT100 temperature probe, Level and Flow sensor inputs;• Setting menu protected by password;• Fast setting by user menu selection, manual control of both relays (pumps priming), runtime monitoring of all outputs and control of the last probe calibration;• Realy n.2 selectable as setpoint or on each alarm signal.• Statistics of the alarms, of the number of setpoint activations and of the operating time of each relay;• Self-calibration of measure probes AR 10 S pH-Redox • Controller for measurement and control of pH measure range 0.00-14.00 pH, with 0.01 pH accuracy, Redox potential, measure range -1500÷1500 mV, with 1 mV accuracy;• Changing of the monitored parameter by Advanced Settings Menu, protected by password. AR 10 S Chlorine • Controller for measurement and regulation of free chlorine available for amperometric Pt- Cu probes;• Measure Range:0.00-10.00 ppm. AR 10 S CD • Controller for measurement and control of conductivity, available for conductivity probes with K=1, K=5 and K=10. AR 10 S CL-J • Controller for measurement and regulation of free chlorine and each other measure available for amperometric selective membrane 4-20mA probes;• Measure Range selectable: 0.00-2.00ppm/0.00-5.00ppm /0.00-10.00ppm/0.00-20.00ppm/0-200ppm. Model CODE DESCRIPTION ADRS10PHRX AQUA AR 10 START PH-RX CONTROLLER ADRS10CL AQUA AR 10 START CHLORINE (PT-CU) CONTROLLER ADRS10CD AQUA AR 10 START CONDUCTIVITY CONTROLLER ADRS10CLJ AQUA AR 10 START PPM A-J PROBES

Our range of temperature controller is just matchless in the every advanced feature and technical performance in comparison to the many other temperature controller manufacturer and suppliers across india. So, if you are too looking for such products then we are the ideal place for you to buy temperature controllers.

 Input (RTD, Volts, mA)• Fail-safe Design protecting the process in case of system malfunctioning• Bright Red seven segment LED Display• Display brightness control• Status Indication LEDs• Relay Output (optional)• Retransmission output (optional)• RS485 Modbus Communication (optional)• Transmitter Power Supply• Relay/ retransmission output mapping with respect to input

ATN INSTRUMENTS Manufactures Microprocessor based water level controller, in many homes and other public places, groundwater is used, which is pumped up to overhead tanks using waterpumps which are controlled by electric motors. Controlling the pumps is often a necessity to avoid wastage of water.

We offer intelligent power factor controller, elmeasure has introduced yet another innovative product called ipfc. It helps in controlling the power factor thereby avoiding the penalty imposed by the electricity supply company. it also saves cost, increases internal electrical system capacity and improves voltage drop at the point of use. This leads to an efficient electrical system. Unlike in conventional controllers, elmeasure’s power factor controller senses three phase voltage and current. This ensures the perfect controlling of power factor in unbalanced load conditions. It’s rightly called intelligent as it increases the life of the correction capacitor, by controlling based on the capacitor bank switching history. It is not just a pf controller but also a true multifunction meter. It has v, a, hz, w, var, and wh parameters in addition to pf. Hence this product is truly power packed. It also has rs485 communication option. This product can be used in all incomers as a pf controller and also as a multifunction meter.

The compact IPC with modular EtherCAT I/O system for automating real-time applications DIN rail mounted. Optimised processor performance of the latest ARM generation for synchronous motion control and fast switching and detecting of output and input signals. The C6 SMART offers, with a width of 47mm and additional four I/O modules and under 150mm space on the DIN rail, a compact IPC control system with 128 in- and outputs. The C6 SMART is designed for runtime environment and real-time capability. It allows control tasks that place high demands on performance and functionality, with the expectation to be cost-efficient. Detecting and switching of signals is realised without additional delay via the internal EtherCAT I/O module bus. Equipped with a multi-core processor, built-in Micro UPS, smart storage concept and many modular interfaces, C6 SMART is designed to handle all control system tasks.   Features:  EtherCAT  CoE Protocol Support for basic I/O and DS402 drives  Three display ports (DVI-I, Display Port, HDMI)  128 GB solid state drive (SSD)  Four 100/1000 Base T Ethernet ports  Two ports dedicated to Windows/Linux LAN  Two ports dedicated to Motion Core (i.e. one EtherCAT and one Modbus)Six USB ports with two of the ports USB 3.0 capable in the i7 version Two RS232/422/485 ports No fan or internal cabling Industrial aluminum casing Small form factor 10” × 6” × 2.7”, DIN-rail wall mount 9 – 36 VDC (+24 VDC @ 3 A) (Min 72 W) AT/ATX CE, UL, CCC, FCC, C-TICK, BSMI certiGed Two Mini PCIe Slots

We are offering a wide range of Digital Temperature Controller efficiently fabricated by us. Digital Temperature Controller has one touch button on the front panel and can be set by using front panel keys. We are providing Digital Temperature Controller at market leading prices. Moreover, we give the timely delivery of Digital Temperature Controller at fixed time frame. Types : PT–100K. J Range : 0-1200° C0-199.9°C Specifications : Output : Relay contact, SSR O/PSet Points : Single set point, 2 set pointIndication : LED indication for O/P ON/OFF, 7 seg LED display for temperatureOperating Voltage : 230 VAC +/- 10% 50 HzTemperature : 0 to +50º CHumidity : 0 to 90% RH (Non Condensing) Sizes : 96 mm × 96 mm, × 100mm, ( Model BE-7000)72 mm × 72 mm × 60mm, (Model BE-9500)

Extensive catalog of motorized positioning With 50 years of precision mechanical design, fabrication and motion control experience and expertise, Newport has developed an extensive catalog of motorized positioning and motion control products. Field proven motorized positioners are found across a broad spectrum of applications.

We are offering automatic water level controller. Exceptional display : shows clear indication of water levels in the overhead tank and sump tank, blinking blue light indicates water flow to overhead tank automatic switching on and off of the motor as per the water level in the tank. controls voltage variation: the motor is cut-off if there is low supply voltage to protect the motor. surge protection for spikes and abnormal voltage overshoots. dry run protection: the device detects dry running of motor and the supply to the motor is cut-off as a safety precaution to save the motor. auto-manual operation: has an easy operable auto-manual side leap switch. indications for motor: green indicates motor on, red indicates dry running of motor. side leap switch enables to power on/off and to directly switch on the motor if needed.

DX-WLS-01 wireless water level controller system   DX-WLS-01 wireless water level controller system offers a portable, efficient and high performance solution for Automation. The system operating in the 2.5 GHz frequency band with maximum 100 meters range. The system consists Transmitter & Receiver unit. Main Features.Easy to set up & maintainStable & reliable operationProven RF wireless technologyUser-friendlyStable coverage range 100 metersHighly interference-resistantReal-time interference signal analysisAutomatic data encryptionUltra low power microprocessorReal-time Water level displayEnergy-saving sleep modeExternal antennaPower consumption:

A microprocessor instrument with the most advanced technology formeasuring, data storing and printouts of temperature, humidity,voltage and current. This can be used in Research Laboratories,Processing Industries, Power Plants, etc.