Mpp Technologies Pvt. Ltd. Peenya, Bangalore, Karnataka

Material : Steel

Tanks for Distribution and small Power Transformers Traction Transformer Tanks , Converter panels & Heavy Sheet Metal components Transformer Tanks Range: Application : Power transformers Distribution transformer Flame proof transformers Locomotive transformers

Tanks for Distribution and small Power Transformers Traction Transformer Tanks , Converter panels & Heavy Sheet Metal components Transformer Tanks Range: Application : Power transformers Distribution transformer Flame proof transformers Locomotive transformers

Tanks for Distribution Transformers | Traction Transformer Tank and Converter Panels Traction Transformer Tanks , Converter panels & Heavy Sheet Metal components Transformer Tanks Range: Application : Power transformers Distribution transformer Flame proof transformers Locomotive transformers

Single Phase Round Tanks List Of Machineries 400 MT AUTOMATIC HYDRAULIC PRESS 63 MT SEMI-AUTOMATIC HYDRAULIC PRESS LINEAR WELDING FIXTURE CIRCULAR WELDING FIXTURE SHEARING MACHINE SHELL ROLLING MACHINE CIRCLE CUTTING MACHINE NECK FORMING MACHINE COLLAR & PIPE BENDING MACHINE MARKING MACHINE

MPP Wall Mounting Enclosure( MWME ) Mono block enclosure system with folded steel sheet & rear sheet welded Standard Features Provision for mounting plates Panel color RAL 7032 Mounting plate color RAL 2000 Concealed hinges M6 earthing studs Cable gland plate with sealing gasket Neoprene gasket for high degree of protection Ingress protection up to IP 55 Optional Features Mounting plate, wall fixing brackets, glass door Size: As per the customer specification

MPP Industrial Suite Cubicle (MISC-A) Modular metal cubicle consisting of structure of five fold closed profiles with welded top and bottom frame and vertical removable bolted profiles with 1.6mm backside covers and 2.0mm thick doors with three point locking system. Standard Features Welded top and welded base Removable roof and bolted back covers Front door with three point locking system Mounting plate support and mounting plate sliding guide Neoprene gasket for high degree of protection Ingress protection up to IP 55 Panel color RAL 7032 and plinth color RAL 7022 Optional Features Rear door with or without glass Fans or fan cutout and drawing pocket Louvers on side cover or front door Roof canopy Inter panel joining kit Adjustable mounting plate Plinth size 100 or 200 mm Swing handle three point locking system Size: As per the customer specification

MPP Floor Mounting Enclosure( MFME ) Modular metal cubicle consisting of structure of five-fold profiles with rear welded frame and vertical removable bolted profiles with 1.6mm side covers and 2.0mm thick doors with three point locking system with open sides for easy access and cable entry from top or bottom of the panel. Standard Features Welded top and welded base Removable roof and bolted back covers Front door with three point locking system Mounting plate support and mounting plate sliding guide Neoprene gasket for high degree of protection Ingress protection up to IP 55 Panel color RAL 7032 and plinth color RAL 7022 Optional Features Rear door with or without glass Fans or fan cutout and drawing pocket Louvers on side cover or front door Roof canopy Inter panel joining kit Adjustable mounting plate Plinth size 100 or 200 mm Swing handle three point locking system Size: As per the customer specification

MPP Wall Mounting Enclosure( MWME ) Mono block floor Mounting enclosures are made from cold rolled sheet three folded with back plate welded on to a rear profile for higher protection. Standard Features Mounting plates (adjustable) Cable entry at top/bottom (double or single) Door opening 125 degree Plinth 100/200 Panel color RAL 7032 Mounting plate color RAL 2000 Neoprene gasket for high degree of protection Ingress protection up to IP 55 Optional Features Drawing pocket Partial or full glass doors Size: As per the customer specification

Stator stacks / Pole Bricks are used as housing for DC/AC motors and windings. The process involved in fabrication of these stator stacks is raw material procurement, fabrication, stress relieving, machining, assembly, and painting. Once they are cleared from painting, they are packed suitably and dispatched.                                

MPP undertakes general fabrication, such as aluminium and stainless steel enclosures. Motor bodies and pressed components are also manufactured.                              

Fire Rated and Clean Room Doors For more information visit www.mppdoors.com Types of Doors with Infill 2HRS FIRE RATED DOOR INFILL : HONEY COMB OR ROCKWOOL 4HRS FIRE RATED DOOR INFILL : HONEY COMB OR ROCKWOOL CLEAN ROOM DOOR INFILL : HONEY COMB OR PUFF GENERAL PURPOSE DOOR INFILL : HONEY COMB ACOUSTIC DOOR INFILL : RUBBER SHEET WITH ROCKWOOL / PUFF SAFETY DOOR INFILL : HONEY COMB / ROCKWOOL COLD ROOM DOOR INFILL : ROCKWOOL / PUFF RADIATION PROOF DOOR INFILL : LEAD SHEET WITH ROCKWOOL

Fin-Wall Corrugated Tanks of the International Standard for the First time in India Made on Forming line from  of Germany Features High-efficiency cooling Modular construction Reduced steel requirements Smaller footprint Less oil required Lower cost   Lower cost                           Manufacture of Fin-Wall Corrugated Tanks Backed by long, multi-faceted expertise in sheet-metal fabrication, MPP Technologies have set up a new unit in Tumkur near Bangalore to manufacture corrugated tanks for transformers. MPP is the sister TTP Technologies the largest unit for Transformer Radiators in the world. The plant is equipped with a high-capacity CNC forming line manufactured by Heinrich Georg of Germany, world leaders in this specialized field. The heart of the machine is a hydraulic fin folding unit, which can be programmed for specified widths and lengths, with varying corrugation depths. The production is continuous, starting with cold-rolled steel strips decoiled from rolls loaded on an expanding mandrel. The fin folding operation is combined with cutting and edge bending and a strip welded to reinforce the edges welded to the frames. The corrugated walls are seam welded and a strip welded to reinforce the edges welded to the frames. Spot welding of the embossed sides gives extra strength to the sides (optional). The corrugated walls are assembled into tanks by welding these to upper and lower frames. After shot-blasting to remove all loose particles and contaminants, the tanks are finished with a special primer and finish for long-lasting corrosion resistance. The finished tanks are ready for incorporating the active parts straightaway. Testing MPP corrugated tanks are manufactured to stringent DIN specifications, with quality assurance procedures in place at every stage. Tests are carried out to ensure that the tanks are leak-proof, capable of being hermitically seated. Advantages of Corrugated Tanks Because of the high thermal efficiency in heat dissipation, the fin-wall corrugated tanks require around 30 percent less steel for construction. The volume of oil required is also correspondingly less. The compact construction can save floor-area space by more than 40 percent. These advantages result in significant overall savings and make corrugated tanks the preferred choice for transformer manufacturers, as compared to conventional types. Product Range MPP Technologies manufacture custom-made corrugated oil tanks for various transformer capacities, ranging from 100 KVA to 5,000 KVA.The fin fold length(l) of the panels can vary from 400mm to 1,600mm; the fin(H) height varies from 50mm to 400mm. The number, pitch and depth of corrugations can be varied, depending on the transformer specifications. Fin wall material thickness for corrugated walls with embossing pitch of 40mm and more 1mm thick fin wall can be used for hermetically sealed tanks with fin height upto 200mm and nominal length upto 800mm. Fin wall material thickness for corrugated walls without embossing pitch of 40mm and more For hermitically sealed tanks with fin height 180 mm and more and nominal length 900mm and more, a 1.5 mm material thickness shall be used.