Cooling Systems Dealers

The solid state cooling system is based on peltier effect & can be used for applications such as viscosity bath & other small cooling application  These are basically miniature Thermoelectric Solid State Systems, designed on peltier effect. In many situations, need of analysis at subambient temperature arises. The lab chemist has to use either an elaborate and bulky compressor based cooling system or use ice. Both have their own disadvantages. These Systems are simple, sturdy & occupy very small bench space. No compressor no noise, no vibrations. No Ice, no mess. All SolidState design, no moving parts, virtually maintenance free. These are suitable to carry out Titration at subambient or at elevated  temperatures, to maintain Cell Holder Temperature, viscosity measurement, to cool vials & test tubes etc. Model MCS - 150 For  titrations at sub ambient or at elevated temperatures : In this case the titration beaker ( 55mm Dia) is inserted in the block which is kept at desired temp. Application : Titrations for diazotisation , SAP value and pH Stat

Engine Cooling Systems from MAHLE Behr are very compact, with high performance and durability. Our intercoolers are constructed with high performance turbulator-provided inside tubes giving high durability, and plastic inletoutlet tanks which withstand high pressure, resulting in compact size with less weight. We have KOMO-type condensers designed such that they can be directly snap-mounted to radiators without brackets, and plastic frames that can withstand high refrigerant internal pressure.

An adequately designed fan mounted on motor shaft with suitable suction area for cooling the motor as well the compressor. Suitably designed exhaust passage at the top of canopy for hot air to escape to atmosphere.

We are dealing in industrial cooling systems, Airmake Cooling System, Offering a range of user friendly, high performance Air Washer, Aluminum Air Grill, Diffusers, Dampers, Filters, Louvers, Cellulose Pad & etc. Cooling.

The Powertrain Cooling System, including the Radiator, stabilizes the temperature of the cylinder walls, (raised by engine operation) to maintain thermal efficiency and prevent overheating. DENSO's Radiator is a reliable, highly functional component based on advanced heat-exchange technology.

we are offering chilled water air conditioning system. we are one of the renowned solution providers in the sphere of chilled water insulation piping for pvc, pb, and water utility piping in hdpe, pvc, and firefighting system in hdpe, compressed air piping in pb hdpe. our services are known for timely execution and use of high end technology to ensure complete satisfaction.

Industrial & Telecom Cooling Liebert industrial infrastructure & Telecom Enclosures Liebert ICS, Industrial Cooling Series, 140-210kW   Liebert InteleCool2, Shelter Cooling System, 5.25-17.5kW

bellows and spring placed between the shaker and its base. For further isolation, air bellows are attached to the bottom of the base or the combo base in case of a system with a Horizontal Slip Table. As a result, all system supplied by Sdyn can be installed in a multistory building as their is negligible dynamic weight due to vibration in the shaker body. Cooling System It is not possible to run a shaker reliably without proper cooling because the extensive heat produced inside the shaker can damage the armature coil. Small shakers (50kgf and below) generally feature a permanent magnet instead of a field coil, therefore, they can operate without any cooling at light loads. A similar feature can also be offered with bigger systems to meet certain test requirements like Squeak and Rattle test being performed on an air cooled shaker. A shaker can either be air cooled or water cooled. Each method has its own key features, advantages, and disadvantages. Selecting a cooling method that meets customer’s test requirement is crucial. Both these methods are breitling replica discussed below: Air Cooling Method An air cooled shaker features a centrifugal blower for forced air cooling. A hose pipe connects the bottom of the shaker to the blower which sucks air from a perforated sheet at the top of the shaker. It is very important to ensure that the blower is not located in close vicinity of the shaker because this might cause the exhaust air from the blower to be sucked back by the shaker. In this scenario, the shaker’s temperature will keep increasing as it is being cooled by the same air in a loop, causing thermal runaway and even burning of the armature coil. To ensure safety and proper operation of the cooling system, various sensors are installed in the shaker that are mentioned below: mentioned below: Air Pressure Sensor – To ensure sufficient air pressure for proper suction Air Temperature Sensor – To stop the system if the air temperature is too high to ensure proper cooling Due to suction, audible noise is always present near the shaker and the blower. It is suggested to take measures during installation to prevent this audible noise from creating an un-conducive working environment for the test/ lab personnel. Water Cooling Method A water cooled shaker features a dedicated cooling system for storing, circulating, and cooling distilled water that is used for cooling. The system is assembled in two 19-inch racks of 42 unit height. Pressure pump is installed in the cooling rack to circulate distilled water at high pressure through the shaker’s field and armature coils. Heat exchanger is installed in the cooling rack to cool this distilled water with another supply of water from a cooling tower or chiller at the customer’s site. To ensure safety and proper operation of the cooling system, various sensors are installed in the cooling racks that are mentioned below: Liquid Pressure Sensor – To measure the water pressure in the pipes in order to detect any obstruction in the pipeline Liquid Flow Sensor – To measure the water flow in the pipes in order to detect any leakages in the pipeline Liquid Temperature Sensor – To measure the temperature of the incoming and outgoing water in order to detect overheating

The FWKS is a compact fluid-water cooling system for cooling and lubrication circuits with a plastic tank with circulation pump, a plate heat exchanger and additional accessories. This system is primarily used as a temperature-controlled intermediate circuit. In this way the contamination and corrosion in the coolant circuits which could arise as a result of directi cooling with poor water quality is prevented. Function: The pump conveys the cooled operating fluid from the tank through the component that is to be cooled. Once there, it absorbs the heat. It then flows back to the plate heat exchanger, where it is returned to a cooler temperature by the cooling water. Technical data: Cooling capacity: up to 250 kW (depending on the limiting conditions) Flow rate: up to 300 lmin Tank content: up to 110 l Cooling medium: water

EXHAUST FAN FOR POULTRY VENTILATIONFAN-PAD COOLING SYSTEM (COMBI TUNNEL VENTILATION) Fan housing and shutters made from highly galvanised Steel sheets in order to assure highest strength. Propellers made from Stainless Steel. Individually tested motor for quality control. Statically and dynamically balanced Propellers. Maintenance free Shutter bearings. Shutter opening is not affected by the weight of dust deposited on shutter blades. Shutters remain firmly closed when the fan is not operating. Every fan is individually checked for quality. Can be used for various applications like poultry farms, industrial buildings and green houses.

Target equipments evaporator cooling system division manufacturing includes of Evaporative cooling performance which installed outside of wall, brings fresh air into room by air distribution pipe with lowest power consumption, allows door and windows open, make your workshops and offices, factories cool in hot weather to be possible by paying 80% less power consumption to get best productivity and highest working efficiency. This dynamic due to changes in external temperature and humidity level. Under typical operating conditions, an evaporative cooler will nearly always deliver air cooler than 27°C (80°F). A typical residential 'swamp cooler' in good working order should cool air to within 3–4°C (5–7°F) of the wet-bulb temperature. Target cooling machines ensure even & continuous water distribution which in turn gives higher cooling efficiency .Water distributor used will not allow circulating water to leak/to fall fan motor or to deviate its flow. Even water distribution will ensure higher cooling. Residences Offices Hotels Hospitals Showrooms Banks Commercial complex Shopping malls Cinemas Auditoriums Textile factories Computer rooms Animal house Green house generators rooms gas turbine intakes industrial cooling for shop floors spot cooling for hotspot comfort cooling for offices,Poultry etc.., commercial agriculture Advantages Less expensive to install Less expensive to operate Ease of Maintenance Ventilation air