Capacitors Dealers in Chennai

PFC CAPACITORS The efficiency of power generation, transmission or conversion is improved when operated at near unity power factor. The least expensive way to achieve the same is by installing Power Factor Correction Capacitors. TIBCON PFC Capacitors are designed and manufactured for most demanding applications and toughest ambient conditions. These Capacitors are made in accordance with Metallised Polypropelene technology with built-in SELF HEALING properties. We mastered this technology over a period of 30 years and have state of art manufacturing facility for metallization of the film. The elements are wound on fully automatic numerically controlled winding machine that ensure no corona discharge & ionisation. The elements are housed in Cylindrical shaped aluminium case with in built explosion proof safety device.   UNIQUE FEATURES Compact Cylindrical Construction Unique Explosion Proof Design 3 Phase - Delta Connection Easy Banking Non-PCB Oil Encapsulation ECO-Friendly High Temperature withstanding capacity Self Healing Properties Safe-Touch, Shock-Proof Terminals Longer Life Expectancy Available in both Cylindrical & Box type design Wide Range - Standard Duty 1-50KVAR in 400/415/440V Heavy Duty - 5-30KVAR in 440/480/525V Super Heavy Duty - 5-30KVAR in 600/660/690V APPLICATIONS APFC Control Panels Wind Turbines Commercial Establishments Industrial & Semi Industrial applications De-tuned Harmonic Filters Motors & Transformers Welding, Furnaces etc

We are involved with the manufacturing exporting and supplying of the high quality Power Factor Correction Capacitors. These Power Factor Correction Capacitors make use of the technique where the dielectric is comprised of different layers of polypro. Construction : Power Factor Correction Capacitors give a consistent performance at full load. Operating conditions for these Power Factor Correction Capacitors should be controlled as excessive heating affects the life span of these Power Factor Correction Capacitors. Long Life (Heavy Duty) Series : Industrial Power Factor Correction Capacitors and High performing PPMh Capacitors featuring elements wound with PPMh film sets provide new standards for performances, reliability and compactness. Lifespan of up to 150,000 hours can better performance is obtained by effective self healing and decreased dielectric losses.

We sternly keep a check on the designing and manufacturing of products and ensure that the material is strictly procured from the leading names only. The raw material is examined on the grounds of quality to deliver finest range of products. We follow the globally accepted packaging norms that help us in delivering the products safely. Our professionals ensure that the packing material we use keeps the product safe from external damaging factors. Features : Advanced mechanism Safe & reliable Reasonably priced

1. Point of products       We started the development of capacitors with large capacitance and for high ripple current,       ahead of other companies. Now, our capacitors for mid-to high-voltage have a high market       share. Our Screw Terminal Type Aluminum Electrolytic Capacitors are used for inverters for       trains elevators etc. in the fields that are required to offer high reliability.      2. Features       Through the self-development of high-quality anode foil and electrolyte,       high reliability and excellent cost performance have been achieved.       Our products are used for the equipment that requires a large capacitance such       as invereter and large power source.       Lead-free/Conforming to RoHS Directive.      3. Product line chart     CRART   Redial Type Aluminum Electrolytic Capacitor      1. Features        The HU type is the radial type products of 2,000 hours.       2. Product line chart    CRART   Snap Mount Type Aluminum Electrolytic Capacitor      1. Point of products        Snap Mount Type Aluminum Electrolytic Capacitors are used for switching power supply,        general inverters, UPS, etc. that require small-size capacitors with relatively large-capacitance.      2. Features       Through the self-development of high-quality anode foil and electrolyte.       our Snap Mount Type Aluminum Electrolytic Capacitors have achieved high reliability       and excellent cost performance.       Lead-free/Conforming to RoHS Directive.      3. Product line chart  CRART   Aluminum Electrolytic Capacitor for Photo Flash      1. Point of products        Hitachi stroboflash capacitors have been used for Digital Still Camera(DSC),        Digital single lens reflex camera(D-SLR), Medium Format Camera,        and others for professional studio, especially for the minifuarized applications.      2. Features       Hitachi stroboflash capacitors provide the high reliability and the excellent cost performance       with high-quality anode foils and electrolyte liquid which we have developed by ourselves.       All Hitachi stroboflash capacitors apply RoHS regulation.      3. Product line chart   CRART   Plastic Film Capacitors      1. Point of products       Plastic Film Capacitors with the high with stand-current performance of the conventional       capacitors for photo flashes are used now widely for general appliances, industrial equipment,       digital equipment, automotive electrical components, and hybrid cars which are required to offer       high reliability and long life.       At present, Plastic Film Capacitors are used only for automotive components such as HID lamp.       ECU for engine control which is required to offer high reliability, and smoothing capacitor for       hybrid car, DC/DC capacitor.       All products are environmental-conscious and comply with RoHS Directive.      2. Features       [MDD(5),MDD-HD(5Y),MDD-HD(4H),MDD-HD(4),MDD-HD(4HS),MDD-p(4) Series]       For PFC use only, Improve of pulse current resistance with the technology for Automobile       [MMX-E,MML-E Series]       Small-Size, flame-resistant epoxy resin encased       [MKC-JS]       High moisture resistant, small-size resin encased type, suited for automotive electrical       components       [MTB Series}       Special products such as high-frequency type and large-current type are available depending       on applications for general electronic equipment and industrial equipmen

VISHAY IrDA Transeceiver Rectifiers Small Signal Diodes Zener & Suppressor Diodes Capacitors - Tantalum, Ceramic, Film Resistors Mosfets RF Transistors Opto Electronics IGBT Modules 10KV Surge WWR Power Factor (PFC) Capacitor

A ceramic capacitor is a fixed value capacitor in which ceramic material acts as the dielectric. It is constructed of two or more alternating layers of ceramic and a metal layer acting as the electrodes. The composition of the ceramic material defines the electrical behavior and therefore applications. Ceramic capacitors are divided into two application classes: Class 1 ceramic capacitors offer high stability and low losses for resonant circuit applications. Class 2 ceramic capacitors offer high volumetric efficiency for buffer, by-pass and coupling applications. Ceramic capacitors, especially the multilayer style (MLCC), are the most produced and used capacitors in electronic equipment that incorporate approximately one trillion pieces (1000 billion pieces) per year.[1] Ceramic capacitors of special shapes and styles are used as capacitors for RFI/EMI suppression, as feed-through capacitors and in larger dimensions as power capacitors for transmitters.  

Radial / Axial / SMD / Motor starting capacitors Miniature / Subminiature constructions 85°C / 105°C temperature ranges 1000 hrs / 2000 hrs / 5000 hrs / 8000 hrs Low leakage / Low ESR types Non-polar / Bipolar types Snap-in / Lug type / Screw type terminals Taped / Bulk packing Please contact us for detailed specifications.

Rectangular box type. Self standing units. Modular construction with sheet metal enclosure.   Specification:Conformance to standardsIEC 831-1 and 2, IS 13340   Range:Single unit from 1 to 50 KVAr.   Available in three designs:ENDC:South India Marketing normal duty capacitor for normal inductive linear loads.EHDLL: South India Marketing Heavy DUTY Long life capacitor for loads exhibiting some amount of non-linearity, presence of harmonics, medium size industries.ESHDC:South India Marketing Super heavy duty capacitor for nono-linear arduous and flucluating loads with higher degree of harmonics.   Feature:Manufactured using multi layer MPP film with Heavy edge. Self healing property.Low energy consumptionDry type-freedom from oil leakageExplosion proof feature for individual cell using pressure sensitive mechanical interrupter.Simplified modular construction using hermitically sealed single phase basic capacitor cells.Easy and quick reparability at site.Inductor coil per cell for 6 kvar and above to dampen inrush current.

This series of Gem III is specifically designed for applications such as AC filters where harmonic frequencies greater than 60Hz are common. Application Data is provided starting on page 5 that gives the Equivalent Series Resistance (ESR) for these units. This allows the user to calculate the losses for each design/application and to ensure that they are kept within the permissible limits. Any questions regarding the suitability of a capacitor for a particular application may be referred to RBC Engineers through your RBC sales representative. Specification Available Capacitance Range: 2 to 120 μF Capacitance Tolerance: ± 6% Rated Voltage: See Rating Tables. Rating is the 60Hz RMS voltage for a sinusoidal waveform. Leakage Current: 30 μA maximum Frequency: 50/60 Hz. For higher frequencies refer to the Application. Operating Temperature: -40 °C to +70 °C Storage Temperature: -40 °C to +90 °C Operating Life: 60,000 hours with 94% survival Dissipation Factor: 0.1% maximum

We provide high efficiency Power Capacitor that is sourced from the Electronicon. Our wide range of Power Capacitor includes LVMV power factor correction, harmonic filtering, power capacitors, detuning reactors, power factor controllers and switching & discharge devices. Today, we have carved a niche as one of the key Power Capacitor Suppliers in India.

Modular and unit type versions of capacitors, upto 75 KVAR per modular unit Super tropicalised for ambients up to 55°C Vacuum oil impregnation with superior dielectric fluids,increases life of capacitors In-built protection against short circuit with unique pressure sensitive disconnector Power capacitors bear the ISI mark and are tested and certified to meet standards Easy servicability of capacitors at site facilitated by a simple crimp Best suited for APFC panels due to compact space saving design Unique 'CLAMPTITE' finger proof termination Wave cut film to ensure high inrush current withstand capability High life expectancy