Capacitors Dealers in Mumbai

A standard surge protector passes the electrical current along from the outlet to a number of electrical and electronic devices plugged into the power strip.

High Voltage Power Capacitors Are Manufactured With Hazy Film, Aluminum Foil And NPCB, Non-Toxic Oil. The Extended Foil Construction With Edge Soldering & End Folding Of Electrode Foil Is Added Feature. Units Up To 200 Kvar Are Offered Giving Benefit Of Kvar To Volume Ratio And Thereby Reducing Installation Cost And Space. High Voltage Power Capacitors are Used For Compensating Transmission Line Losses As Well As For Power Factor Improvement. Each Capacitor Unit Consists Of Number Of Elements In Series Parallel Combination With Internal Fuses. Each Element Is Wound With High Quality Hazy Bopp Film As Dielectric And High Purity Aluminum Foil As Electrode. Extended Foil Construction Is Adopted To Enhance The Life Of Capacitor. Normally The Electrode Material I. E. Aluminum Foil Has Sharp Points At Slit Edge Which Causes High Stress At The Sharp Points Causing Damage To The Capacitor. To Overcome This Phenomenon The Edge Of Aluminum Foil Is Folded Such That No Sharp Points Left Over. This Folding Forms A Ring Named As ‘Corona Ring’. After This, Capacitor Is Impregnated With NON-PCB, NON-TOXIC Bio gradable, Eco Friendly Oil Under Vacuum Which Enhances Life Of Capacitor.

we are offering electrolytic capacitors. an electrolytic capacitor is a type of capacitor that uses an electrolyte, an ionic conducting liquid, as one of its plates, to achieve a larger capacitance per unit volume than other types. they are often referred to in electronics usage simply as "electrolytic”. they are used in relatively high-current and low-frequency electrical circuits, particularly in power supply filters, where they store charge needed to moderate output voltage and current fluctuations in rectifier output. they are also widely used as coupling capacitors in circuits where ac should be conducted but dc should not. there are two types of electrolytic: aluminum and tantalum. electrolytic capacitors are capable of providing the highest capacitance values of any type of capacitor (see super capacitors) but they have drawbacks which limit their use. the standard design requires that the applied voltage must be polarized; one specified terminal must always have positive potential with respect to the other. therefore they cannot be used with ac signals without a dc polarizing bias. however there are special non-polarized electrolytic capacitors for ac use which do not require a dc bias. electrolytic capacitors also have relatively low breakdown voltage, higher leakage current and inductance, poorer tolerances and temperature range, and shorter lifetimes compared to other types of capacitors.

We are offering lv capacitor. Energe lv capacitors are suitable for use in ultra heavy duty pfc applications either fixed capacitor bank or apfc capacitor bank all polypropylene (app) type capacitors benefits improved power factor improved voltage quality compensate the reactive power reduced losses and investment

  CapacitorsWe supply and export comprehensive range of optimum quality capacitors. Our wide gamut is designed and programmed using latest technology to ensure durability and high stability. We also customize our range of components as per the client specification to meet the required results.    A capacitor (formerly known as condenser) is a passive electronic component consisting of a pair of conductors separated by adielectric (insulator). When there is a potential difference (voltage) across the conductors, a static electric field develops in the dielectric that stores energy and produces a mechanical force between the conductors. An ideal capacitor is characterized by a single constant value, capacitance, measured in farads. This is the ratio of the electric charge on each conductor to the potential difference between them.Capacitors are widely used in electronic circuits for blocking direct current while allowing alternating current to pass, in filter networks, for smoothing the output of power supplies, in the resonant circuits that tune radios to particular frequencies and for many other purposes. 

Oil Impregnated - to withstand higher voltages,Dielectric - Polyester, Electrode - Aluminium Foil, Coil - Non inductively wound, Leads - Radial Copper Wires, Solder Plated, Directly welded, Construction - Rectangular plastic box, Resin sealed, Markings - El-Ci-Ar logo, Capacitance, Voltage, Type Tolerance - 20%, 10%, 5%, Dissipation Factor