Steam Sterilizers Dealers in Chennai

HAC 2048 DD – Manual Double Door    Description Triple walled unit- the sterilizer consists of a chamber with steam jacket and outer insulation cover  Door: Single Door hinge type with radial locking system Door Gasket: Expandable type Silicone rubber gasket, withstands up to 140°C Material of Construction – Steam Sterilizer Chamber, Jacket, Door, Radial Locking Arm, Outer Insulation Cover, Pipelines, Steam Generator all are made out of heavy gauge SS 304/316 grade Stainless Steel Standard features: Multiport valve, vacuum drying, chamber condensate line with steam trap & chuck valve, dial thermometer, pressure gauges for steam generator and jacket, compound gauge for chamber, sight glass, stainless steel perforated tray, expandable silicone gasket Working Pressure: 1.2 kgf/cm & 2.1kgf/cm Power Supply: 440 V, 3 Phase, 50 Hz AC Supply Working Temperature: 121°C / 134°C Safety devices: Pressure switch, safety valves, self locking of door when chamber is under pressure, vacuumbreaker, low water level cut-off Safety features: Door locking facility, Low water protection system, Pressure cut off facility and other necessary safety features Hydrostatic test: Hydraulically tested chamber up to 2 times the working pressure and jacket up to 2.5 times the working pressure Standards: BIS – IS:3829 Latest Edition with ISI mark for High Speed Steam Sterilizers Documentation: User manual, Warranty Certificate, Hydraulic Test Certificate, Calibration Certificate

Description Triple walled unit, the sterilizer consists of a chamber with steam jacket and outer insulation cover � all are made of heavy gauge SS304316 grade stainless steel Steam storage � Subsequent sterilization can be in quick succession as steam generated is retained even when the load chamber is opened Standard features: Chamber condensate line with solenoid valve, steam release valve, pressure gauge, compound gauge, thermometer, sight glass, silicone gasket Drying system � Mechanical ejector system for drying the working chamber Safety devices: Pressure switch, safety valves, vacuum breaker, low water level cut-off Working Pressure: 1.2 kgfcm & 2.1kgfcm Working Temperature: 121°C 134°C Power Supply: 440 V, 3 Phase, 50 Hz AC Supply (Optional: 230 V, 1 Phase, 50 Hz AC Supply) Hydrostatic Test: Hydraulically tested up to 2.5 times the working pressure Features of Automatic Sterilizer: Manufactured in accordance with IS:3829 (Part 3) standards � for applicable models Automatic SIEMENS PLC based control system Sterilization pressure, temperature and drying time can be adjusted Automatic sterilization by pre-programming the cycle Digital display for pressure, temperature, power failure, low water, working time, end of sterilisation

Details Inner Chamber : SS 316 Steam Jacket : SS 316 Working pressure : 1.2kg/cm2 & 2.1kg/cm2 Working Temperature : 121oC / 134°C Mode of control : With a multiport valve / Automatic (PLC/SCADA) Gasket : Silicon Expansion type Door The Sterilizer is provided with Single or Double automatic vertical or horizontal sliding doors fabricated from SS316.   The door is with mineral wool insulation held in place by a stainless steel outer cover. The door sealing is affected with the help of a silicone door gasket. The gasket is pressurized by compressed air and retracted by vacuum. The door is moved vertically or Horizontally via a pneumatic cylinder. Compound gauges, for gasket pressure, with door status indications are provided on both loading and unloading sides.   The following door safety features are provided for maximum operator safety : Door inter-lock to prevent simultaneous opening of both doors. Process-lock to prevent opening of the door during the process. Process-lock to prevent the opening of the non-sterile door after successful completion of the cycle. Door obstruction safety. Insulation : The sterilization chamber is insulated with 50-mm thick mineral wool, which is held in place by an outer cover of SS 304.Vacuum Pump : A water ring vacuum pump is provided along with the system. This vacuum pump is used for creating vacuum in the chamber for mechanical air removal prior to sterilization and subsequently or post sterilization vacuum dryingSteam Condenser : The shell and tube type condenser fabricated from SS 304 is fitted in the exhaust/vacuum line to condense the steam before entering inside the vacuum pump. Vacuum Break Filter : A 0.2 micron vacuum break filter is provided on the sterile side for pressure equalization after vacuum creation.Piping : All process piping in contact with the chamber is fabricated from SS 316 with argon welding. All connections and fittings used are sanitary tri-clamp with silicone seals.   Valves : The process valves in contact with the chamber have SS 316 contact parts, are pneumatically actuated angle valves with Teflon seat and tri-clamp connections. The valves are actuated by instrument air controlled via solenoid valves.Instrumentation Safety Valve Vacuum Breaker Non - Return Valve Steam Trap Water inlet and Water outlet valves. Sequence of Automatic operation includes the following : Automatic water filling for the steam generator Vacuum Leak test. Bowie - dik test Gravity Displacement Program Spore - test results from approved lab submitted Pulsing (vacuuming, purging and pre-heating) Sterilization with temp and balance time displayed and data logged Exhaustion appropriate to liquid, instruments and fabric cycles. Drying cycle with vacuum pump.    Sterilization completes with F.O values Displayed and data’s logged. CGmp Documentation (DQ, IQ, OQ and PQ) will be supplied Optional : Fully Automatic Micro processor or PLC based programmable with solenoid valve operation. Suitable for Liquid, Instruments and Fabric cycle. Suitable SS Trolley and SS Carriage Data Logging System Single/Double Door System Vertical/Horizontal Sliding door Pulsing Controller A six point strip chart recorder

Sterilizer Is An Automatic High Temperature And Pressure Rapid Sterilizer Which Works With Steam As Medium. It Can Be Widely Used In Department Of Stomatology And Ophthalmology, Operating Room, Supply Room, Dialysis Room, Delivery Room & Other Medical Institutions. It Is Suitable For All Wrapped Or Unwrapped Solid Instruments, A-class Cavity Instrument (dental Handpieces And Endoscopes), Implantable Instruments, Dressing Fabric And Rubber Tubes, Etc. 

The easiest way to sterilizer. with its adjustable size, the philips AVENT 3-in-1 electric steam sterilizer takes up the least amount of kitchen space yet perfactly fits. 2 year warranty.

We are successfully engrossed in manufacturing and supplying exceptional quality  Laboratory Autoclaves  like portable autoclave, vertical autoclave, lab autoclave, etc. At our highly advanced manufacturing set-up, these autoclaves are manufactured by utilizing the best quality components and contemporary techniques under the visionary guidance of our talented professionals. The offered autoclaves find application in chemical laboratories for sterilizing purpose. In addition to this, clients can avail these  Laboratory Autoclaves  at reasonable prices from us.Features : Hassle free performance Sturdy construction High operational speed Low electricity consumption Construction : Double walled construction with boiler made of SS thick sheet. Outer shell is made of SS finished and Inner and outer chamber is fully made of SS also available. Lid is made of SS thick plate and is tightened all-round by wing nut locking system. Sterilizer is hydraulically tested up to 20 psi as safety measures and fitted with Neoprene Rubber Gaskets to ensure tight sealing. Autoclaves are fitted with pressure gauge, steam release cock, Spring – loaded safety valve that can set at any selected point 15psi to 20 psi +/- 3 psi and drain outlet.An ISI marked immersion type suitable rating element heats the water and steam to desired temperature and pressure. Supplied complete unit with Pedal Lifting Device, Perforated S.S Basket, and Wing Nut opener. Cord and plug to work on 220V, 50Hz AC Supply : Regular Working Pressure : 15psi Optional Accessories for the above Autoclaves extra cost : Automatic pressure control switch                                                      Automatic low water level cut-off device                                                               Automatic 0-60 minutes Electric                                                                           Digital Temperature Controller Cum Indicator with sensor Radial Locking System Automatic Timer 24 hours Range (0-9999)

High pressure water steam electrically heated vertical sterilizer used for sterilizing of surgical instruments. Dressing materials, Linen, Rubber, Plastic material, injection liquids by means of .steam under pressure of 15 to 2o PSI. (Adjustable) Triple chamber with inner chamber and steam jacket made of thick stainless steel jacket. All sterilizers are hydraulically tested up to 2.5 times of working pressure Outer chamber made of stainless steel sheet reinforced with M.S. sheet. Lid is made of thick stainless steel plate single piece and closed by wing nuts arrangement Joint less neoprene gasket does not allow any leakage. Fitted with double safety valve, Water level indicator, water inlet and Drain valves. Supplied complete with cord and plug but without dressing bins. To work on 220 volts, Single Ph, to Hz, Ac supplies. Available in following sizes Optional Accessories (1) Automatic low water level cut-off device. (2) Pressure control switch (3) Dressing bins

High Pressure Steam Sterilizer, Diathermy Pencil, Coated Paper, EC

Steam Sterilizers, Shakers, Autoclaves, Deep Freezers, Cooled Incubator

Steam Sterilizer, Sensor & Temperature Controller

Steam Sterilizers, Autoclaves, Laboratory Test Equipment