Steam Sterilizers Dealers in Mumbai

Our clients can avail from us a wide assortment of High Pressure Vertical Steam Sterilizers. The high pressure water steam autoclaves offered by us run on electricity and is extensively used for sterilizing the surgical instruments. Further these products are also applicable for dressing purposes in nursing home, hospitals and research laboratories. Features : All sterilizers are utilizing pressurized water attempted up to 2.5 conditions of working weight Outside chamber made of stainless steel sheet braced with M.S. Sheet Joint less neoprene gasket does not allow any spillage Fitted with twofold prosperity valve, Water level pointer, water cove and exhaust valves Given complete line and connection yet without dressing repositories

We are offering vertical sliding steam sterilizer. Sliding doors with interlocks superiorheat distribution band (within 1.0 celsius) inflatable gaskets for sealing unique auto drain facility drain line with condenser complete validation documentation including plc validation protocols as per gamp4 any tailor made sizes available pc based controls & data acquisition options available (scada)

We are offering horizontal sliding doors steam sterilizers.cgmp compliant on the lines of htm2010 and en285 specifications. Fully automated machines with plc. Vertical door movement with pneumatic cylinders geared motor. Positive door sealing with retractable solid silicon gasket. multiple point temperature monitoring and printing possible. Scada can monitor and control the process. Logging interval can be as low as 5 secs.

Model : HIPL – 001 A  Double body construction,  single chamber for steam and water, covered externally by outer shell.  Lid made of thick stainless steel, pressure upto 22 PSI factory set at 15 PSI.  Complete unit with automatic air purging, Digital Temperature control & Indication with 0.1°c Accuracy/ Resolution, with electronic Digital timer range 0 to 99 min.  Autoclaving time cycle automatically starts when set pressure is achieved.  Automatic steam release once autoclaving cycle complete.  Complete with pressure gauge, safety valve, steam release valve, extra safety valve.  Incorporated with an Automatic Pressure Control Switch as an additional safety device.  Low Water level cut-off : Low water level cut-off assembly connected to heater which automatically cuts off power to heater if water level is not sufficient thus eliminating heater burn outs.  Foot lifting arrangement included for Capacity 125 Ltr. and above. Not included/required for lower sizes.  Provided with S.S. L-304 grade perforated basket.  Unit works on 230 V Ac, 50 Hz.  Digital Temperature Indicating Controller with suitable sensor Factory set at 121oc [ 15 PSI ]  

INDO GERMAN research and development efforts resulted in good quality products with excellent and precise process control as per needs of customer and their level of satisfaction. The design of the machine is as per ASME standards. Steam sterilizers are available in different models and for the suitable applications. 1.Vertical sterilizers (Microbiology lab) with swing doors. 2.Horizontal cylindrical sterilizers (Microbiology lab) with conventional radial arm. 3.Horizontal rectangular sterilizers with conventional radial arm and also with sliding doors. 4.Bung processor cum sterilizer.

Capacity : 89 Litres – 8700 Litres   Steelco Sterilizers are engineered to offer best in class solutions for the reduction of energy and water consumption to give users lowest operating costs per load. Steelco is the ideal partner for the sterilization of glassware and other items used in laboratory activities or life sciences applications. Customers appreciate the versatility, intuitive functionality, high performance and reliability of the VS L Series. With an extensive range, models are available for any size facility.   Standard Compliance STEELCO steam sterilizers meet the applicable requirements of the following standards: 97/23/EC (PED) 2004/108/EC (EMC) 2006/42/EC Technical Norms and Standards: EN 285:2009 – CEI EN 61010-1, CEI EN 61010-2-040 – UNI EN ISO 12100 – EN 61326, EN 13445-3 annex B & C, EN 13445-3 Cl.18 – UNI EN 288-3 / EN 15614-1 – UNI EN 473 – UNI EN ISO 9712 – UNI EN ISO, 5817 – EN 10028-7 – EN 571-1 – EN 1435 A1 – UNI EN ISO 17637 – EN 287-1 – UNI EN ISO 15609-1 GAMP 5 (Good Automated Manufacturing Practice – Version 5) – ASME code Sec. VIII div 1 & div – NEMA 4X – UL Compliant – cGLP IQ/OQ Documentation and Execution, Temperature Mapping Test (PQ), GMP Package, FAT and SAT Documentation and Test provided.

Features Maintenance free. Contact Parts : S.S.304 / 316 Quality. In case of GMP complete S.S ( Material of Construction ). Models are available in Semi Automatic as well as Fully Automatic. Online Validation option. Double door, flush mounting with door interlocking systems. Safety Devices :- Pressure switch, Safety valves and self locking of door when chamber is under pressure. Vacuum Breaker for jacket. Steam Generator with gauge glass valves and low water protection.

we are the one stop destination in market for availing high quality tuttnauer steam sterilizers. Tuttnauer steam sterilizers is procured by us from reliable sources. High performance tuttnauer steam sterilizers offered by us is known for giving accurate results and is widely appreciated for this. Avail precision engineered tuttnauer steam sterilizers from us at reasonable prices. features : pre-set sterilization programs program and customize cycle parameters to meet your needs high precision control system for accurate sterilization results integrated printer for cycle documentation (optional) pc communication port enables storage of sterilization results temperature and pressure monitoring user friendly, intuitive display cycle information recovery in the case of power failure or cycle interruption insufficient water detector with automatic shutoff consistent monitoring of temperature and pressure for rea-l- time accurate results water-level sensors prevent cycle activation when insufficient water is detected in the chamber or reservoir safety and convenience features : seamlessly integrated into your work environment with compact design and heat insulationdurable 16l type stainless steel chamber and door with electro-polish finish double locking safety device prevents door from opening while chamber is pressurizedcontrol lock-out switch prevents starting a cycle if door is not properly locked door failure protection prevents door from opening at high pressure.

The NAT’s line of healthcare sterilizers are designed for hospital operating rooms, central sterile supply departments, ambulatory surgery centers, dental schools, and other clinical settings. European CE marked autoclaves come standard with vacuum, liquid, gravity and flash cycles to sterilize surgical instruments, utensils, gowns, wrapped/unwrapped goods and other healthcare instruments and supplies. All sterilizers are equipped with reliable non-proprietary components, maximizing “uptime” while providing an ultra low total cost of ownership. Autoclaves continue to be the first line of defense against infection and NAT takes this responsibility seriously.

We are a well-known electric Steam Sterilizer exporter from India. The interior doors of our dry steam sterilizers - S.S. 316 chamber with S.S. 304 jacket are well-equipped with special locking and sealing system. For the safety purposes, our dry steam sterilizer is well-endowed with self locking safety. We offer dry steam sterilizer at the most reasonable price. Product Code : 13 Salient Features S.S. 316 chamber with S.S. 304 jacket.Radial or sliding type specially designed doors.Interior doors with special locking and sealing system.Sturdy tubular mounting for the Equipment.S.S. 304 outer cover for insulation.S.S. 304 / S.S. 316 piping with specially designed Tri-clover end connector for the Equipment.Improved temperature uniformity inside the chamber reducing heat losses due to radiation.Prevents simultaneous door opening at a time when process is �ON�.Self locking safety for doors can�t open under pressure. Propack steam sterilizers are designed for best possible adaptation to the customer needs, and the regulations laid down for pharmaceutical products to meet c GMP norms. Propack offers maximum reliability in view of material quality, operations and performance of the equipment. The steam sterilizers can be operated using external steam or with built in steam generators depending upon the availability of the steam. Different cycles can be selected. Depending upon the product to be sterilized.

Detail Description   Newtech Equipments manufacture the broadest range of steam sterilizers (autoclaves) that is widely used in pharmaceutical, hospitals, biotechnology and allied industries, research institutes, food industry and laboratories. These are available in CGMP, GMP & STD designs, and are used for efficient & safe sterilization of ampoules, vials, rubber goods, empty flasks, instruments, utensils and fabrics. Moreover, these are available in various capacities ranging from 175 liters to 3400 liters. Salient Features Engineered and manufactured for regulatory compliance High performance. Ease of use. Reliability in service. Extended life and maximum value. Light, compact, portable, easy to use top loading autoclaves. Equipped with heat resistant handles and steam release/control valve. Inclusive of - inner & outer stand. Technical Specifications Heavy duty SS body designed to with stand 1.3 to 2.2 kgs/cm pressure. Single or double door, hinged or sliding type. With all safety interlocks. Steam heated by boiler steam or in built steam generator. Pre-validated control panel.

.Sterilization is a critical part of the manufacturing process . Sterilization as a process is governed by stringent conditions and standards set by regulating authorities and pharmacopeias .Pharmalab Sterilisation systems offer a wide range of process flexibility suited to customer requirements and are delivered as customised solutions

Multi operating valve, Quick drying apparatus, Accidental vaccum beaker valve, Plug screen, Ejector system , Chamber condensate line with steam trap & Check valve, Jacket condensateline with steam trap & check valve, Safety valve, Air valve, Vaccum breaker, Pressure guage, Compound guage, Dial thermometer, Baffle, etc.

Autoclaves (steam sterilizers) are used to sterilize surgical equipment, laboratory instruments, pharmaceutical items and other materials. They can sterilize liquids, solids, hollows and instruments of various shapes and sizes. Autoclave sterilizer features specifically designed to sterilize for lab applications used in laboratory, microbiology, pharmaceutical, food and chemical industries. They are designed to provide high quality repeatable performance and documentation for laboratory applications and quality assurance processes.   Autoclaves vary in size, shape and functionality. A very basic autoclave is similar to a pressure cooker; both use the power of steam to kill bacteria, spores and germs resistant to boiling water and powerful detergents. One of the things that sets steam autoclaves apart from other sterilizers is its automatic lock feature. Since an autoclave is a sterilizer, its purpose is like sterilizers-to kill or remove all forms of life on an object's surface such as bacteria, fungi, viruses, and spores. Autoclaves vary in size, shape and functionality. A very basic autoclave is similar to a pressure cooker; both use the power of steam to kill bacteria, spores and germs resistant to boiling water and powerful detergents. One of the things that sets steam autoclaves apart from other sterilizers is its automatic lock feature. Since an autoclave is a sterilizer, its purpose is like sterilizers-to kill or remove all forms of life on an object's surface such as bacteria, fungi, viruses, and spores. While autoclaves solely utilize steam to disinfect, other sterilizers can use chemicals, high pressure, filtration, irritation, or a combination of these methods to eliminate living organisms. Not all sterilizers can be autoclaves sterilizers because not every device can withstand the high temperatures needed to kill every organism. If someone was to use a different type of equipment the material could melt and morph making it unusable. An autoclave chamber sterilizes medical or laboratory instruments by heating them above the boiling point. Krew Instruments Pvt Ltd’s have tabletop as well as large autoclaves which can process numerous surgical instruments in a single sterilization cycle, meeting the ongoing demand for sterile equipment in operating rooms and emergency wards.

Steam Pressure Sterilizer, Dialyzer Reprocessing Machine, Video Gastroscop

An Autoclave is a device to sterilize equipment and supplies by subjecting them to high pressure saturated steam at 121 °C or more, typically for 15-20 minutes. In its most basic form the autoclave is a pressure cooker. Water is heated in a pressurized environment to create steam. Using pressure makes it possible to heat to higher temperatures with less energy. Autoclaves are usually made of steel and have various configurations for removing air prior to pressurization. Downward displacement autoclaves use gravity to remove air. Steam pulsing autoclaves use pulses of steam along with pressurizing and depressurizing to reach optimum pressure. Vacuum pump autoclaves suck air out for pressurization. Superatmospheric autoclaves are a combination of steam pulsing and vacuum pump techniques.Autoclaves are widely used in microbiology, medicine, tattooing, body piercing, veterinary science, mycology, dentistry, chiropody and prosthetic fabrication.

Steam Pressure Sterilizers, Sterilization Instruments, Anaerobic Jar