Testing Equipment Dealers in Jafferkhanpet, Chennai (83 products available)

Roughness Parameters : Ra, Rz, RY, Rq, Rt, Rp, Rmax, Rv, R3z, RS, RSk, Rmr Primary profile Profile recording magnification : Vv: 200x - 20000x Vh: 20x, 50x, 200x Display resolution : 0.001 µ m / 0.04 µ inch   Product Code : SAMS MTR - 022

• Brand Name: Embsys
• Warranty: 1yrs
• Country of Origin: China
• Frequency: 50Hz

• Country of Origin: Thaiwan
• Type: Digital Oscilloscope
• Certification: CE Certified, ISO 9001:2008

digital Storage oscilloscope Model : SDS1104X-E 100 Mhz,4 Channel

• Specification: Eazy Changeover AC to HWDC,Current Up to 6000 Amp AC/HWDC,Low voltage, High amperage transformer,Receptacle for Remote Magnetising,Built-in Over Heat Control Timer Circuit,Built for Tough Industrial Environment
• Industrial Applications: Surface & Near Surface Defects,Hairline Cracks,Test parts of variable sizes,Service Induced Cracks,Fatigue Cracks,Processing Defects

• Range: 4-5000 RPM
• Power Supply: 230V AC +/-20% 50Hz
• Pulse Ratio: Pulse Ratio (Optional)
• Input: NPN/PNP Proximity Switch
• Display: RED, 4-Digit, 0.4 , RED, 4-Digit, 0.56

• Load cell: 1kg capacity
• weight: 100gms. x 10 nos
• Indicator: 3½ digit display to read upto 1 kg
• Resolution: 0.01 kg
• Product Code: ELSHADDAI MTR - 005

We are supplying a comprehensive range of Flow Meter which is used for measurement of flow rate. The performance of the instrument is not affected by the properties of the material such as corrosiveness, viscosity, density, acidity and alkalinity. These flow transmitters accurately measure the flow rate of conductive liquids & slurries in closed pipes. Due to simple & rigid design the flow transmitter is an obstruction less & maintenance free instrument in place of conventional mechanical flow measuring. Features: Simple & cost effective construction Outstanding accuracy. Operates over wide ranges of temperature & pressure. Easy maintenance Specifications Process Temperature: 150 0C max, Process Pressure: 10 kg/cm2 max Operating Conditions: Temperature 0 to 55 0C / Humidity 5 to 95% non-condensing

• benefits: Transmitter with selectable signal outputs: analog output, pulse output, 2 switching outputs,Easy to install and to operate

In industrial companies, compressed air is an important source of energy, but one which can also incur high costs. Precise measuring and control technology creates transparency when it comes to compressed air consumption and can help you save energy, reduce costs and implement a targeted environmental management system (e.g. as per ISO 50.001 or ISO 14.001). The testo 6443 compressed air counter enables you to carry out accurate compressed air consumption measurements, consumption and leak monitoring and flow measurements in your compressed air system. The compressed air counter can also be used to carry out a peak load analysis in order to determine whether you are generating compressed air of sufficient capacity. Overall, these measures can help you find potential for savings or prevent unnecessary investment costs. Overview of the technical advantages offered by the testo 6443 compressed air counter The testo 6443 compressed air counter is also a transmitter, which converts the measured parameter into a standardized electrical signal. The transmitter can therefore be integrated into systems (e.g. compressed air systems), making it a key instrument in measuring and control technology. The testo 6443 compressed air counter also offers the following advantages: - Ultimate flexibility with a variety of signal outputs: analog output, pulse output, 2 switching outputs. You will therefore be equipped for any kind of application, whether that is consumption measurement, consumption or leak monitoring or even flow measurement - Integrated totalling function: the practical totaliser means that no additional analysis units are needed to calculate the total consumption

• Country of Origin: China
• Certification: CE Certified
• Warranty: 1yr

Battery Power backup Room Quality Sensor transmitter, which can detect temperature, humidity, PM2.5, PM10, Illumination, Pressure, TVOC, CO2, O2, H2, H2S.   Note: You can add or remove any parameters   Parameters   Power supply: DC 10-30V Maximum power consumption: 0.6W (24V DC power supply) Detection parameter: temperature, humidity, PM2.5, PM10, Illumination, Pressure, TVOC, CO2, O2, H2, H2S. Working environment: -10℃-55℃, 0~95%RH Signal output: WIFI or RS485 Product material: ABS Installation method: wall-mounted, ceiling-mounted   Datasheet - Air Quality Detector Detection parameters Range Resolution Accuracy Preheat time PM2.5 0~1000ug/m3 1ug/m3 ±3%FS(@100μg/m3,25℃,50%RH) ≤2min PM10 0~1000ug/m3 1ug/m3 ±3%FS(@100μg/m3,25℃,50%RH) ≤2min Temperature -40℃~+120℃ 0.1℃ ±0.5℃(25℃) — Humidity 0%RH-100%RH 0.1%RH ±3%RH (60%RH, 25℃) — Atmospheric pressure 0~120Kpa 0.1Kpa ±0.15Kpa@25℃101Kpa — Illumination 0~200000Lux 1Lux ±7%(25℃) — TVOC 0~60000ppb 1ppb 8%FS(@C2H6O,0.5ppm,25℃,50%RH) — Carbon dioxide 0~5000ppm 1ppm ±(50ppm+ 3%F·S) 2min O2 0~25%Vol 0.1%Vol ±2%FS ≥5 minutes H2S 0~100ppm 1ppm ±2ppm or ±10% ≥5 minutes H2 0~1000ppm 1ppm ±5%FS ≥5 minutes

• Type: Breath Alcohol Analyzer
• Certification: CE Certified, ISO 9001:2008
• Application: Alcohol Testing
• Color: Green, Grey, Light Green, Multicolor, Sky Blue, White
• Condition: New, Used
• Automatic Grade: Semi Automatic
• Power Source: Battery, Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Warranty: 1year, 2years
• Freaquency: 45Hz, 66Hz

• Type: Ph Meter
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White
• Voltage: 3-6VDC, 6-9VDC
• Display Type: Digital
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance

We are the main supplier of this product.

The laboratory has been set up for implementing related reliability testing for raw material and final products. According to the test reports of laboratory, decisions are taken for using materials in related project.

Based on order from the Navy, Data Patterns developed the complete Automated Test Equipment required for validating all the Line Replaceable Units (LRUs) utilized in the Seaking Helicopter. The upgrade was carried out at multiple Naval bases in India. This engineering effort was fully validated and approved by the Quality Control Agencies for testing the flight critical LRUs and functioning of the LRUs on the aircraft. Data Patterns is one of the few companies in the world who has carried out the implementation of a full aircraft LRU Test system.

• pH Range: 0 TO 14
• Type: Digital
• Item Code: AMP-PH
• Water Proof: No
• Type of PH Meter: Portable
• Brand: AQUASOL

We offer a large variety of water testing instruments. The digital water testing instruments manufactured by us are of best quality instruments, available in the market. Because of the elevated demand of water quality testing instruments in international market we are also major exporters from India. We provide field water testing kit which can test 14 vital parameters for drinking water & river water quality. These tests can be classified as Chemical, Physical and biological tests including coliform bacteria (which is accountable for causing water borne diseases). Physical - pH, Temperature, Turbidity Chemical - Fluoride, Chloride, Residual Chlorine, Hardness, Iron, Phosphate, Ammonia, Nitrate, Dissolved Oxygen Biological - Coliform Bacteria, Benthic Diversity These tests are founded on conventional laboratory methods. The kit offers quantitative and semi-quantitative results. Quantitative test includes hardness, chloride, dissolved oxygen and temperature tests. Semi-quantitative tests are used for remaining parameters using color comparison charts. The kit includes chemicals & accessories to conduct these tests. Some of the features of this kit are as follows: Easily carried to the field All tests can be performed at the site Various accessories provided like beakers, syringes, plastic trays, glass test tubes and gloves Self explanatory pictorial user̢۪s manual Field operational handbook

The MicroLite is an ideal solution for a variety of industrial cold chain logistics, requiring a small form factor USB data logger. Low cost, water resistant, multi-trip temperature data logger, with high resolution, 4-digit LCD display and direct USB connectivity – the MicroLite offers truly cost effective data logging. Accurate historical data indicator for an unbroken cold chain Six models offer a unit for every application Long battery life and 32K cyclic memory serve long haul transports Real-time LCD data display Dust and water resistant, depending on logger model License-free data analysis software The comprehensive MicroLite range allows organizations to select the unit most appropriate for their mission-critical environment:

Applications Battery chargers (Elmeasure has a unique option of reverse lock, in which charging energy can be accumulated by blocking discharging energy) Solar Energy measurements DC generators DC loads (like inverters, Telecom equipments etc.,) Elmeasure’s unique option the digital output can be utilized by the user to shut down loads/trigger alarms when ever voltage reaches below certain level or to switch OFF – ON charging circuit automatically   Single meter measures Multiple channels and True RMS measurements. Differential current input for all the current channels. Voltage Full scale programmable. Current full scale programmable independently. Reverse lock option for not accumulating the reverse current energy. This can be used for the better study of charging and discharging circuit. Programmable shunt secondary 50mV to 75mV. Auto-scaling of kilo & mega decimal point. Energy display programmable-counter based or resolution based. Energy resetting at 999999K* multiplication factor.     for EDC 4100     Displays Voltage, four channels Current, four channel energy in the bright single row 6 digits. Optional RS485/Zigbee communication Optional single digital output with the programmable delay   for EDC 4400   Displays Voltage, four channels Current, Watts and Energy. Optional Load hours (LH) and Amps hours (Ah). Optional RS485 communication. Optional two digital output with the programmable delay.      

The portable analog shore hardness testers are the most accurate and repeatable hardness testers available in the market. The R&D has helped in reducing the frictional force during the penetration of the indenter during the actual testing. The Spring used in the hardness tester has a very long fatigue life and the accuracy of the machine is maintained for a very long time with very less maintenance. The machine is ideally suited for checking the hardness of rubber and polymer components in the production line and the quality control laboratory. The machine can be supplied with a test stand, maximum indication pointer, pressure force limiting fixture etc. It is a very handy portable machine.

• Brand Name: Novus
• Type Of Data Logger: Digital Data Logger
• Display: No
• Parameter to be Monitored: Humidity, mA, Temperature
• Model: FieldLogger
• No. of Channels: Multichannel
• Protocol: Modbus
• Usage: Industrial
• Power Supply: AC power (100 to 240 Vac); Optional DC Power 19 to 30 Vdc
• Communication Interfaces: Ethernet RJ 45
• Communications: Modbus TCP/IP