Testing Equipment Dealers in Vadodara

The Meriam PIT5000 is the premier instrument for conducting and documenting pipeline hydrostatic pressure tests. This device replaces your bulky and fragile dead weight pressure testers, pressure chart recorders, and temperature chart recorders with a rugged all-in-one solution.   The PIT5000 incorporates our proven, NIST-traceable pressure and temperature measurement technology with our patented* system to provide reliable, automated data collection and storage of the following:   Pipe pressure Pipe and ambient temperatures Total pump stroke count and volume calculation Additionally, during the test, the PIT5000 provides you with the following visual assistance:   Real-time pressure and temperature plotting Real-time stroke vs. pressure plotting Real-time, configurable, alarm indicators   Test reports are automatically generated in two convenient formats, PDF and XLSX. The PIT5000 will pay for itself many times over by reducing time for set-up, tear-down and eliminating tedious, error prone manual data collection. In addition the real-time graphs allow you to see exactly what is happening, and focus on what is important, during the entire test process

We are offering co2 gas purity tester.wittemann specializes in the designing and manufacturing of co2 gas purity testers, which are designed by experts. The improvisation of many efficient features has made our co2 gas purity testers highly beneficial for various industrial applications renowned for : eliminating confusing cockshose connectionsawkward manipulationusual caustic spillagemaking gas testing simplecleaningproviding accuracy applications : industrial gas industrybrewing industrydistilling industrybeverage industry operating instructions : caution: caustic solution is used in the operation of this instrument. This solution may cause severe burns to the operator if not handled with care. Wear goggles and protective clothing while operating this instrument. preparation of caustic solution : a 20% solution of either potassium hydroxide or sodium hydroxide is recommended for air testing*. To make a 20% solution slowly add 100 grams of potassium or sodium hydroxide crystals to 500 cc's of distilled water and store in a sealed jar. The hydroxide solution may also be purchased from any laboratory or chemical supply company. *a weaker solution may be used, but the tests will take longer and fewer tests can be performed. how to operate : attach a hose from the co2gas supply that is to be tested to the nipple of the absorption burette. Use care when attaching the hose so as not to break the calibrated stem of the absorption burette. If using the 1/100th calibrated burette (10102) place your finger on top of the stem and push gently downward onto the support block to prevent the stem from breaking when attaching the hose. Make sure that the gas supply is regulated to below 10 psi before releasing gas into the purity tester.open both cocks (5005) and allow the gas to sweep through the absorption burette and caustic reservoir to completely displace air in the glassware. If preferred, the bulb may be first filled with water and the water displaced with the gas to be tested.after the sample has been taken, close the cock on the absorption burette first and then close the cock on the caustic reservoir.pour the caustic solution into the reservoir to the line indicated on the bulb (approximately 105 cc).open the cock on the caustic reservoir and allow the solution to flow down into the absorption burette. Absorption of the co2 gas now takes place until only air in the sample remains, the small bubble of which may be moved around by tilting the purity tester slightly, thereby insuring complete absorption of the gas.close the cock on the caustic reservoir and turn the instrument 90 degrees so that it rests on its other frame side. In this position, the unabsorbed gas enters the calibrated neck where the volume is directly indicated. The percentage purity of co2 gas is 99% plus 1/10 of 1% for each division as indicated by the level above the bottom graduation (using the standard absorption burette #10101). There are our other types of absorption burettes available which are listed below.after the test is completed, empty the caustic solution from the purity tester. Place the purity tester over a container and open both cocks to allow the caustic to drain out. Rinse out all traces of caustic with warm water and dry the glassware before returning the tester to its case. absorption burettes available part numbergraduated inscale101010.10%99 to 100%101020.01%99 to 100%101031.00%70 to 99%0.20%99 to 100%101041.00%50 to 100%101050.1095 to 100% click here for more information

Specialised testing such as Air Permeability, Water vapour permeability, Hydrostatic Headtesting, Textile Tensile testing, MMT, Washing & Fastness Testing, Flammability testing, Elmendorf Tear testing & many more by associating with renowned overseas principals. Through system commissioning, training and field service, we deliver expert, professional guidance and support. As you read this, thousands of ourproducts, systems & solutions are operating all over the world.

Tests 24V48V120V DC power sources up to 171 Amps Built-in digital meter with 1% full scale accuracy Rated for continuous operation, no cool-down period Master switch instantly applies removes loads Operates conveniently & quietl

Water testing equipment is used for sewage treatment is Submersible Mixer and it delivers high quality solution blending, mixing and suspension of solids in industry, municipal treatment plants and agriculture.

Our Electronic Energy Meter is a device that measures the amount of electrical energy consumed by a residence, business or an electrically-powered device. Digital Energy Meter is typically calibrated in billing units, the most common one being the kilowatt hour. In settings when energy savings during certain periods are desired, meters may measure demand, the maximum use of power in some interval. In some areas, the electric rates are higher during certain times of day, to encourage reduction in use. Also, in some areas meters have relays to turn off nonessential equipment. Periodic readings of electric meters establish billing cycles and energy used during a cycle. We are one of the most well known Industrial Energy Meter Suppliers in India. Features : Accurate MeasurementsCorrosion ResistantHigh Durability Click here for more Specifications

AM 3051 is ready for left- and right-handed use and is operated via capacitive keys. The newly designed metal bracket ensures a stable, balanced positioning of the instrument on the sample container. A new, improved adjustment routine enhances the reliability of results even at low measuring temperatures and alcohol concentrations.     

VAF Meter Applications : Control Panel Motor Control Centers Distribution Panels Genset Panels Plant Monitoring Control System VAF meter - VAF 36A (96mm x 96mm) 3 Ø (True rms) Voltage 3 Ø (True rms) Current Frequency Run Hour (Hour-Mins) RPM Programmable CT Primary, PT Primary & PT Secondary VAF meter - VAF39A (96mm x 96mm) 3 Ø (True rms) Voltage 3 Ø (True rms) Current Frequency Run Hour (Hour-Mins) RPM Programmable CT Primary, PT Primary & PT Secondary

Tubular Level gauges are simple reliable device for direct reading in atmospheric or pressured tank application. It has mounted parallel along the side of tank, and gives local liquid indication in the transparent glass tube as the process level fluctuates. Gland packing design provides tension free tube installation to achieve zero leakage and also enables glass removal for replacement or cleaning without dismantling of tubular gauge. Auto-shut of ball check valve arrangement provided for preventing liquid loss during glass breakage.

The unique Top Mounted Magnetic Level Indicator provided by us, has been very popular among our clients because of the unique design features. Fabricated from quality raw materials, the Top Mounted Magnetic Level Indicator has been listed among the best available level indicators.

The water column type consists essentially of a stainless steel flanged cylindrical vessel with cover assembly, incorporating the measuring cylinder, pressure gauge and valves. Supplied complete with hand pump and calibration cylinder apparatus which is essential for adjustment to site barometric pressure. The cylindrical vessel of all models can also be used as unit weight measure for fresh concrete for density determination.

This is a cheap digital multimeter of a decent quality. This multimeter is capable of doing DC and AC voltage measurements DC current measurements Resistance measurements Audible continuity measurements Transistor hFe measurement etc… This multimeter works of a standard 9 V battery hence battery replacements should not be a problem as these batteries are easily available.

The OhmGuard® hose continuity tester is designed to test hoses used on vacuum trucks and tanker trucks prior to the transfer of flammable or combustible products. The OhmGuard verifies that the electrical conductivity of the hose is functioning correctly, thereby ensuring static electricity is not permitted to accumulate on the metal components of the hose and eliminating the risk of a fire or explosion caused by the discharge of a static spark. The OhmGuard is easy to operate, does not require any specialist driver training and will indicate, within seconds, if the hoses are safe to use. The driver simply connects the OhmGuard’s cable to a junction box situated on the truck and connects the OhmGuard clamp to the last hose coupling as illustrated. The green LED housed in the OhmGuard will pulse continuously if the hose has an electrical continuity of less than 100 ohms with the truck.