Testing Equipment Dealers in Kolhapur (69 products available)

We are a manufacturer, supplier and exporter of Compaction Testing Apparatus in Kolhapur, India. Our experienced team of professionals ensure that the wide range of compaction testing apparatus offered by us are designed and manufactured as per the international quality standards and norms. They are widely demanded as it helps to eliminate tiring hand compaction processes in factories. We provide the orders in safe packages with no scope for complaints. Specifications : RSI-026 Compaction test apparatus, IS: 2720 (P vii & viii), IS: 10074; BS: 1377, ASTM D 698, D558, D559, D560,D 1557, AASHTO T99,T 134. Proctor Mould 100 mm ID x 127.3 mm ht x 1000 c c volume with collar & base plate. Made of M. steel. Complete with Rammer 2.6 or 2.5 kg. Proctor Mould made of Gunmetal with rammer Proctor Mould 150 mm dia ID x 127.3 mm ht x 2250 c c volume with collar & base plate. Made of M. steel. Complete with Rammer 4.89 kg or 4.5 kg. Heavy compaction (Modified) Proctor Mould but 150 mm dia but made of Gunmetal with rammer. Spare Proctor Mould 100 mm I .dia x 127.3 mm ht x 1000 cc with collar and base plate. Mild steel. Proctor Mould made of Gunmetal. Rammer 2.6 kg or 2.5 kg for light compaction. Rammer 4.89 kg or 4.5 kg for heavy compaction, modified.

• Width: 405
• Depth: 300
• Height: 115

Consists of single pan balance, spoon, 500 gms.of absorbent compound in air tight bottle, moisture meter capacity 10% max. Wooden carry case. To Determine the moisture content quickly in fresh sand and moulding sand.

ARUN Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc.These testers strictly confirms to IS : 1586-2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 -2005, ASTM : E 10 for Brinell test.

Association with trusted vendors enabled us to meet the quality expectations of the clients. We source only premium-grade raw materials from the reliable sources after complete checking. Being a reliable name in this arena, we make sure that the payment procedures remain secured with us. In addition, we issue invoice to the clients stating all the relevant information of the products.   Specifications Conforming to specifications and tolerance in accordance to I.S. 2720 Part VII To determine the water content level after which any further reduction in the water content will not cause a corresponding decrease in the volume of the soil mass Consists of:Porcelain evaporating dish approx 12cm diam Shrinkage dish of monal metal 45mm internal diam X 15mm high.Glass cup 50 to 55mm diam X 25mm deep.Perspex prong plate with three metal prong.Perspex plate plain 75mm square. Spatula 20mm width and 80mm long made of stainless steel with wooden handle. Glass measuring cylinder 25m1 X 0.5 ml graduation.Mercury in bottle 500 gms.

We are offering our client an excellent quality range of Electronic Extensometer Tester. These Electronic Extensometer are made from very high quality raw material which ensures high durability at its user end. These Electronic Extensometer are in high demand in the market. Different sizes and designs are easily available in the market. Our Electronic Extensometer are available at industrial leading prices.

• Type: Hardness Tester
• Color: Blue
• Voltage: 220V
• Frequency: 60Hz
• Power: 1-3kv, 3-5kv
• Warranty: 1year
• Automation Grade: Automatic
• Application: Labouratory Use
• Feature: Durable, Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working
• Temperature: High Temperature, Low Temperature

• Model: B - 3000 [ O ]
• Loads - kgf: 250 to 3000 in stages of 250
• Initial Load - kgf: Nil
• Max. test height - mm: 380
• Dept of throat - mm: 200
• max. depth of elevating screw below base ( approx. ) - mm: 180
• Machine height ( approx )  - mm: 1185
• Net Wight ( approx )  - Kg: 500
• Drive motor - HP: 0.33
• mains supply - V/cy/ph: 415 / 50 / 3
• Optical Device: Direct reading optical device with 14 x magnification.  
• Model: B - 3000 ( O )
• Testing Table 200mm dia: 1 pc.
• Testing table 70mm dia with 'V' groove for round jobs 10 to 80mm dia.: 1 pc.
• Ball holder 5mm: 1 pc.
• Ball holder 10mm: 1 pc.
• Test Block HB-5/750: 1 pc.
• Test Block HB-10/3000: 1 pc.
• Brinell Microscope: Nil
• Allen Spanner: 4 pcs.
• Telescopic Cover for elevating screw protection.: 1 Set
• Instruction manual: 1 Book

• Automation Grade: Optical measurement
• Brand Name: Akuracy
• Material: Mild Steel
• Finishing: Anti corrosion, super hydrophobic Paint,
• Driven Type: Electro-hydraulic
• Color: White And Blue
• Power: 1-3 Kw
• Operating Type: Semi Automatic
• Usage: Hardness Testing, Laboratory, Steel Industry
• Certification: ISO 9001:2008 Certified

In order to keep the quality of the products up to the mark, we check the entire range against varied quality parameters. Now purchase Clamp Meter at highly affordable prices from us. We are its well-known supplier in the country.

• Brand Name: Finder, Acme, Fuji etc
• Application: textile, printing, Food
• Model Number: as per requirements

We can supply Signal Isolators, DC Dc Convertors, Panel Accessories such as Fans, Filters, Thermostats, climate control units, Relay Modules , Cable and cable accessories

The machine is designed to carry out compression tests on materials like concrete, cement as well as finished products like tiles, bricks, blocks and other relevant materials. The machine can be used for quality control departments, civil test laboratories, engineering colleges And are adeally suitable for on-site testing for quality control and/or laboratories.   We Upgrade all types of imported testing machines like INTRON, ZWICK, TIRA, HONSFIELD,UNITED and Indian like FIE, FSA, STAR etc, with following advantages :-• Machine becomes computerized with digital load indication in kg / N / Mpa with real time graph on PC • Avoids tedious evaluation of proof stress. Gives 0.1 - 1% proof stress values & stress / stress graph• Plot of Load vs % elongation for elastic materials for rubber / plastic using our Long Travel Ext’meter• Highly accurate. No manual Intervention. Totally error free working.• Mechanical working ( with dial ) of machine remains unchanged and can still be used.Why MCS make Universal Testing Machines? :-• Up to date knowledge of all the latest Indian & International testing standards and ability to implement in the machines / software supported by  strong in-house R&D setup.• Future proof indigenously designed hardware/software, sensors, extensometer, control panel• State of the art manufacturing facilities supported by excellent after sales support• Installed our systems / packages in more than 40 NABL accredited Laboratories in India. We supply testing machines for testing of materials like steel, cement, copper & ACSR conductors, cables, polymers, rubber, insulators, ceramic, glass, plywood, fastners, wire / nylon ropes. We look forward to have an opportunity to serve your company in near future.Technical Specification :-Automatic Compression Testing Machine ( ACTM )Computer-controlled using EIA-485 communication standard. Online plotting of runs being taken by the ACTM Advanced data acquisition, analysis and report generation ACTM software tool with run database management.Digital Display Unit ( DPU )Dynamic display of pace-rate on a LED bar-graph for monitoring the quality of control. On-board memory for storing up to 250 runs. Auto-shutdown when the sample breaks or the maximum load is achieved. Independent LVDT attachment.Micro-Controlled CTM ( μCTM )Intelligent DSP-based Pace Rate Controller. Digital PID feed back control with high torque stepper motor as an actuator. Fully configurable feedback control parameters. Automatic Load Hold and Resume facility. Facility for user-defined pace rate in kN / mm.User InterfaceFront panel LCD for status & menu displays. 4-digit indicator for load (kN) & strain (mm) display selectively. LED Bar graph for pace rate quality monitoring. 8-button front panel keypad.Hardware FeaturesAccurate pace rate control through DSP-based feedback.Data integrity & validation facility for calibration data. Precision pressure & strain sensing using 16-bit ADCs. Rugged military-grade back panel connectors suited for demanding on-site conditions. EIA-485 to EIA-232 converter module.Data AcquisitionOnline run data acquisition & plotting. Advanced Graphical User Interface. Multiple logins & selective access control.CTM models comparison chart. Analysis and Report Generation

We are a reliable manufacturer, exporter and supplier of computerized brinell hardness tester model no. - kb-3000 (hpc) worldwide. Our computerized brinell hardness tester model no. - kb-3000 (hpc) is an electrically operated hardness testing machine that is highly suitable for mass testing of components made of steel and other materials whether flat or round. A power pack and hydraulic system is also provided with our computerized brinell hardness tester model no. - kb-3000 (hpc) for easy loading and uploading operations.

Avail from us highly reliable Vickers Hardness Testers for meeting varied testing requirements. The Vickers Hardness Testers, we offer, are made using advanced technology and offer great contribution in carrying various testing process swiftly. Available in diverse specifications, the Vickers Hardness Testers offered by us can be availed at market leading price from us. Our Vickers Hardness Testers Are Demanded By Engineering industryAutomobile industryPharmaceutical industryLaboratory and foundries Features Test loads 5, 10, 20, 30& 50 kgfMagnification of optical projection 70XLoad selection just by manuallyCapacity-Throat 135mm Max. Test height 200mmScale leap count 0.001 mm

• Test loads-: 5,10,20,30,50kg. 1kg (Optional)
• Magnification of optical projection: 70x,140x (Optional
• Maximum test height (mm) -: 200
• Scale Least Count (mm) -: 0.001
• Throat Depth (mm) -: 135
• Machine dimension (mm): L585 x W290 x H860
• Weight (approx) -: 70kg
• Power supply: 220 VAC, 50Hz, 1-Phase

Features : Very wide testing range from soft metal like lead up to hardest metals like hardened steel. Small indentation to allow testing of precision finished parts. Motorised loading and unloading. Suitable for thin sheet metals since test loads are very small. Built - in projection screw to get accurate results. Auto Instruments & Engineers Vickers Hardness Tester is a simple & accurate means to produce and measuring the diamond indentation.These testers are suitable for measuring the hardness of precision metallic parts with wide testing range-from soft to hard, and their accurate results are widely acclaimed. These testers strictly conform to IS: 1754 - 1986 Construction :The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen. Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetrator by means of automatically. The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen. The diagonals of the indentation are measured by means of the micrometer screw of the projection screen    

• Feature: These machines come in three basic versions.i.e.Pure rockwell models,Rockwell cum Rockwell Superficial models and Rockwell cum Brinell models.

    Krystal hardness Testers are designed and developed after years of experience in this field.All models are manufactured under strict quality control at all manufacturing stages.   All these models are suitable for testing hardness of Metals and alloys.   All types of shapes, i.e.Round, Flat, and other irregular shapes like castings etc. can be tested on these machines. All relevant fixtures can also be supplied.   These Testers are simple in design, easy to operate and maintain.   All Krystal make hardness testers meet relevant National and International standards like BS 819 part I & II, ASTM- E18, ASTM - E10 etc.

Proving our dominance in material testing machines domain, we have formed tie-ups with reputed and prestigious organizations, defense labs, research institutes, metallurgical labs, engineering colleges and steel industries in India and abroad.

Rockwell & Rockwell Superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value. Test Force Selection by external dialing.

We are manufacturing new advance adjustable mobile radiation tester, and also radiation releted product ,chip

K3MA-F - Frequency Rate Meter. Intelligent digital panel meter with contact, NPN, PNP or voltage pulse input. Highly visible backlit LCD with programmable display colors. K3MA-F K3MA-J - Process Meter. Intelligent digital panel meter with multi range of DC voltage current input. Highly visible backlit LCD with programmable display colors. K3MA-J K3MA-L - Temperature Meter. Wide selection of inputs from thermometers to thermocouples. Highly visible backlit LCD with programmable display colors.

• Brand Name: Motwane
• Model Number: LR 201
• Voltage: 9 V
• Battery Life: 6 Month

Our policies regarding payment are simple and quick. We have ethical business standards, and we make sure our patrons can make payment securely along with documentation. If you are interested in obtaining sand testing equipment at market leading prices, we are its responsible and responsive suppliers.

• MODEL NO: RASN (E)

  Test Loads - 60, 100, 150 kgf for test on Rockwell A,B,C scale. Loading/Unloading, Cycle automatic by a push button operation. Raising/Loaring of elevating spindle - manual. Electronic Digital Readout with 0.1 Rockwell resolution. Go-nogo facility with presentable and higher limits. Optional - printer facility Capacity - Throat - 133mm, Max test - 230 mm

• Features: True four Quadrant Metering,Import/export metering and forwarded metering option for LT/HT systems
• High Voltage& EHV: Open Access, Wind/Solar & other generation plants, Co-generation plant , hydro generation plant , 
• ELSTER: A1800 Alpha
• Industrial / Commercial: 0.2s
• As per MSEDCL / MSETCL and  Electricity Board Specification: ABT Import Export Meter

• Type: Sand Testing Equipment
• Weight: 1000-2000kg, 2000-3000kg, 50-100kg, 500-1000kg
• Color: Blue and white
• Voltage: 230V
• Condition: New
• Capacity: 100-200kg/h
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw
• Warranty: 1 Year
• Driven: Electric, Pneumatic
• Motor Type: AC Motor
• Country of Origin: India
• Brand Name: TECHNOSTAR
• Material: NA
• Application: Foundry lab
• Standard: IS