Testing Equipment Dealers in Thane

We are one of the respected names engaged in the process of supplying quality i-12 Digital Insulation Tester at nominal rates. Rest assured for the safety of the products as we have the best facilities at our end. In addition, we have appointed a responsible staff to keep a vigil eye over the same. Features: Advanced technology Precision made Long life & sturdy

Sparklet Skid Mounted MultiPhase Flow Meter + Flow Computer are been used for Testing of New or Existing Wells to know the performance i.e. GOR, Oil Flowrate, Water Flowrate, Density, Composition of Gas and other few parameters to know the behavior. Purpose and Application. According to the Oil Reservoir Conditions and Client Requirement the above equipment can be provided in order to meet the well testing service in the Oil And Gas Fields.

The Motor Test Bench is a desk type panel interface provided by Prolific for Motor testing. It houses test instruments, selector switches, PBs, indicators, meters and computers. The test engineer can exercise control through the test bench and can monitor various parameters related to testing equipment such as HV Tester, MG Set, Isolators, Breakers, and many more.The above functionality is made more sophisticated with the use of a PLC and LCD touch screen based HMI. When the PLC and HMI are used; discrete indicators, meters, SS and PBs become redundant. SLD of the whole power circuit then can be visualized and controlled through the HMI.

The FC10 Portable Breath Alcohol Tester is the true workhorse of breathalyzers. Widely used by Law Enforcement and Corrections the FC10 combines high precision, ease of use and ruggedness with affordability. The Lifeloc FC10 includes direct BAC testing and passive alcohol screening in one instrument. Passive testing does not require a mouthpiece and is perfect for rapid "zero tolerance" alcohol screening of subjects and "sniffing" of open containers. Known for its long life and fast recovery times, the FC10 is likely the only breath alcohol tester you will ever need..

This tester is useful to test exchange and subscriber side of the line. On the exchange side, we can check exchange voltage and dial tone. On the subscriber side, we can check the presence of ac voltage, battery, earth, short-circuit and condenser click. We can also ring the subscriber and talk to them.

EXAIR’s Digital Flowmeter is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used downstream. This makes it possible to save thousands of dollars per year in compressed air waste – helping to identify costly leaks or inefficient air products. Many companies install the Digital Flowmeter on each major leg of their air distribution system to constantly monitor and reduce compressed air usage.   Advantages • Easy to install • Summing Remote Display And Data logger Available • No Moving Parts • Sensitive At Low Flows • No Calibration Or Setup required • Includes All Components For Installation • Model From 1/2" to 4 Schedule 40 Iron Pipe in Stock • Model Are Available For Sizes 1/2" to 6" in Iron Pipe • Model Are Available For Sizes 3/4" to 6" in Copper Pipe

Digital Izod/ Charpy Tester - Model: AE-ICT-D Results visible on controller display. Report consists of as per ASTM, ISO & IS. Machine Capacity – Up to 25.00Joules Five individual Scales as mentioned. (or as per customers requirement)a. H1 : 0 – 2.000 Jb. H2 : 0 – 5.000 Jc. H3 : 0 – 10.000 Jd. H4 : 0 – 20.000 Je. H5 : 0 – 25.000 Je. H5 : 0 – 25.000 J Results on direct display in J/m; Kgcm/cm; J/m²; J/cm²; Kj/cm² Supply – 230 VAC ± 10 VAC/ 50 Hz. Paint – Powder coated

We are offering stiffness tester. precision instrument evaluates material stiffness. the taber stiffness tester utilizes a two directional pendulum-type weighing system to evaluate material stiffness, flexural strength, resiliency and elasticity properties. Force is applied to the lower end of the specimen by a pair of rollers attached to the driving disc. the resulting torque tilts the pendulum from its vertical position and a taber stiffness unit reading (g•cm) is taken automatically when the pendulum mark aligns with the appropriate driving disc mark (71/2° or 15°). Predetermined sample length, deflection angle and rate of loading provide accurate and reproducible test results. onboard computer automates testing. a high resolution optical encoder and a non-contacting photo sensor are incorporated to make this instrument fully automatic. the onboard computer calculates and records testing data (average; standard deviation; high/low; time; date; and a user-defined label), and converts stiffness readings to the appropriate user selected stiffness range. Test results are displayed on a 4 x 20 character display screen, and can be printed, stored or downloaded to a pc. test a wide range of products. nine distinct setups permit the testing of very delicate to extremely rigid materials. Taber stiffness testers will evaluate paper, light metallic foil, laminated plastic, cardboard, wire, and other flexible materials up to 5.5mm (0.219 inches) thick that do not exceed 10,000 taber stiffness units.

We are leading Tearing Strength Tester, Manufacturers, Suppliers & Exporters Located in Dombivli Dist. Thane, Mumbai India. As per ASTM standards is suitable for most fabrics including woven, layered blankets, napped pile, blanket, and air bag fabrics.   This method covers the determination of the average force in grams per specimen required to propagate tearing through a specified length of plastic film or no rigid Sheeting. Two specimen are cited, a rectangular type and one with a constant radius testing length.   → Grippers → 1600 Sector → Pointer → Sector Lock → Sturdy Base → Adjustable Footrest → Counter Weights → Scale   Significance : This method is of value in ranking relative tearing resistance of various plastic films and thin sheeting of comparable thickness. Experience has shown the test to have its best reliability on relatively less extensible films and sheeting. Variable elongation and oblique tearing effects on the more extensible films preclude its use as a precise production control tool for these types of plastic.   → Capacity : 1600gms; 3200gms; 6400 gms; → Clamping surfaces of each clamp : L-35.5mmxM-15.5mm → Distance between clamps : 2.5 +/-0.25mm → Tearing Distance : 43 +/0.15mm → Slit Size : 20mm → Scale Reading : 0 to 100% Range → Calibration check weight: At 1600gms: At 3200gms. : At 6400gms → Standards : D-689 ;BS 4153; ASTM D1424; DIN 53862; M&S 29    

The Jolt Test Apparatus Offered By Us is Used for Testing Purposes in Explosive Manufacturing Packaging Industries. the Jolt Test Apparatus that We Offer Helps in Establishing the Ruggedness as Well as Safety of Fuze Designs Even During the Adverse Conditions.