Testing Apparatus Dealers in Thane

* Sterility Test Unit 47mm Stainless Steel (3 Branch Sterility) 47mm Stainless Steel (6 Branch Sterility) * Oil Free Vacuum Pump suitable for above sterility Model - SAV - 75-S Max.Flow - 45LPM, Vacuum - 27" Hg (680mm)

This test method describes the measuring and observing the relative amounts of smoke obscuration produced by the burning or decomposition of plastics. It is intended to be used for measuring the smoke producing characteristics of plastics under controlled conditions of combustion or decomposition. The measurements are made interns of the loss of light transmission through a collected volume of smoke produced under controlled, standardized conditions.

Features > Ideal for checking sealing integrity of blister, strip and pouch packs capped bottles etc.> Extremely compact construction> Very low noise level> Polycarbonate vacuum desiccators sustain vacuum for long time> Stainless steel (GMP) construction> Built in vacuum gauge and isolation valve> 0-5 minutes timer for auto-stop> Vacuum level up to 550 mm of hog Specifications

Jumble Test Apparatus that is Dimensionally Accurate and is Used for Varied Testing Purposes. the Jumble Test Apparatus that We Deal in is Comparatively Larger Than the Dimensions of the Fuze Because of Which the Fuze Can Freely Jumble in the Metal Box that is Lined with Wood.

We are manufacturers and exporters of Slump Cone that finds application in determining the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38 mm. This equipment consists of one slump cone with handles and foot pieces and ensures hassle free performance at all levels of operations. Technical SpecificationThe slump cone has internal dimensions 20 cm dia at base 10 cm top dia and 30 cm height Foot pieces can be fixed to the clamps on the base plateThe base plate has lifting handle for easy transportationOne graduated steel rod 16 mm dia x 600 mm long, rounded at one end and graduated in mm, is also supplied

For immaculate quality Cloud and Pour Point Test Apparatus, you can contact us. We are nonpareil Manufacturer, Supplier and Exporter of Cloud and Pour Point Test Apparatus in Maharashtra, India. The Cloud and Pour Point Test Apparatus we make available has four compartment units with built in digital temperature controller cum indicator. Our Test Apparatus is provided with individual ON/OFF switch and controlling facility for each and every section.

Products - Digital Friability Apparatus (Single/ Double Drum) Measures Obsession Strength of tablets with programmable timer. Rotation Speed 25rpm ±1, auto & manual mode on 3 digits LED display and it has a 3 digit presentable control.    

complete automatic system.
display indicates set and actual vacuum level.
vacuum level can set as per requirement up-to -600 mm hg.
settable retention time, start delay time and vacuum hold time.
automatic release of vacuum pressure.
alarm indicates the test over.
incorporated with inbuilt diaphragm (oil free) vacuum pump.
print facility (parallel interface for dot matrix printer).
20 x 4 alphanumeric informative lcd screen.
4 x 4 matrix self explanatory key board.

The Ray-Ran Test Sample Injection Moulding Press has been specifically designed to produce a wide variety of laboratory test samples such as colour plaques, tensile and impact test specimens as well as small components required for mechanical testing procedures. The unique low cost moulding machine has a compact design for vertical bench mounting making the apparatus ideal for Research and Development Institutes, Universities, laboratories and small workshops. The apparatus is pneumatically operated with inlet air pressures up to 10 bar (150 psi) which is adequate for moulding most materials including Polypropylene, Polyethylene and PET with injection pressures up to 450 bar (6500 psi)Digital temperature control up to 400 deg C melts the polymer which is then extruded into the mould. Digital tool block heating is included for more efficient polymer flow into the mould with temperatures up to 200 deg C to prevent freezing.The apparatus is supplied with a quick release cam operated tool block which will accept low cost tool inserts machined to any shape that will fit within the Standard Tool Block parameters. This makes the apparatus ideal if different samples are required from the same material with minimal wastage and time. Tool Inserts to suit any International Standard, e.g. ASTM, ISO, DIN, JIS, etc., can be supplied for tensile dumbbells, colour plaques, impact bars, etc. For samples that cannot be easily moulded within the standard tool block, optional specialised tooling can be supplied to customers requirements within the parameters of the machine.The unique interchangeable Cylinder Liner and Die assembly supplied as standard with the apparatus compliments the simplicity of the equipment during and after the moulding process as it enables the operator to change from one colour or material to another in just a few seconds, increasing production and eliminating the need for purging. Simply remove the cylinder liner being used and replace it with a clean one, wait for it to reach temperature, fill the liner with your new material and continue the moulding process. The used liner can then be cleaned at the operator’s convenience using a dedicated cleaning solution or ultrasonic cleaning bath. The 47cm³ capacity of the cylinder liner ensures multiple moulds can be made saving time and reducing valuable material wastage.To mould a test sample polymer is loaded into the top of the liner which is heated to the required temperature to plasticise the polymer. When the injection piston is released the cylinder liner nozzle automatically locks into the injection gate of the tool block and the piston extrudes the polymer into the moulding plate insert. After the polymer has been allowed to set for a few seconds, the tool block cam is released and the moulding plate insert withdrawn. The moulded test sample is then removed, the injection gate is cleaned of any residual polymer and the moulding plate insert replaced and clamped in the tool block ready for the next sample to be moulded. For a more convenient flow of polymer into the cylinder liner an optional polymer feeder hopper can be supplied so the liner is always topped up after each mould is produced ensuring a countless moulding process. Technical Specification Pneumatically operated Maximum Air Line Pressure: 150 psi/10 bar Maximum Polymer Pressure: 6500 psi/450 bar Maximum Shot Size: 47cm³ Maximum Sample Sizes 175mm (L) x 45 (W) x 12.7 (T) Digital Temperature Control Automatic Nozzle-to-tool Locking Device Cam-lock Tool Block Quick Change Cylinder, Nozzle & Die Visual alarms for Tool Locking 110v 60hz and 240v 50Hz Product user manual Traceable calibration certificate CE declaration certificate Optional Ancillaries Polymer Feeder Hopper Low cost moulding Inserts available to all International Standards Quick Change Cylinder, Nozzle & Die Air compressor Non standard tool block

Testing Apparatus, Cathodic Disbonding Apparatus, Lumen Test Apparatu

Dissolution Test Apparatus, Dissolution Testers, Melting Range Apparatu

Ablet Physical Testing Apparatus, Tablet Dissolution Apparatus, Foo

Bitumen Testing Equipment, Soil Testing Machine, Aggregate Testing Equipmen

Automated Test Equipment, PCB Screen Printer, ESD Sticky Mat, Curing Ove

We are offering best bitumen testing equipment

Leak Test Apparatus, Dry Bath, Blood Bank Scale, Autoclave, Bod Incubator

Digital pH Meter U. V. Cabinet Leak Test Appa