Testing Apparatus Dealers in Bangalore

• Material: Stainless Steel
• Application: Laboratory
• Warranty: 1yrs

Application Useful as a preliminary screening test for solid substances. In view of the complex nature of the ignition and combustion of solids, the self-ignition temperature determined according to this test method should be used for comparison purposes only.   Compliance : European Commission Directive 92/69/EEC, method A16: NF T 20-036 (September 85). Chemical products for industrial use. Determination of the relative temperature of the spontaneous flamability of solids

• Country of Origin: India
• Type: Automatic
• Certification: CE Certified
• Application: Testing Use
• Color: Blue
• Voltage: 220V
• Warranty: 1 Year

• Application: Industrial Use
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw, 3-5kw
• Driven Type: Electric
• Warranty: 2years
• Brand Name: MSLR GLOBAL EXPORTS

• Power Supply: 220v, single Phase, AC
• Max Test Length: 500mm
• Capacity: Single & Double yarn can be tested

Amith Garments Digital Twist Tester is a used to evaluate Twist per Inch or Twist Per cm of Single& Double Yarn.Amith Garments Digital Twist Tester is completely made of Mild Steel which is duly powder coated for long life. It consists of a rotating jaw which is motor driven and next is stationary which is fitted on tensioning assembly. It works on twist-untwist method. Microprocessor based control panel is provided for setting the equipment according to single & double yarn. Digital display of TPI in the control panel is also provided. Tensioning weight from 1 – 50 g is supplied with the machine.

• Material: Stainless Steel
• Country of Origin: Made in India
• Features: Sturdy construction,Unmatched quality,Fine finish

Star automations provides complete solutions for the support and maintenance of high value electronic Printed Circuit Boards (PCBs) and modules.We are an electronic engineering company specializing in component level Repair with Automated Test Equipment.

We offer our customers a range of functionally advanced Slump Cones that are manufactured with precision. Our full range of products is of durable nature and high tensile strength.   We are one of the leading manufacturers and suppliers of compressor testing machines that find wide application in the construction industry. These machines are used to test the particular compressive strength and the sample of cubes or concrete cylinders by applying a load through this machine. We offer portable models that are very useful and convenient for transporting specimens to sites instead for testing in a standard laboratory. Supplied with special accessories, the machines can also be used safely for bricks. The machine has a load chassis with suitable plates and is equipped with a pumping unit with manometer. The machine operates manually or operates electrically according to customer requirements.   Characteristics: 1) Easy to use and Useful for hollow or solid concrete blocks (using a suitable capacity machine). 2) The pressure pipes connect the load chassis and the pumping unit.

• Material: Stainless Steel
• Power: 0.5kW
• Rod Diameter: 16 mm
• Finishing: Galvanized
• Rod Length: 600 mm
• Top Diameter: 20 mm

We are offering ductility testing apparatus, ductility testing apparatus: in flexible pavement construction, bitumen binders are used. It is important that bituminous material forms ductile thin film around the aggregates that serves as a binder. The binder material not of sufficient ductility renders pervious pavement surface and leads to development of cracks. Therefore it is important to carry out the ductility tests on bituminous material. Ductility is defined as distance in cms to which a standard briquette of bitumen can be stretched before the thread breaks. The briquette is stretched at a rate of 50mmminute ±25mm per minute at a temperature of 27ºc ± 0.5ºc. specifications: the apparatus consists of a water bath with a thermostatic heater, and a circulating pump to maintain uniform water temperature one half of the briquette moulds is fixed on a fixed plate in the water bath, the other half of the briquette mould is fixed to a carrier which slides over a rotating threaded shaft with a clutch the motor and gears to rotate the shaft are housed in a cabinet fixed above the other end of the bath. A pointer fixed to the carrier moves over a scale graduated from 0-110 cm x 1mm fixed on the bath with “0” (zero) of the scale towards the fixed plate side the rotating shaft has 2 speeds of travel for the bracket, 5 cmmin and 1 cmmin., selected by a clutch water bath inside is aluminum, it is an insulated water bath water bath is provided with a drain a heater with thermostatic control is fixed inside the water bath control switches for motor, stirrer, heater and indicator lamps are fixed at a convenient place on the water bath, complete with three briquette moulds and one base plate, all made of brass operates on 230 volts a.c. Single phase accessories: thermometer ip 38 c, range 23ºc to 27ºc ductility mould with base-plate.

• Brand Name: Veego
• Voltage (V): 230 VAC
• Automation Type: Automatic

Applications: Resistance to flame and ignition test on insulating material such as CFI outer insulating material, HID lamp cap insulating parts etc System Features / Technical Data: The heating element is made of Nickel/ Chromium (80:20) wire, 4 mm in diameter The temperature sensor is made of a sheathed fine wire of Cr/ A1 thermocouple resistant to a temperature of 1000 C Self adjusting current source is used to heat the Glow-wire up to preset temperature A microprocessor based PID temperature controller is used to control temp of glow wire. (Range: Ambient to 960C, Resolution: 1°C Accuracy: 1% Display: 4 Digit Red LED) Microprocessor based digital timer is used for pre-setting the test duration (Range: 0.1 999scc) with audio alarm to remove the test sample from the glow wire tip Digital time interval meter to record the burning time of the sample Glow wire penetration into the sample can be limited mechanically Provision to press the sample towards the glow wire tip with a force of 1 Newton In Auto models motorized forward and reverse motion for the movement of specimen with additional manual jog switches Automatic start of the test and draw back of the sample after the pre-set test time with a single press button Manufactured confirming to IEC, BSS and IS specification.

• Brand Name: BIOBASE
• Place of Origin: CHINA

Disintegration tester is used for detecting disintegration of solids under prescriptive conditions. 1. Auto-diagnose , auto-alarm. 2. Stainless steel basket and paddle. 3. Micro processor and LED Display. 4. The head part of the instrument can be turned over smoothly and flexibly . 5. Water circulating in the bath to keep the temperature conformity with magnetic pump.

It is specifically designed for disintegration testing of tablets, suppositories, capsules and other solid dosage medications. It complies with USP,BP, JP requirements.

• Other details: 2720 Part XV
• Feature: Long service life,Easy maintenance,Abrasion resistant

• Brand Name: NATIONAL INSTRUMENTS
• Voltage: 230V
• Color: ANY
• Type Of Testing Machines: Test and Measurement
• Frequency: 50HZ
• Grade: A
• Usage/Application: TESTING
• Location: India
• Service Mode: Offline
• Service Type: Automated Test Equipments

Digital tablet friability test apparatus (Micro Processor Based) Unit with single drum or double drum quiped with lcd display digital preset rotation counter.

Get Ahead with the best ATE test solutions from testamatic. Our integrated solutions comes from over 75 years of multi-industry expertise. With 100+ successful projects behind us, you can expect great test automation features, bed of nails fixtures, ergonomic designs with small footprints.

• Material: Cast Iron
• Voltage: 230 volts
• Automation Grade: Automatic
• Brand Name: Smarcon
• Country of Origin: Made in India
• Frequency: 50 Hz

• Application: PACKAGING INDUSTRIES & LABS
• Color: SIEMENS GREY
• Application: INDUSTRIAL & LABORATORY
• Brand Name: WEIGHMATICS
• Material: MS POWDER COATED WITH BOROSIL FLASKS
• Type Of Testing Machines: TO TEST BULK DENSITY OF POWDERS/GRANULES/FLAKES
• Size: 200 MM X 300 MM X 450 MM

We are the leading supplier of this products.

Electronic Pipettes, Dissolved CO2 Sensors, Dissolved Ozone Sensors

computer automated test equipment, Insulation Resistance Meters

automatic test equipment, automatic optical inspection system

Friability Test Apparatus, Laboratory Ovens

Bulk Density Meter, tea blending machines, dense phase conveyors

Single Gas Detector, Water Leak Detector, Hydrogen Gas Leak Detector

automated test equipments, electronic warfare suite controller

automated test equipments, diagnostic tools, Pressure Meter

automatic test equipment