Transducers Dealers in Chennai

M4030 simultaneously measure several variables of electric power system and converts them into 3 or 4 analog output, Modbus (RS485) communication, output &power system simulation, acquisition of meter data, password protect, 4 integrated energy meters, mark setting, universal Aux

• Model: M Turbo,Edge,Micromaxx
• Brand: Sonosite
• available: New , Used and Refurbished

• Number Of Flower: Current Transducer
• Material: Plastic
• Condition: New
• Power: Electric
• Total Carbohydrate: 1yrs
• Output: 20ma
• Load resistance: 0-500ohms
• Country of Origin: India
• Output: 4 ... 20 mA
• Accurcy: Class 0.25
• Input: 5A / 1A
• Aux Supply: 95 - 240 VAC
• Mounting: Din Rail

Compact, low profile design available with and without display. 8 types of probes available for a vareity of applications. Probes quickly and easily attachdetach. 0-5V 4 - 20mA Output.

We are offering Orthomode Transducer (OMT) •Typical Application in Orthogonal Dual-Polarized Antenna Feed System (i.e. VSAT) •OMT separatecouple the orthogonal signals excited at common port •Connects LNB or Antenna Down-converter and High Power Amplifier in the Antenna Feed System •Frequency Range from 5 to 40 GHz, Customization of Design available

Elcometer has a wide range of transducers available for use with the Elcometer 205, 206, 206DL, 208 & 208DL Ultrasonic Thickness Gauges. When selecting a transducer, it is important to choose one which will meet the application, taking the following into consideration: Whether the shape of that substrate is flat or curved or hard to reach.

• Range: 0-50 Bar
• Accuracy: 0.5% FS; 1% FS
• Output: 1.5mV/V , 2mV/V
• Non-linearity: 0.2% FS
• Reliability: 0.2% FS
• Input Voltage: 24VDC ( 4-20mA,0-10V, 0-5V
• Output Voltage: 5 V DC ( 0.5-4.5V output ) 10V DC ( 1.5mV/V , 2mV/V output )
• Operate Temperature: -20
• Overload Pressure: 150% FS
• Medium Material: Stainless Steel (SS304 or SS316)

• Output: 4-20mA - 1 No.
• Load resistance: 500Ω (Max.)
• Model: PWT9060V
• voltage input: 80 - 520V AC line to line for LT
• Response Time: <500 msec. for step change 0-90%
• Box Dimension: 70 x 100 x 110 mm (Single)
• Mounting: DIN Rail

• Brand Name: PRIGNITZ
• Current Rating: 4 - 20 MA, 0 - 10 V
• Media Type: Gas
• Range Setting: 600 mbar - 4000bar
• Contact System Type: NOT APPLICABLE
• Electrical Connection: Screw Terminals
• Contact Material: Silver
• IP Rating: IP 55

• Brand Name: Honeywell
• Availability: 150 gram
• Accuracy: 0.1-0.2 %FSS BFSL
• Output: 0 Vdc -10 Vdc
• Frequency: 3500 Hz
• Power/Voltage: 9 VDC to 28 VDC
• Operating Pressure: 0.36 psi to 5000 psi
• Wetted Parts Material: Ha C276 and 316L stainless steel
• Input Current: 4 mA to 24 mA
• Output At Null Pressure: 4 mA +/-0.5 % FSS
• Full Scale Span: 16 mA +/-1 %FSS
• Reverse Voltage Protection: Yes,28 V
• Insulation Resistance: More than 500 MOhm to case GND
• Overvoltage Protection: More than 32 V
• Power Up Time: Upto 1 sec

• Number Of Flower: Transducer
• Material: Aluminum, Plastic, Stainless Steel
• Availability: 0-2kg, 2-4kg, 4-6kg, 6-8kg
• Feature: Accurate Results, Durable, Excellent Performance, Fine Finished, High Quality
• Country of Origin: 12VDC, 24VDC
• Condition: New, Used
• Application: Static Application Use
• Frequency: 50hz, 60hz
• Power: Electric
• Phase: Diouble Phase, Single Phase, Tripple Phase
• Total Carbohydrate: 1yrs, 3yrs, 5yrs
• Output: 10ma, 12ma, 14ma, 16ma, 18ma, 20ma, 22ma, 24ma, 26ma, 28ma, 30ma, 4ma, 6ma, 8ma
• Load resistance: 0-500ohms, 1000-1500ohms, 1500-2000ohms, 500-1000ohms

• Availability: 1.7 Kgs
• Mains Voltage: 90 – 270V / 50 or 60 Hz
• Safety class: Class I, Type BF (IEC 60601
• Dimensions: L x B x H – 23 x 22.8 x 9.5 cms

Specifications : Frequency : 1 MHZ and 3 MHZTherapy modes : Continuous / PulsedPulse mode : 10,20,30,40,50,60,70,80, 90 & 100%Pulse Rate : 100HzIntensity :  0.1 – 3 W/cm2ERA Transducer L :  5cm2 ERA Transducer S : 0.8 cm2Pre-programmes : 47 Evidence based protocolsUser memory : 30 Re-writable positionsLCD Display : 128×64 pixelsTimer : 1 – 99 mins Description : DIGISONIC 3s is designed indigeniously with international standards with incomparable quality. The DIGISONIC 3S comes with 1 MHZ and 3 MHZ outputs with contact control sensor facility. Micro controller based circuitry with LCD display for viewing all parameters. 47 pre-programms and 30 re-writable user settable memory. Contact controls suspends the Ultrasound output when transducer contact with skin becomes insufficient. Easily selectable continuous and 9 pulsed modes soft touch keys for all functions. Features : 1 MHZ and 3 MHZ outputs in single transducer Contact control sensor Graphic LCD display Evidence based Pre-programmes User programmable memory Water resistant transducer Energy Efficient Two size transducer Compact and stylish Feather touch Cap-sense keys

• Number Of Flower: Transducer
• Material: Aluminum, Plastic, Stainless Steel
• Availability: 0-2kg, 2-4kg, 4-6kg
• Feature: Accurate Results, Durable, Excellent Performance, Fine Finished, High Quality
• Condition: New, Used
• Application: Static Application Use
• Frequency: 50hz, 60hz
• Power: Electric
• Total Carbohydrate: 1yrs

• Power Supply: 230V AC
• Application: INDUSTRIAL
• Frequency: 50 HZ

• Transducer Type: Active Transducer
• Brand Name: RISHABH
• Power: 40-300VAC/DC
• Country of Origin: 40-300VAC/DC
• Country of Origin: Made in India
• Linearity Error: 0.2
• Usage/Application: To convert AC Current in to Analog Signal
• Part Number: RISH CON CA (AVG)
• Product Type: Transducer
• Size: 65.5 * 22.5 * 100.5 mm
• Frequncy: 50Hz
• Accuracy: Class 0.2
• Mounting Type: DIN RAIL
• Resistance: 750 Ohms

• Availability: 300 gms
• Power Input: -24V DC for PIE Monitor 12V DC
• Temperature: -20oC to 70oC
• Fixing: Four 5 mm dia holes in the aluminium casing
• Input Connector: Miniature Coaxial
• Output Connector: 3 way Terminal Strip
• Sensitivity: 100mV/mil or 200mV/mil or 50 mV/mil
• Linearity: within /- 5% of the best straight line
• Frequency Response: DC to 10 KHz

• Size (W x H): 70 x 100
• Power supply: 230VAC or 110VAC , 50 Hz
• accuracy: 0.2%FS± 1 Digit

Transmission OP (DualSingle): Linear current (4 20 mA) or voltage (0-10VDC), Customized Transducer as per your application,Other features: Input calibration ( zerospan),Operating ambient: Temp.: 10C~60°C‚ humidity:

The air pressure in proportion to the current signal can be output. Wide output pressure range/0.02 to 0.6 MPa Fast response Independent electric unit/Explosion-proof (flameproof) construction Easy span adjustment

We offer a range of DIN-rail mounted solid-state transducers for process control and electrical panel instrumentation applications. These highly accurate devices cover a full range of electrical measuring parameters and are built to the highest standards to ensure a long service life. Our transducers have a response time of less than 300 milli-seconds, as per IEC 60688, and are available in a wide variety of transfer characteristics between input and output.

• Brand Name: SENSOMATIC
• Country of Origin: Made in India
• Capacity Range in kg: 50/100/150/200/250/300
• Material of Construction: High Nickel Alloy Steel
• Excitation: 10VDC
• Protection Class: IP 67
• Max Limit Force: 150

• Brand Name: Seetharam
• Model/Type: STDF
• Rated Capacity: 10-2000 Nm
• Rated Output: 1 mV/V +/-1%
• Nonlinearity: 0.3% (0.1kgf-m under 0.5% of R.O)
• Hysteresis: 0.3% (0.1kgf-m under 0.5% of R.O)
• Repeatability: 0.02% of R.O
• Terminal Resistance Input: 350 Ohm +/-1%
• Terminal Resistance Output: 350 Ohm +/-1%
• Insulation Resistance: 2000 M Ohm
• Temperature Effect On Zero Balance: +/-0.1% R.O/10 Degree C
• Temperature Effect On Rated Output: +/-0.1%Load/10 Degree C
• Excitation Recommended: 10VDC
• Safe Overload: 120% R.C
• Cable Length: 5.5 mm, 4 core cable, 3 m

  Pressure Transmitter [2200 Series-High Temperature] Overview / Design Principle: The 2200 series pressure transducer features stability and accuracy in a variety of enclosure options. The 2200 series pressure transducer feature proven CVD sensing technology, an ASIC (amplified units), and modular packaging to provide a sensor line that can easily accommodate specials while not sacrificing high performance.   Features: Millivolt, Voltage and Current Output Models Gauge, Absolute, Vacuum and Compound Pressure Models Available  Submersible, General Purpose and Wash Down Enclosures High Stability Achieved by CVD Sensing Element   Applications: Off Highway Vehicles Natural Gas Equipment Semiconductor Processing Power Plants Refrigeration Robotics HVAC

Elmec offer wide range of linear displacement transducers - linear sensors from 30mm to infinity length, works under principle of Resistive and Magnetic encoding method. This sensors are widely used in Plastic injection moulding machines, Hydraulic press, Sheet metal working machines, CNC machines and etc,. Our linear sensors, linear potentio meter are cost economic and reliable

• Power Supply: 230V AC
• Frequency: 50 HZ
• Features: Completely isolated between the Load current and the Output Signal, Fast response DC output based on the input current AC / DC.
• Output Range: 0-10V DC
• Model No: DAICC0101A
• Input Range: 10A to 100A AC

• measuring length: 30 m

Sealed linear encoders from HEIDENHAIN are protected from dust, chips and splash fluids and are ideal for operation on machine tools. Accuracy grades as fine as ± 2 μm, Measuring steps as fine as 0.001 μm, Measuring lengths up to 30 m (to 72 m upon request), Fast and simple installation, Large mounting tolerances.

This thing is given to our clients in the wake of being experienced a movement of stringent tests by our quality specialists. Ultrasonic Normal Probe is full in safe holders for giving security from mischief in the midst of dispatch handle.Our association is for the most part invigorating for giving Ultrasonic Normal Probe to clients.

• Brand Name: EDDYLAB
• Application: Displacement Measurement
• Country of Origin: Made in India
• Transducer Type: Displacement Sensor
• Linearity Error: 0.30%

The HI4105 carbon dioxide ion selective electrode is a complete potentiometric cell that contains both a silver/silver chloride (Ag/AgCl) reference and a pH measurement element. These elements are housed within a plastic body with a chloride ion-containing electrolyte, and are isolated from the sample by a gas permeable membrane made of polytetrafluoroethylene (PTFE). In solution, carbon dioxide reacts with water to form carbonic acid. Carbonic acid dissociates into bicarbonate and carbonate species. The concentrations of carbon dioxide, carbonic acid, bicarbonate, and carbonate species are pH dependent. As the pH of a solution becomes more alkaline, the equilibrium shifts to favor carbonate as the predominant species. A more acidic pH favors carbon dioxide as the predominant species. For the HI4105 to measure carbon dioxide accurately, it is important that the pH of the calibration standards and sample be lowered with the carbon dioxide ionic strength adjuster (ISA) solution. The carbon dioxide ISA ensures the pH of solutions is kept between pH 4.2 and 5.2. In this pH range, the carbonate and bicarbonate in solution are converted to carbon dioxide for an accurate measurement. The HI4105 carbon dioxide gas sensing ISE can measure from 400µM (17.6 mg/L) to 0.02M (880 mg/L).