Refrigeration Spare Parts Dealers in Coimbatore

Dry Cooling towers are produced in forced draught and induced draught designs, and in single and multi-fan arrangements, depending customer specifications and requirements, We are the professional dry cooling tower and air cooled condenser manufacturers, tubes in copper and fins are aluminium MOC we use 58’ or 38’ OD copper tubes as per customer specification, all tubes are well expanded tested for pressure and leak.

Components of Air Cooled Condenser System   Ejectors 3Bellows Instrumentation Pipe Lines Strainers Valves Civil construction Cleaning system Fans ,Motor & Gear box Parts of Air Cooled Condenser System   Expansion bellows Hogger Ejection system Condensate extraction pumps Drain pot Pumps Inter condenser After condenser Condensate storage tank Gland steam condenser Drain Pot Difference Between Air Cooled Condenser and Water Cooled Condenser Air Cooler   An air condenser is generally a lesser amount of valuable for condensing gases, for the reason that of the slower cooling time. However, if the gases are extremely hot, the icy water be able to cause the condenser to crack.   Air cooled condenser remove heat by blowing air over the condenser coil. The Air cooled condensers, as well referred to the same as "fin and tube" condensers, are in all probability the most able to be seen component in an air conditioning system, be it a room or packaged air conditioner or a packaged chiller.   If the condenser has water curving interested in the top part first, it will just run in a straight line through and not cool the vapour. by means of filling it from the base, the water is forced into the condenser and fills it totally. Water cooled condenser remove heat by pouring water over the condenser coil.   Spares of Air Cooled Condenser   The below spare lines also have required valves for operation. By this way the continuous operation of Condensation system is ensured by JC Equipments Pvt Ltd.   Inter and after condenser Ejectors Condensate extraction pump Drain pumps   Air Cooled Condenser Working Principle   Air Cooled Condensers Types   Natural Convection Forced Convection.   Natural Convection occurs when a heater with a reduction of dense fluid is pressed left by a cooler denser fluid.   Forced Convection occurs when an outer force pushes a fluid, such the same as water of air, to create it move about and transfer heat.   Air Cooled Condenser Design   The nearly all accepted style of Air Cooled Condenser is the modularized ('A' frame structured design), used on industries and power plants of all sizes. Our design teams are updated new technology of the Air Cooled Condenser design for all types of industries. The Air Cooled Condenser design group will discuss about Technical aspects of Air Cooled Condenser for Power Plants and also more industries. The 'A' frame structured designs are mostly used in the power plants. Coil Design : Advanced Smart Circuitry Coil Technology Our Air Cooled Condenser Design Process Contains for Thermal Design. Air Cooled Steam Condenser Problem   A successful air cooled steam condenser be required to continuously and totally gather and ejection all of the non condensables in the system. The non condensable are left behind inside the tubes and headers when the steam condensers   Applications of Air Cooled Condenser   All Thermal power plants Gas based Plants Coal based plants Oil Plants Biomass power plants Refrigerant hot gas piping Nuclear power plants

With the aid of skillful professionals, we present a comprehensive range of Fruits Condenser. This product is available in diverse configurations. This product is extremely utilized by our customers for their top performance and longer service life. Our provided range of products is examined on definite quality parameters before its dispatch. We offer various models of products to suit dissimilar necessities of the customers. Features: Compact construction Longer working life High strength

We are leading manufacturers and suppliers, exporters of air cooled condenser in india and the condenser types are Natural Convection,Forced Convection and also manufacture the Water cooled condenser. Coal based and All Thermal power plants, Solar Power Plants, Nuclear power plants, Gas Based Power Plants.

Air cooled condenser is a heat-exchange system. Conversely, the vapour can be fed through the tubes with the coolant water or air flowing around the outside. Air cooled condenser, the coolant flows through the tube side and distilled vapor through the shell side with distillate collecting at or flowing out the bottom.Air cooled condenser are also used in industrial-scale distillation processes to cool distilled vapor into liquid distillate.

Air Cooled Condenser condensate exhaust steam from the turbine and it return the condensate to the boiler. That is in power plants steam is used to rotate the turbine. After the application, the steam will be a waste one. So as an economical part of operation, the steam is re condensate to water and then re-used for boiler feed water. The Air Cooled condenser is made of modules arranged in parallel rows as like Air Cooled Heat Exchanger. The module contains number of Finned Tube bundle. The axial flow forced draft fan is fixed in the module and forces the atmospheric cooling air across the Condensate area of the fin tubes.

Water Cooled Condensers are used for cooling of the hot water in various industries. These condensers are made with precision and attention to each and every detail so that the best can easily be supplied to the client. These evaporative condensers are easy to install and can be customized according to the technical details furnished by the client.

An air condenser is generally a lesser amount of valuable for condensing gases, for the reason that of the slower cooling time. However, if the gases are extremely hot, the icy water be able to cause the condenser to crack. Air cooled condenser remove heat by blowing air over the condenser coil. The Air cooled condensers, as well referred to the same as "fin and tube" condensers, are in all probability the most able to be seen component in an air conditioning system, be it a room or packaged air conditioner or a packaged chiller. If the condenser has water curving interested in the top part first, it will just run in a straight line through and not cool the vapour. by means of filling it from the base, the water is forced into the condenser and fills it totally. Water cooled condenser remove heat by pouring water over the condenser coil.Air Cooled Condenser for all types of Thermal Power plants and indusries, Oil Plants and Gas Plants. JC has the good quality manufacturers and installing capability to supply the most excellent air cooled condenser for every applications.

The manufacturing of air cooled condenser is made of modules arranged in parallel rows as like air cooled heat exchanger. The air cooled condenser condensate exhaust steam from the turbine and it return the condensate to the boiler. That is in power plants steam is used to rotate the turbine. After the application, the steam will be a waste one. So as an economical part of operation, the steam is re condensate to water and then re-used for boiler feed water. If your air cooled condensers (acc) are not operating at their optimum they are losing money. by using tube tech international’s innovative air cooled condenser cleaning service lower production rates, higher mechanical costs, higher maintenance costs plus lost time in both machinery and manpower will be problems of the past. Air cooled condenser tube cleaning with specialist industrial cleaning will make a huge difference to your operation. You will increase performance, improve safety, reduce your carbon emissions and reduce overall downtime the major benefits of air cooled condenser are: elimination of additional water usage from the condensing power cycle flexibility in power plant site selection decreased time required for plant permitting the fin tube is the core technology of the air cooled condenser. single-row condensers (src) - an elongated, flat tube with brazed aluminum fins. multi-row galvanized (mrc) - an oval tube with hot-dip galvanized steel fins.

We are United Heat Exchanger providing solution for Air condensation system for all types of Thermal Power plants.In systems involving heat transfer, a condenser ( Air Cooled Condenser )is a device or unit used to condense a substance from its gaseous to its liquid state, typically by cooling it. In so doing, the latent heat is given up by the substance, and will transfer to the condenser coolant. Condensers are typically heat exchangers which have various designs and come in many sizes ranging from rather small (hand-held) to very large industrial-scale units used in plant processes. For example, a refrigerator uses a condenser to get rid of heat extracted from the interior of the unit to the outside air. Condensers are used in air conditioning, industrial chemical processes such as distillation, steam power plants and other heat-exchange systems. Use of cooling water or surrounding air as the coolant is common in many condensers.   Specifications : A condenser unit used in central air conditioning systems typically has a heat exchanger section to cool down and condense incoming refrigerant vapor into liquid, a compressor to raise the pressure of the refrigerant and move it along, A fan for blowing outside air through the heat exchanger section to cool the refrigerant inside. Applications : A typical configuration of such a condenser unit is as follows: The heat exchanger section wraps around the sides of the unit with the compressor inside. In this heat exchanger section, the refrigerant goes through multiple tube passes, which are surrounded by heat transfer fins through which cooling air can move from outside to inside the unit. Advantages : There is a motorized fan inside the condenser unit near the top, which is covered by some grating to keep any objects from accidentally falling inside on the fan. The fan is used to blow the outside cooling air in through the heat exchange section at the sides and out the top through the grating. These condenser units are located on the outside of the building they are trying to cool, with tubing between the unit and building, one for vapor refrigerant entering and another for liquid refrigerant leaving the unit. Of course, an electric power supply is needed for the compressor and fan inside the unit.

Ammonia condenser offered by us has found its usage in diverse industrial segments. Manufactured using cutting edge technology, our ammonia condenser is available in the market at the most competitive market.

Car AC Condenser, Car AC Compresso

Water Cooled Condensers, Heat Exchangers, Auto Drain Valves, Cooling Tower

TV Unit 

AC Condenser, Packaged Chillers, Chiller Control Panels, Air Blast Freezer

AC Condenser, Condenser

Air Cooled Condensers, Air Cooled Heat Exchanger, Cooling Tower

Refrigeration Condenser, Finned Tube Heat Exchanger, Marine Heat Exchange

Condensers, Double Pipe Heat Exchangers, Air Heat Exchanger

Freezer Door, Industrial Strips Curtains, Simplex Bobbi